MagEZ from Pitaka.

[treimche]

I'm looking for feedback from anyone using the MagEZ Card Sleeve from Pitaka along with their MagEZ case. Pitaka didn't have any videos showing how strong the hold is between them, and I feel it is very important for it to be pretty strong so I don't somehow end up losing my ID and credit card if it ever falls off.

I'm also wondering if anyone knows what size the ball is on the Pitaka MagEZ Mount? It looks like they offer the magnetic mount with no charging, which is what I want, but they have 3 different options, and none of them will work where I want to place my car mount. I'm hoping that the ball on these mounts is a standard Ram mount sized ball so I can use a different base.

MagEZ Card Sleeve: https://www.ipitaka.com/products/magez-card-sleeve?variant=32177145020486

MagEZ Mount: https://www.ipitaka.com/products/magez-mount?variant=12144478945350

 

[KepsInscription]

Hmm interesting. I was looking at the MagBak case and wallet. Seems very similar to this. However, there are videos of it.

 

[Gjwilly]

The Q&A on the Amazon website says the ball mount is 17mm.
It’s also cheaper on Amazon.
Mine should arrive today.

 

[jeepik]

The ball is standard size

I have been using pitaka for several generations and they always fit on the ball mount for my pro-clip mounts

 

[treimche]

The Q&A on the Amazon website says the ball mount is 17mm.
It’s also cheaper on Amazon.
Mine should arrive today.

The ball is standard size

I have been using pitaka for several generations and they always fit on the ball mount for my pro-clip mounts

So do you guys think that one of these will work with the Pitaka? They both say 1" I guess but I'm hoping that it will still fit and tighten up in the Pitaka mount.

RAM Mounts RAP-B-238U Composite Diamond Ball Base with B Size 1" Ball

The RAP-B-238U consists of a 1" diameter rubber ball connected at right angles to a 2.43" x 1.31" diamond base. The base has two holes 1.912" from center to center, matches the industry standard AMPS hole pattern and will connect to a large variety of RAM Mount and third party cradles.

www.amazon.com

Ball Head Mount Adapter (1-Inch Diameter Ball) with Thumb Screw for GoPro 11/10/9/8/7/6/5 Black,Session 5/4 Action Cameras

www.amazon.com

 

[treimche]

Well I guess this helps answer my previous question, but I don't know which one is standard size, the 17mm or the 25mm (1").

iBOLT 25mm / 1 inch to 17mm Composite Ball Adapter for Industry Standard Dual Ball Socket mounting arms- Works with All Industry Standard B Size/ 1 inch / 25mm and Garmin GPS 17mm Brackets

This iBOLT 25mm to 17mm Dual Ball Mount arm is made out of a sturdy composite material and is compatible with all industry standard 1 inch / 25 mm mounting arms. Ball joints are coated in a rubber material. Commonly used as an converter with IBBZ-33921 or IBBZ-33791 and other industry standard 25...

www.amazon.com

 

[Gjwilly]

So do you guys think that one of these will work with the Pitaka? They both say 1" I guess but I'm hoping that it will still fit and tighten up in the Pitaka mount.

RAM Mounts RAP-B-238U Composite Diamond Ball Base with B Size 1" Ball

The RAP-B-238U consists of a 1" diameter rubber ball connected at right angles to a 2.43" x 1.31" diamond base. The base has two holes 1.912" from center to center, matches the industry standard AMPS hole pattern and will connect to a large variety of RAM Mount and third party cradles.

www.amazon.com

Ball Head Mount Adapter (1-Inch Diameter Ball) with Thumb Screw for GoPro 11/10/9/8/7/6/5 Black,Session 5/4 Action Cameras

www.amazon.com

I just measured the ball on my other car mount.
This one.

Magnetic Phone Car Mount - FITFORT Universal Dashboard Car Phone Holder with Strong Suction Cup and Comes with Air Vent Holder Compatible with Apple iPhone 11/XR/Xs/8/7/6S & Android Phones

Magnetic Phone Car Mount - FITFORT Universal Dashboard Car Phone Holder with Strong Suction Cup and Comes with Air Vent Holder Compatible with Apple iPhone 11/XR/Xs/8/7/6S & Android Phones

smile.amazon.com

And it’s also 17mm. 1” seems like it would be way too big.

 

[Gjwilly]

The Pitaka EZ Mount came today and the ball is 17mm.
I can put just the magnet part on my existing dash mount (linked above).
I don’t have a Pitaka case but the Pitaka magnet works with both the Evutec case and the Molzar case that I just got.

 

[treimche]

The Pitaka EZ Mount came today and the ball is 17mm.
I can put just the magnet part on my existing dash mount (linked above).
I don’t have a Pitaka case but the Pitaka magnet works with both the Evutec case and the Molzar case that I just got.

Thanks a bunch for verifying this! It helps a ton.

 

[Matt-PITAKA]

The ball of the MagEZ Mount is 17.3mm.

And here's one review video of the MagEZ/Air Case for iPhone 12 and MagEZ Card Sleeve.

 

[JW313]

I have a brand new mag EZ case for iPhone 12pro id be willing to sell someone here at a discount.

 

[jeremydc]

Why?

 

[treimche]

If it was for the 12 Pro Max I'd be interested.