My Screen Isn't Working After DIY Battery Replacement

Discussion in 'iPhone Tips, Help and Troubleshooting' started by blueboxer, Oct 22, 2009.

  1. blueboxer macrumors newbie

    Oct 22, 2009
    Iphone 3g

    I bought a battery and did a DIY. The battery install was easy.

    But now my screen insn't working. :mad:

    I have assembled and reassembled numerous times. Still nothing. I check all the connectors and they seem to be connected snuggly. (The connection 3 was very difficult to get back in.)

    The phone is working. If I insert my sim card, it rings. The home button works, the top button works. Everything is ok, expect for the screen. No image!

    Any ideas what the problem could be>? Google wasn't any help.
  2. Gadgetgeezer macrumors regular

    Oct 4, 2009
    Reboot by lifting up logic board off battery and then screw back in. Check connectors again - lcd might be popping off board on re-assembly. You will get it going. Assume you were very careful and didn't damage lcd at all.

Share This Page