New Charger Cube

Discussion in 'iPhone Tips, Help and Troubleshooting' started by langolier, Mar 4, 2015.

  1. langolier macrumors newbie

    langolier

    Joined:
    Nov 9, 2007
    #1
    I just bought a new Noodle Flat Sync USB Data Cable Cord 3FT + wall charger (5v 1000mA) and recharged my iPhone 6. Now all it will do is show the Apple logo, flash to an entirely red screen, go black and then go back to the Apple logo.
    When I plug it into the USB port on my MBA my MBA tells me 'USB Devices Disabled. Unplug the device using too much power to re-enable USB devices'.
    Any ideas what happened?
     
  2. Intell macrumors P6

    Intell

    Joined:
    Jan 24, 2010
    Location:
    Inside
    #2
    What happens when you use the OEM Apple cable and charger?
     
  3. langolier thread starter macrumors newbie

    langolier

    Joined:
    Nov 9, 2007
    #3
    Plugged it in, sat with it about 5 min. No change - same cycle.
     
  4. Intell macrumors P6

    Intell

    Joined:
    Jan 24, 2010
    Location:
    Inside
    #4
    You may have damaged your iPhone with the third party cable or charger.
     
  5. dictoresno macrumors 601

    dictoresno

    Joined:
    Apr 30, 2012
    Location:
    NJ
    #5
    Yea I would take it to apple and have them run a diagnostic on it.
     
  6. BigMcGuire macrumors demi-god

    BigMcGuire

    Joined:
    Jan 10, 2012
    Location:
    California
    #6
    Back when I had my 4s/5 I remember the latest iOS update disabled most of my super cheap 3rd party iPhone cables. Now with my iPhone 6+ I figure that a third party cable is fine as long as it is "lightning" certified - meaning at least $9+ / cable.

    Been using the below cables without a problem.

    http://www.amazon.com/Certified-Pre...25568815&sr=8-2&keywords=anker+iPhone+6+cable

    Just got this one and it seems to be working fine.

    http://www.monoprice.com/Product?c_id=112&cp_id=11213&cs_id=1083101&p_id=10027&seq=1&format=2
     

Share This Page