New MBP won't stop kernel panics

Discussion in 'MacBook Pro' started by Andrew07, Oct 13, 2007.

  1. Andrew07 macrumors 6502

    Joined:
    Apr 25, 2007
    #1
    So I just got my brand new 15'' Macbook Pro, and with a Digidesign Mbox Mini connected to either USB ports, I get a kernel panic within seconds after connecting. http://www.sweetwater.com/store/detail/MBox2Mini . This problem occurred before and after installing the software for the Mbox. I am on 10.4.10 . With an iLok or my iPhone connected to either USB port I receive no kernel panic. I just switched from a 17'' MBP where the Mbox worked fine
     
  2. Andrew07 thread starter macrumors 6502

    Joined:
    Apr 25, 2007
    #2
    OK, so it was a problem with the software that comes with the Mbox Mini. I accidentally installed a PPC version then upgraded to the Intel version.

    Just now though, I got ANOTHER kernel panic when I disconnected the power adapter from my MBP. Should I be worried something is wrong with the logic board? Because I was getting the kernel panics everytime I connected the Mbox even before I tried installing any of its software. I don't get the descending black curtain when I get the panics, by the way. The "Hold down Shut Down Button" just pops up
     
  3. Killyp macrumors 68040

    Killyp

    Joined:
    Jun 14, 2006
    #3
    If it continues, then re-install OS X with an Archive & Install (not a complete wipe).

    If that then doesn't work, try a complete wipe of the HDD and re-install OS X.

    If you still get kernel panics, then check any hardware you have connected to the MBP isn't faulty (ie, test it with some other machine).

    If you still get issues, it's time to ring Apple.
     
  4. Dustman macrumors 65816

    Dustman

    Joined:
    Apr 17, 2007
    #4
    .. I'd check all other hardware before formatting.
     
  5. Andrew07 thread starter macrumors 6502

    Joined:
    Apr 25, 2007

Share This Page