Got a tip for us?
Let us know
Become a MacRumors Supporter for $50/year with no ads, ability to filter front page stories, and private forums.
iPad Pro No corner protection got my iPad Pro
- Thread starter Kyle76
- Start date
- Sort by reaction score
You got lucky. That isn't too bad and could have been much worse. Good thing you don't need a screen replacement.
No, I’ll take my chances and try to be more careful. Lesson learned. I switch back and forth between the case and the Magic Keyboard, so I like the ease of removing the folio and especially the light weight. I’ve got a leather sleeve ordered that would have prevented any damage at all.
Thought about that, but I have AppleCare, and they’d likely give me a new one.
This is the main reason I ordered the pitaka magez case. Had it on my 2020 pro and it saved my butt a few times. Glad it fits the folio and magic keyboard.
Yeah what’s that like? Been thinking about it, like OP i swap between folio and MGK. Is it light must be? mainly want it for using with no case so can sit it down anywhere to protect the back.
OP, oops i dropped it again damn screen smashed, and swap it out with AC plus.
That’s the obvious flaw with the folio style cases. Mine rarely leaves the house, so I prefer the neatness of the folio, but in a lot of ways the old style 2 piece silicone back and smart cover are better for protection.
It’s nice, made from aramid fiber and has a good grip! As for weight the 11 inch is 3oz and the 12.9 inch version is 4.4oz. I don’t really notice the weight of it. Just the feel. Definitely gives you piece of mind tho.
I just received a @pitaka MagEZ2 case today (compatible with the ‘21 iPad Pros) for the same reason as the OP.
Will hold off final judgment but atm I would wait before ordering.
Mine has compatibility issues with the Apple folio top cover. Top cover wont sit flat and magnets won’t engage/aren’t lined to keep it closed when it’s on the iPad. So it flips open if it’s held vertically or turned over. Also magnet strength holding it to the folio/mkb seems less vs when it’s removed.
Pretty annoying… always better right than fast @pitaka.
Sent email to them. Will circle back with their response. I have zero interest buying their folio, have 2 Apple folios already. Don’t need another.
Will hold off final judgment but atm I would wait before ordering.
Mine has compatibility issues with the Apple folio top cover. Top cover wont sit flat and magnets won’t engage/aren’t lined to keep it closed when it’s on the iPad. So it flips open if it’s held vertically or turned over. Also magnet strength holding it to the folio/mkb seems less vs when it’s removed.
Pretty annoying… always better right than fast @pitaka.
Sent email to them. Will circle back with their response. I have zero interest buying their folio, have 2 Apple folios already. Don’t need another.
Attachments
Last edited:
Heard back from @pitaka and the MagEZ2 case was not designed to be compatible with the Apple Smart Folio. So if you’re OK with the Apple folio cover NOT lying flat (as pictured) and flopping open, go ahead and buy it, otherwise look elsewhere. I hope this isn’t a misguided attempt to force a Pitaka folio cross sell.
Last edited:
Technically they only advertise it as a magic keyboard compatible case as for as apple cases go. But I’m running into this same problem. Thought it might be related to my screen protector since with a screen protector the folio on its own kinda struggles but still lies flat. There’s gotta be a way for this thing to stick down tho. Will update if I find anything. Also this thing is a perfect fit with the imos screen protector. So close to the edge!
Yeah but they DONT state it’s incompatible which is ********! If you look at the previous MagEZ case page, it CLEARLY states “MagEZ Case for iPad Pro 2018 & 2020 is not compatible with iPad Pro 2021.”
They solicited inputs from forum participants and guess they chose to ignore the most important “ensure compatibility with all Apple cases”. This product is going to be a complete flop. Theres a right way to generate cross sell revenue for their folio, this isn’t it.
I’m wondering if we remove this if it’ll sit better in the case.
I’m wondering if we remove this if it’ll sit better in the case.
Attachments
Last edited:
If it makes you feel better the 2018 case did the same exact thing with the Apple folio. And that was before they announced their own. I don’t think their is anyway to get it to work, this is all due to the thickness that the case adds which limits the folding part from stretching all the way over correctly. But I’m curious too what happens if we remove that piece. Don’t think it’ll help but you never know. It would probably work great with this case
Attachments
I think they can, just need to offset the lip outwards maybe 1-2mm or eliminate the raised portion/lip altogether. We really just want the side protection.
Lmk if that logo piece helps. I’m out of town so unable to mess with it but it looks like it’s just glued on. Thinking iPad sitting 1-2mm lower in the case may help.
ESR, could be… but the Apple stuff just works. No 2 ways about it.
Last edited:
I have the old MagEZ Case, not 2. They had stated the case is compatible with the magic keyboard and smart keyboard folio. That's it. So I knew it's not compatible with all Apple cases.
The case 2 page says the same thing.
There's no such logo piece on the old case. If they put it on the case 2, there's a reason for it. I wouldn't attempt removing it. Might mess things up.
Eh the case doesn’t work for me anyway. I’ll either try modding it or return it.
There might be a magnet behind it for the MagEZ iPad stand Pitaka now makes.
Maybe it provides a bit of pressure to ensure the iPad “snaps” into the case. Will need to examine it more closely when I’m back in town.
Definitely magnets behind it. apple wallet sticks to the back end really well now