Passive HDMI switch that works with AT4?

Discussion in 'Apple TV and Home Theater' started by trouble747, Jan 21, 2016.

  1. trouble747, Jan 21, 2016
    Last edited: Jan 23, 2016

    trouble747 macrumors 6502

    Joined:
    Jul 30, 2011
    #1
    I know there have been a few mentions of this issue but I was unable to locate a central thread about it. My AT4 doesn't work with my old HDMI switch that I used for AT3 (the signal will only properly passthrough if some other device attached to the switch is powered on).

    Anyone had any luck with a passive switch? Or do I need to swap it for a powered one? Frankly I've never had this issue with any HDMI device previously...
     
  2. trouble747 thread starter macrumors 6502

    Joined:
    Jul 30, 2011
    #2
    OK, let me rephrase: Has anyone else experienced the same issue that I'm having with a passive HDMI switch? :D
     
  3. NavySEAL6 macrumors 6502a

    Joined:
    Dec 13, 2006
    #3
    Mine works fine with a cheapo one from RadioShack that worked with my ATV 3. Maybe it's the switch itself? The conditions you mention to make it work reminds me of a device that suffered a power outage so try a new device.
     
  4. x-evil-x macrumors 68030

    x-evil-x

    Joined:
    Jul 13, 2008
    #4
    i have a matrix splitter 4 x 2 that works with the new Apple TV. i use it on my main tv and a hdmi 35 foot run to my tv in the bedrooms receiver.
     

Share This Page