Problem with touchscreen iPhone 3g

Discussion in 'iPhone Tips, Help and Troubleshooting' started by geshev, May 6, 2011.

  1. geshev macrumors newbie

    geshev

    Joined:
    May 6, 2011
    #1
    Hi to everyone !
    I am new here so please excuse me if i do a mistake .
    So i have a problem. I have broken my iphone's glass . Not only it was broken but the touch screen stopped working (from the top left to the bottom) . Yesterday i changed the digitizer+outter glass by my self but the touch still dont want to work. Any suggestions what might be the problem ?
    Thank you !
     
  2. Crystal-RX macrumors 68030

    Crystal-RX

    Joined:
    Dec 22, 2008
    Location:
    Seattle, WA USA
    #2
    few possibility problem,
    1. You received a defective digitizer.
    2. Your digitizer connection got loose when you put everything back together.
    3. They sent you the 3gs digitizer instead of 3g.

    open it p and make sure the connection is tight.
     
  3. geshev thread starter macrumors newbie

    geshev

    Joined:
    May 6, 2011
    #3
    I put the screen to other iphone 3g and it works perfectly .
    The weird thing is that on the old one it doesnt work only about 2 mm from left to right .
     
  4. Crystal-RX macrumors 68030

    Crystal-RX

    Joined:
    Dec 22, 2008
    Location:
    Seattle, WA USA
    #4
    If that the case, the there is something wrong with the connector on the logic board or the board itself. Might be clean the connector first. If it not fix the problem, then try to restore it and see if it works.
     
  5. geshev thread starter macrumors newbie

    geshev

    Joined:
    May 6, 2011
    #5
    I cleaned it and restore it but still the same .:mad::mad:
     
  6. geshev thread starter macrumors newbie

    geshev

    Joined:
    May 6, 2011

Share This Page