Become a MacRumors Supporter for $50/year with no ads, ability to filter front page stories, and private forums.
As I reported earlier in this thread, I had this issue, too, but now it's solved.

I did everything possible, even reinstalling macOS and not installing any third party software. The crashes persisted, during usage of the system but mostly in standby.

Now that I had the main logic board replaced by Apple, the problem is gone. I suspect it was malicious RAM. Apple's diagnosis tools couldn't reveal this issue. But since this problem persisted they finally agreed to replace the MLB. I'm a happy Mac user again.
 
I solved the problem of the sleeping monitor requiring a reboot by going to System Preferences>Energy Saver>Prevent Computer From Sleeping Automatically When The Display Is Off
 
Just wanted to provide a clue that I stumbled on, and a potential workaround. My problem was with a late 2015 iMac after adding an internal hard drive and trying to create a Windows boot partition using Boot Camp Assistant (which failed). The crashes were exactly the same as those reporting a blank screen or freezes requiring a restart after waking from sleep.

Briefly, I spent a week and tried everything to fix this: reset SMC and NVRAM, repaired the volume several ways, repaired permissions through the command line, reverted to old systems, and on and on. I went so far as to install a fresh Sierra system on a fresh internal SSD and still had the crashes/freezes. No apps or extensions added to the system – no partitions to the drive. All as vanilla as possible, and it still crashed on waking. It also happened when booting from external Thunderbolt drives.

The thing I found was that the system only crashes when I put it to sleep, not when I let it "fall" asleep. If you've got a MacBook, then closing your lid is the equivalent of putting it to sleep. I would suggest trying to let the machine fall asleep with the lid open or tilted... deep sleep, not just screen blanking. See if the machine wakes properly. It works well enough for me that I'm living with this small workaround. Apparently, there's a different code sequence for 'falling' vs. 'putting' to sleep.

If you're struggling with this, you've probably already searched a number of forums, and you've probably seen that this is not limited to recent operating systems or hardware – it dates back to at least 2009 as far as I could see. Sleep is also one of the trickiest things to get right with a Hackintosh, so I think it's a rather fragile part of the MacOS architecture... and one that appears to be getting even more fragile. It seems that hardware changes may trigger this, since it happened to me on fresh systems and boot drives that were previously problem-free. One thing I did not check was RAM – faulty RAM or motherboards were other reported causes, but I'm not sure that correlates with what you all have reported here.

I think it's time that Apple re-engineer this part of the system – it's obviously been problematic for a long time and is likely to only get worse as they lock down the system even more with SIP, APFS, default disk encryption (coming soon), etc.

In the meantime, I hope this helps somebody. I'll update if I find anything else along the way.

This may be the placebo affect, but it sure feels like the same scenario as me. Every morning (my closed MBP w/ 2 LG 5Ks plugged in went into sleep mode overnight on its own) I unplug it and open it up in the office without issue. When I'm in the office and I put it to sleep by closing the lid I plug it in back home and I get nothing but blank screens requiring a force reboot.
 
The thing I found was that the system only crashes when I put it to sleep, not when I let it "fall" asleep. If you've got a MacBook, then closing your lid is the equivalent of putting it to sleep. I would suggest trying to let the machine fall asleep with the lid open or tilted... deep sleep, not just screen blanking. See if the machine wakes properly. It works well enough for me that I'm living with this small workaround. Apparently, there's a different code sequence for 'falling' vs. 'putting' to sleep.

I have to babysit my 3000 dollar computer to sleep? This isn't a fix, this isn't a feature, this is looking more like a error that should be recognized by Apple and they should offer the buyers who are affected a new computer without issues. They are pretty relaxed on replacing on this issue along with replacing the faulty keyboard, but there is no official statements addressing them. I shouldn't plug, play and pray on an Apple product. If I got a bunch of scrap hardware from friends and installed Linux on it, well, then the responsibility should lean on me, but this a premium computer with a premium price tag, not a one year old that doesn't go to sleep without a nanny.
 
Last edited:
Is there a resolution for this issue...? I am using High Sierra and I get this issue after reinstalling, as well as doing literally everything mentioned in the 3 pages of this forum. I only get this issue every 3-4 days or so, but its completely random.

I use my MacBook for work, and when I get to work, I plug my MacBook into power and then my monitor. I hit space bar or something on my Apple Keyboard and I will get my login screen on my monitor. Sometimes, when nothing shows up after about 15-20 seconds, I know I've ran into the issue and have to force restart my 2016 MacBook 15". I don't know what to do...I just want to use my external monitor...
 
I have been without the issue for a while, but when I started using it against a monitor again, the same issue is still there. Like kingmanj it will go 15-20 seconds and I know I will have to do a hard reset. Have tried everything. This seems to be an issue with all MacBook Pros released after 2016...

Upgrading from Sierra to High Sierra didn't address the issue.
 
Last edited:
Yup...its only when I plug it into my monitor using an HDMI...haven't tried a USB C monitor...

I hate the feeling of hard resetting it...makes me feel like I'm going to hurt something. Ugh, how is this not something that they are evening attempting to fix?! I don't want to go through this just because I want to work on a bigger monitor, and then go home with my MacBook.

I even got a yellow screen today on my monitor when I woke it from sleep after about 45min. Then, I unplugged it, hard reset it, and when it came back on, it said "setting up MacBook" and I had to check a few boxes, then it went back to normal...wth...
 
Just got off with Apple support, and after trying a couple of call center employees I got one that I could actually communicate with, that wasn't just reciting Apple support documentation and just trying to make me do steps twice in order to "fulfill" their job.

They say they have never accounted the problem before, I get a call back, now I have to wait a week for an engineer to look at my system logs and a video of the problem. Seems like a lot of people have been through this process...

Will update, when I get an answer.
 
Just got off with Apple support, and after trying a couple of call center employees I got one that I could actually communicate with, that wasn't just reciting Apple support documentation and just trying to make me do steps twice in order to "fulfill" their job.

They say they have never accounted the problem before, I get a call back, now I have to wait a week for an engineer to look at my system logs and a video of the problem. Seems like a lot of people have been through this process...

Will update, when I get an answer.


Awesome! Looking forward to hearing what they've got. I emailed tcook@apple.com to no avail...
 
I've been suffering with the same problem for months with my 2016 MBP. I'm on my 4th logic board from Apple and am still experiencing this issue several times/day when hooked up to external monitors via HDMI.

1st LB: flashing rainbow patterns and B key started repeating like crazy
2nd LB: kernel panic whenever hooking up to external monitors
3rd LB: kernel panic whenever pressing on fingerprint sensor
4th LB: sleep wake failure 70% of the time it wakes up

Not sure where to go next.
 
I've been suffering with the same problem for months with my 2016 MBP. I'm on my 4th logic board from Apple and am still experiencing this issue several times/day when hooked up to external monitors via HDMI.

1st LB: flashing rainbow patterns and B key started repeating like crazy
2nd LB: kernel panic whenever hooking up to external monitors
3rd LB: kernel panic whenever pressing on fingerprint sensor
4th LB: sleep wake failure 70% of the time it wakes up

Not sure where to go next.

Clear case to get a refund. Be sure to capture videos of it and you will be in the clear. Or get a complete replacement machine.
 
If I got a bunch of scrap hardware from friends and installed Linux on it, well, then the responsibility should lean on me, but this a premium computer with a premium price tag, not a one year old that doesn't go to sleep without a nanny.

What's with the hostility toward Linux on this forum? Have you tried running modern Linux OSes on good hardware? Runs like a dream. The only reason I started using OSX in the first place was because my job requires me having an Unix-like environment.

Back on topic, I suspect the only reliable way to fix the sleep-wake failure is to keep taking it to Apple for motherboard replacements. I've experienced this on a few of the older Macs I have, and reinstalling software, replacing ram, tweaking terminal etc, never truly got rid of the problem.
 
What's with the hostility toward Linux on this forum? Have you tried running modern Linux OSes on good hardware? Runs like a dream. The only reason I started using OSX in the first place was because my job requires me having an Unix-like environment.

Hehe, I use Windows, Mac and Ubuntu, still I think Linux demands more responsibility from the user as it is free and hardware configurations are not customized to the OS as you would get with purchasing a Mac or a Surface computer. I like Linux for solutions that are custom and needs configuration (servers), but as a daily driver I use my Mac and Windows. Not hostile, but I think a OS that is made on a kind of democratic open source code won't be able to have a clear expression as a hardware/software solution from Apple or Microsoft, at least not on the consumer side.
 
Hehe, I use Windows, Mac and Ubuntu, still I think Linux demands more responsibility from the user as it is free and hardware configurations are not customized to the OS as you would get with purchasing a Mac or a Surface computer. I like Linux for solutions that are custom and needs configuration (servers), but as a daily driver I use my Mac and Windows. Not hostile, but I think a OS that is made on a kind of democratic open source code won't be able to have a clear expression as a hardware/software solution from Apple or Microsoft, at least not on the consumer side.

My apologies! I work with Linux everyday and I must admit I'm a bit of a Linux fanboy, I reacted too soon. I still think, for average users Linux Mint can be a pretty headache free daily driver.
 
I have had this issue persistently since we had the machine (although no monitor, it simply and frequently fails to wake from sleep). It never bothered me because I always used shutdown instead of sleep, but I recently started to use sleep and so I thought I'd get it fixed. I'd already tried clean installs, NVRAM and SMC resets, and never have peripherals connected when it happens.

Took it to an Apple Store for the first time and the technicians said they couldn't reproduce the problem (unbelievable), so I was sent home with the same faulty machine (after losing access to it for five days). Went in the second time (with video evidence of the fault occurring) and the Genius Bar person was very helpful—I can't fault anything he did—and they agreed to "replace" the logic board by priority repair. I collected it earlier today, being told by one of the employees that it passed all testing, quickly went through the initial setup without configuring iCloud or FileVault, and put it to sleep so I could start reloading everything later in the day. Opened the lid about an hour ago for the first time since setting it up and I run into the familiar error dialogue saying it restarted because of a problem. The "Details" tab of the fault shows that, after being put to sleep at about 11:30, it had another kernel panic at around 14:00, leading it to a wake failure.

I am incredibly suspicious of the fact that the same issue is still present with the "replaced" logic board and disappointed that Apple would even allow a situation in which I rather cynically believe they didn't replace anything. I'll be returning to the Apple Store (with yet more video evidence) on Wednesday for the third repair case (fifth visit overall) on the same problem.

It's beyond annoying as I've essentially not been able to use the machine for the last three weeks. There's no point in installing anything given that it'll probably be sent in and wiped (again). Very disappointing experience with Apple Support this time around.
 
  • Like
Reactions: doitdada
I have had this issue persistently since we had the machine (although no monitor, it simply and frequently fails to wake from sleep). It never bothered me because I always used shutdown instead of sleep, but I recently started to use sleep and so I thought I'd get it fixed. I'd already tried clean installs, NVRAM and SMC resets, and never have peripherals connected when it happens.

Took it to an Apple Store for the first time and the technicians said they couldn't reproduce the problem (unbelievable), so I was sent home with the same faulty machine (after losing access to it for five days). Went in the second time (with video evidence of the fault occurring) and the Genius Bar person was very helpful—I can't fault anything he did—and they agreed to "replace" the logic board by priority repair. I collected it earlier today, being told by one of the employees that it passed all testing, quickly went through the initial setup without configuring iCloud or FileVault, and put it to sleep so I could start reloading everything later in the day. Opened the lid about an hour ago for the first time since setting it up and I run into the familiar error dialogue saying it restarted because of a problem. The "Details" tab of the fault shows that, after being put to sleep at about 11:30, it had another kernel panic at around 14:00, leading it to a wake failure.

I am incredibly suspicious of the fact that the same issue is still present with the "replaced" logic board and disappointed that Apple would even allow a situation in which I rather cynically believe they didn't replace anything. I'll be returning to the Apple Store (with yet more video evidence) on Wednesday for the third repair case (fifth visit overall) on the same problem.

It's beyond annoying as I've essentially not been able to use the machine for the last three weeks. There's no point in installing anything given that it'll probably be sent in and wiped (again). Very disappointing experience with Apple Support this time around.
[doublepost=1516671909][/doublepost]Here is my tale.



I have MacBook Pro (13-inch, 2016, Four Thunderbolt 3 Ports) purchased in early February 2017.



After multiple failures to wake which was at the end not helped by NVRAM or SMC resets I took the computer to my local Apple Store. They were unable to get the computer to function and they accepted it for repair under warranty. When I got it back they had replaced the main board, the battery and the display; basically everything. The computer came back with MacOS 10.12.6 installed. Before I reinstalled ANY of my software the computer began to show Sleep Wake Failure. I now have turned off sleep and that is how I will continue to operate so that I can salvage some of my investment in this machine.



My first Mac was a 128K Macintosh. This MacBook Pro will be my last Apple computer. As demonstrated by this support thread and my own experience, Apple has multiple software and hardware problems with its current generation Macs and it is clear that they are both unwilling and more importantly UNABLE to fix these problems.
 
[doublepost=1516671909][/doublepost]Here is my tale.



I have MacBook Pro (13-inch, 2016, Four Thunderbolt 3 Ports) purchased in early February 2017.



After multiple failures to wake which was at the end not helped by NVRAM or SMC resets I took the computer to my local Apple Store. They were unable to get the computer to function and they accepted it for repair under warranty. When I got it back they had replaced the main board, the battery and the display; basically everything. The computer came back with MacOS 10.12.6 installed. Before I reinstalled ANY of my software the computer began to show Sleep Wake Failure. I now have turned off sleep and that is how I will continue to operate so that I can salvage some of my investment in this machine.



My first Mac was a 128K Macintosh. This MacBook Pro will be my last Apple computer. As demonstrated by this support thread and my own experience, Apple has multiple software and hardware problems with its current generation Macs and it is clear that they are both unwilling and more importantly UNABLE to fix these problems.

If you're interested, I went back for that fifth visit and the solution they offered was to replace the entire Mac. They said it'd take a couple of weeks to get it shipped in. I said that was fine as I just wanted the problem fixed.

They called yesterday and I went in today to collect the replacement. To my pleasant surprise they have replaced my 2016 MacBook Pro with a like-for-like 2017 MacBook Pro. They said I couldn't keep the box and extra charger (it was a brand new computer as the technician came out with it still sealed) but I received a friendly call from them about an hour later saying I could keep the box and extra charger if I wanted (I didn't want or need to). It's been asleep a couple of times today and no issues. I'm putting it to sleep overnight to see how it goes.
 
If you're interested, I went back for that fifth visit and the solution they offered was to replace the entire Mac. They said it'd take a couple of weeks to get it shipped in. I said that was fine as I just wanted the problem fixed.

They called yesterday and I went in today to collect the replacement. To my pleasant surprise they have replaced my 2016 MacBook Pro with a like-for-like 2017 MacBook Pro. They said I couldn't keep the box and extra charger (it was a brand new computer as the technician came out with it still sealed) but I received a friendly call from them about an hour later saying I could keep the box and extra charger if I wanted (I didn't want or need to). It's been asleep a couple of times today and no issues. I'm putting it to sleep overnight to see how it goes.

I wish you luck.
 
Just delivered mine to a repair center with videos of the crash. They don't seem to care much about the crash report, and leave it up to the technicians, engineers or simple service folk to blindly fiddle. Mine was getting in pretty bad shape. I feel in the latter years they have too many products, so the service people can't really give you any dialog. When it was just the Mac, and that line was their bread and butter, they would ask you about what happened and try to diagnose it on the spot, now it is more like an assembly line. I guess I'll just have to take the route of servicing it three times, changing the motherboard and then using my consumer rights to get my money back.

Keys seemed to be sticky at times, sleep/wake with artefacts and colours, and now blown out speakers that play distorted as well.


 
If you're interested, I went back for that fifth visit and the solution they offered was to replace the entire Mac. They said it'd take a couple of weeks to get it shipped in. I said that was fine as I just wanted the problem fixed.

They called yesterday and I went in today to collect the replacement. To my pleasant surprise they have replaced my 2016 MacBook Pro with a like-for-like 2017 MacBook Pro. They said I couldn't keep the box and extra charger (it was a brand new computer as the technician came out with it still sealed) but I received a friendly call from them about an hour later saying I could keep the box and extra charger if I wanted (I didn't want or need to). It's been asleep a couple of times today and no issues. I'm putting it to sleep overnight to see how it goes.
What is the situation 30 hours later? I am looking at the 2017 model but I want to make sure the issue has been fixed, thanks
 
I'm having the same issue with my 2016 MBP 15". Very annoying! I don't use an external monitor. It only happens when I've let it sit overnight. The only resolution is to power off and reboot. Here is what mine looks like...


Notice the battery power bar in the middle of the screen that shows 10% even though it was charged to 100% It is completely locked up. Also notice the rainbow circle animated cursor.
 
Last edited:
I'm having the same issue with my 2016 MBP 15". Very annoying! I don't use an external monitor. It only happens when I've let it sit overnight. The only resolution is to power off and reboot. Here is what mine looks like...


Notice the battery power bar in the middle of the screen that shows 10% even though it was charged to 100% It is completely locked up. Also notice the rainbow circle animated cursor.

Replaced motherboard, top case with keyboard and battery on mine. Apple Care took the bill. No problems so far. Been up for almost two weeks without a crash. Plugging in and out an external monitor has been flawless. MacBook Pro 2016 15" with 450.

4:06 up 13 days, 7:23, 2 users, load averages: 1.05 1.12 1.18
 
Register on MacRumors! This sidebar will go away, and you'll see fewer ads.