Saving space rmbp with Bootcamp

Discussion in 'MacBook Pro' started by Roadking714, Mar 18, 2015.

  1. Roadking714 macrumors regular

    Joined:
    Mar 7, 2014
    #1
    Any ideas on how to use a flash USB solely for Windows 8 on my mac since space is limited on my rmbp.. I want to use only the USB with out partitioning my mac books hard drive if it's possible
     
  2. yjchua95 macrumors 604

    Joined:
    Apr 23, 2011
    Location:
    GVA, KUL, MEL (current), ZQN
    #2
    Connect external drive to Windows VM. You must have a Windows VM in VMware/Parallels/VBox, or a Windows PC. Any existing Windows environment will do.

    What you need:
    install.wim file (obtain this from your Windows ISO)

    Open elevated cmd.exe (run as admin)

    Note: All commands aren't case sensitive, including pathway to files.

    Type diskpart
    Type list disk
    Take note of the disk you want to select
    Type select disk 1 (if your disk is Disk 1)
    Type clean
    Type convert gpt (stop at this point if you're using a Thunderbolt drive)
    Type create partition EFI size=100 (skip if installing in BIOS-CSM)
    Type format quick fs=fat32 label=EFI (skip if installing in BIOS-CSM)
    Type assign letter=S (skip if installing in BIOS-CSM)
    Type create partition primary
    Type format fs=ntfs quick label=W2G (or any other name you wish for label)
    Type assign letter=E
    Type exit

    Open up File Explorer. In your C drive, create a new folder named WIN2GO.
    Put the install.wim file in this folder

    Back in cmd.exe:
    Type dism /apply-image /imagefile:C:\WIN2GO\install.wim /index:1 /applydir:E:\ (this process will take quite a while)
    Type E:\Windows\System32\bcdboot E:\Windows /s S: /f UEFI (use this one for UEFI installation)
    Type E:\Windows\System32\bcdboot E:\Windows /s E: /f ALL (use this one for BIOS-CSM installation)

    Restart your entire Mac. After the chime, hold down Option and when prompted to select your boot drive, select EFI Boot.

    Proceed installation normally.

    After installation, install Boot Camp drivers. Feel free to trash the VM once you're done too.

    For best results, use USB 3/Thunderbolt. If you don't have USB 3, use Thunderbolt. If you have neither, stick back to the internal drive :)

    Note: This method involves reformatting the entire external drive.

    For Thunderbolt drives, just boot from the Windows USB installer and install directly onto the TB drive. Windows sees TB drives as an internal PCIe connection. However, you must format the TB drive as GPT first.

    CAUTION: Windows can only be installed in UEFI flawlessly on Haswell Macs and later. Ivy Bridge and earlier Macs can only run Windows in BIOS-CSM flawlessly. Attempts to boot a UEFI installation of Windows on an Ivy Bridge or earlier Mac will result in driver issues.

    UEFI-compatible Macs:
    MacBook Air (mid-2013 and later)
    iMac (late-2013 and later)
    Retina MacBook Pro (late-2013 and later)
    Mac Pro (trashcan shape)
    Mac Mini (late-2014 and later)

    Non-retina MBPs are not UEFI compatible.

    WinToUSB basically does the same thing, but doesn’t always work because WinToUSB doesn’t really take into account between BIOS-CSM and UEFI Macs; it only uses one method for all (which may result in boot failures and other problems).
     
  3. Roadking714 thread starter macrumors regular

    Joined:
    Mar 7, 2014
    #3
    Im trying not use my rmbps space and only use the USB stick for Bootcamp is it possible
     
  4. yjchua95 macrumors 604

    Joined:
    Apr 23, 2011
    Location:
    GVA, KUL, MEL (current), ZQN
    #4
    Did you even read what I posted?

    That's what my method does. It installs Boot Camp into a USB drive (PS don't ever use USB sticks, the NAND isn't designed for constant access like running an OS. Use an external drive).

    You must have an existing Windows environment. It can be a VM, a Windows PC, or an existing Boot Camp partition.
     

Share This Page