Scanning to Lion

blacksheepmac

macrumors newbie
Original poster
Nov 17, 2011
2
0
I use the scanning facility on our Konica Minolta 203( printer/scanner/copier) to scan to an imac, macbook pro & windows 7 laptop.

These are all on the same ethernet network. Scanning to all was was OK before installing Lion. Since then I cannot scan to the Mac computers but Windows is still fine. We have checked all the settings for scanning using SMB. All the addresses are Ok, but error message every try.
 

darster

Suspended
Aug 25, 2011
1,703
1
Have you checked if there were new drivers available for your printer on the Konica website?
 

TonyK

macrumors 65816
May 24, 2009
1,027
144
for my CanoScan 8600F I loaded new drivers. It might be good to do a search and see if anyone with your scanner and OS X Lion has had the same issue.
 

ragu

macrumors member
Sep 8, 2009
57
3
I use the scanning facility on our Konica Minolta 203( printer/scanner/copier) to scan to an imac, macbook pro & windows 7 laptop.

These are all on the same ethernet network. Scanning to all was was OK before installing Lion. Since then I cannot scan to the Mac computers but Windows is still fine. We have checked all the settings for scanning using SMB. All the addresses are Ok, but error message every try.
I would suggest removing and do a reinstall of your KM203 I had same issue with my brother MFC-795CW it worked after removal and a clean reinstall:)
 

blacksheepmac

macrumors newbie
Original poster
Nov 17, 2011
2
0
Scanning to Lion

Thanks for your suggestions. I found installing the latest driver did not help. (Minolta tech support said it wouldn't!). Will try new install & let you know outcome.
 
Register on MacRumors! This sidebar will go away, and you'll see fewer ads.