Become a MacRumors Supporter for $50/year with no ads, ability to filter front page stories, and private forums.

JuneJune

macrumors member
Original poster
Oct 10, 2020
68
97
Scandinavia
I have had every Apple Watch since series 0, and never had this issue unless I wore my watch extremely loosely.

I have a passcode and wrist detection on my watch. Ever since I got my s6, it has randomly locked while wearing. Same watch bands and tightness as all my previous watches. So it is either a software or hardware issue.

Has anyone else experienced this? There are no Apple stores in my country, so an exchange will have to be by mail, so I would like to hear if it might be software first... :)
 
Last edited:
  • Like
Reactions: RealPhone
There are already threads about this. It's usually because your strap is too loose, and is probably not a hardware or software issue.
 
  • Like
Reactions: Never mind
There are already threads about this. It's usually because your strap is too loose, and is probably not a hardware or software issue.
I searched and did not find a thread with this issue.
As i stated I have worn Apple Watches since series 0, and never had this problem, I know how tight to wear my watch. It does not happen when I switch to my s5 for instance.
 
I had an issue where my watch would lock immediately after unlocking it, but it went away after a couple days. I would just double check your tightness again and clean off the sensor on the bottom as a precaution. Mine always gets a good wash and polish after a few weeks of use.
 
Happened twice last week. Noticed that my watch was looser than normal and tightened it a notch. Fine since.

Probably because the weather here is suddenly a lot colder (wrists shrink). Same thing happened last winter. I also have to tighten my watch when swimming in cold water. Same reason.
 
This has been a non stop issue for me since I got my AW6... I came from the series 4 and this wasn’t a problem but I spend so much time every day unlocking my series 6. I have to unlock pretty much every hour starting around 10am. I even tried switch to the band from my series 4 thinking that was the issue and it still happens. It’s making me regret upgrading and is irritating honestly that I have to check my watch constantly to see if it locked and unlock and take it off to clean the sensor when I never had to do that with my series 4
 
  • Like
Reactions: JuneJune
Register on MacRumors! This sidebar will go away, and you'll see fewer ads.