Single slot GTX 1050Ti

Discussion in 'Mac Pro' started by Squuiid, May 11, 2017.

  1. Squuiid, May 11, 2017
    Last edited: May 12, 2017

    Squuiid macrumors 6502a

    Squuiid

    Joined:
    Oct 31, 2006
    #1
    A good card to use in a cMP with a GTX 680 (for boot screens) as it enables Displayport 1.4 and HDMI 2.0.

    As Dell has finally started releasing monitors using these new standards (UP3218K and UP2718Q) I hope it is only a matter of time before we get a 5K display using DP 1.4 which will mean one cable instead of the horrible two cabled MST solution present on current 5K displays.

    NOTE: This card is PCIe bus powered. 6/8 pin power not required.

    http://techreport.com/news/31888/inno3d-squeezes-a-geforce-gtx-1050-ti-into-a-single-slot#metal

    [​IMG]
     
  2. Flint Ironstag macrumors 6502a

    Flint Ironstag

    Joined:
    Dec 1, 2013
    Location:
    Houston, TX USA
    #2
    Good for Xserve.
     
  3. Filin Contributor

    Filin

    Joined:
    Mar 7, 2010
    Location:
    Ukraine
    #3
    It seems that the performance of 1050ti is almost the same as gtx 680

     
  4. Squuiid thread starter macrumors 6502a

    Squuiid

    Joined:
    Oct 31, 2006
    #4
    Yep, which is why this card would be very much to provide Displayport 1.4 and 5K output only. Not much more on offer here.
     

Share This Page