Start Posting Pics Of Cases With iPhone 6's In Them Already

[jldesutter83]

Where did you get the sticker?

www.grfxp.com I found the site on this thread someone else had a sticker on their leather case aswell.

 

[DPena14]

I suspect this is possible with most of the slim profile cases. Anyone know ETA of the lifeproof cases?

Is this the Ringke Fusion? What happened, ow big was this drop? Did it land straight on its face?

 

[Hustler1337]

I always wanted to get an aluminum bumper because I like the way they look and feel. But the thing that always kept me away was the full exposed back. But I just recently switched to this new aluminum bumper Infinite Case by Rock that has a hard acrylic back which is what I've been looking for. I had no idea this was even possible since most aluminum bumper cases snap on at a corner. The things I like about this case are: feels very solid, back is fully protected, buttons click are very responsive and feels just like original buttons, the microfiber lining on the inside of the bumper gives it a very snug and tight fit, and the color matches very well with the phone. Overall a very premium feel and look. Some things I do not like about the case are: installing is tricky and takes some time and care to learn the technique. It is not a case I can use to swap out often because of the care it takes to remove and install. It makes the phone a bit more heavier because of the aluminum. Also the mute switch is hard to access. But overlooking the cons it is definitely a worthy case for it's design.

Wow, this looks like it may be the perfect case for me, exactly what I was looking for in terms of design - sleek and looks close to the original design of the iPhone. Could you point me to an international eBay seller which sells this product? Thanks

 

[AuroraProject]

Too much chit-chat, not enough pics in this pics thread.

 

[RedlegsFan]

I'm dying to see a Speck Candyshell Grip for the iPhone 6 plus... especially if it's a Space Grey version. I am planning on grabbing the White case when it finally becomes available.

 

[macrumordude]

Custom Case Mate

Also posted in the iP6+ Case thread.

 

[waxlabo]

Wow, this looks like it may be the perfect case for me, exactly what I was looking for in terms of design - sleek and looks close to the original design of the iPhone. Could you point me to an international eBay seller which sells this product? Thanks

Sorry pal, I don't know of any international sellers yet. I will let you know soon as I find out.

 

[davew41]

A nice case i picked up that actually has some grip and protects the sides and camera

 

[sawah]

A nice case i picked up that actually has some grip and protects the sides and camera

What case is this please?

 

[Hustler1337]

Sorry pal, I don't know of any international sellers yet. I will let you know soon as I find out.

That's cool. What's the exact name of the case? Thanks

 

[waxlabo]

That's cool. What's the exact name of the case? Thanks

I think it's called "Infinite Case" that's what it says on the package.

 

[davew41]

What case is this please?

Xtreme Armour Phone Case for the iphone6

Actually got it at wallmart

 

[iMerik]

Funny you should mention that, I just picked up a Rock Clear TPU case tonight for $11 in Hong Kong and the buttons are extremely stiff.

I'm a bit disappointed in the button stiffness. It's quite extreme and takes some hard middle-of-the-button pressing to put my phone to sleep.

 

[soya]

 

[Dellfanboy]

View attachment 511241

View attachment 511242

View attachment 511243

View attachment 511244

I LOVE this setup. What case and screen protector?

 

[soya]

Start Posting Pics Of Cases With iPhone 6's In Them Already

Screen protector is a tempered glass MIME Feather+ for iPhone 6

and the case is a Johncase http://www.amazon.com/Johncase®-Col...=UTF8&qid=1415057057&sr=8-5&keywords=johncase



Depending on your luck, the case will arrive intact or slightly broken but it is identical to the Caudabe Veil for far less so it is worth the try

 

[boltjames]

I'm a bit disappointed in the button stiffness. It's quite extreme and takes some hard middle-of-the-button pressing to put my phone to sleep.

I've moved off the Rock clear case, I'm in my Apple black leather case 24/7 now.

BJ

 

[Ringside]

I've moved off the Rock clear case, I'm in my Apple black leather case 24/7 now.

BJ

I'm with you on that. Midnight Blue for me. Tried the Rock out of curiosity. It's dirt cheap so no big risk. Pretty disappointed in it. Bad alignment & very cheap feeling TPU. I have an even cheaper no-name clear eBay TPU case that is actually much better but I'm just over the whole clear case thing.

 

[3rdiguy]

Just got my iphone 6 plus today. Paid $1050 on Swappa. Verizon 128gb space gray. Came with SP installed and 3 cases. This is the Ringke Fusion I purchased myself.

 

[solodogg]

I'm a bit disappointed in the button stiffness. It's quite extreme and takes some hard middle-of-the-button pressing to put my phone to sleep.

i'm with ya, i can get over the cutouts not being 100% perfect, but the power button is a bit ridiculous.

Anyone know of any other thin cases that are thick enough to give camera lens protection along with bottom protection?

 

[fongyuen]

zoogue

I don't know if anyone's posted a zoogue case yet, but I just got mine yesterday.

edit: adding impressions (after 1 day's use)
-soft TPU, feels good in the hands, the ridges along the side help with grip, not sure how much protection it will provide.
-clean, simple, unassuming design, other than the large zoogue emblem on the back.
-the buttons are a little hard to press, preferred the open ports of my previous case. mute button is easily accessible. headphone jack might be a little small for bigger connectors.
-not a very tight fit, makes for easy install and removing from case for cleaning but I can see it becoming looser as time goes on.
-has a sufficient lip that will prevent the screen from touching surface when face flat.

 

[emailYasmin]

Incipio DualPro for iPhone 6 Plus

Love it.

 

[bobright]

Also posted in the iP6+ Case thread.

Which case is that?

 

[klilja]

I don't know if anyone's posted a zoogue case yet, but I just got mine yesterday.

edit: adding impressions (after 1 day's use)
-soft TPU, feels good in the hands, the ridges along the side help with grip, not sure how much protection it will provide.
-clean, simple, unassuming design, other than the large zoogue emblem on the back.
-the buttons are a little hard to press, preferred the open ports of my previous case. mute button is easily accessible. headphone jack might be a little small for bigger connectors.
-not a very tight fit, makes for easy install and removing from case for cleaning but I can see it becoming looser as time goes on.
-has a sufficient lip that will prevent the screen from touching surface when face flat.

[url=http://i201.photobucket.com/albums/aa11/fongyuen/IMG_0045.jpg]Image[/URL]
[url=http://i201.photobucket.com/albums/aa11/fongyuen/IMG_0048.jpg]Image[/URL]
[url=http://i201.photobucket.com/albums/aa11/fongyuen/6.jpg]Image[/URL]
[url=http://i201.photobucket.com/albums/aa11/fongyuen/7.jpg]Image[/URL]
[url=http://i201.photobucket.com/albums/aa11/fongyuen/8.jpg]Image[/URL]
[url=http://i201.photobucket.com/albums/aa11/fongyuen/9.jpg]Image[/URL]

Hey Where did you get the port plugs?! I need those in my life!

 

[AppleGirlZubay]

Anyone use the tempered glass screen protector? Thinking about getting one. Thanks