Become a MacRumors Supporter for $50/year with no ads, ability to filter front page stories, and private forums.
It fits. Here are the pics:

blade1.jpg

blade2.jpg

blade3.jpg

blade4.jpg

blade5.jpg
 
The Dimensions Of The 4

Are identical to that of the 4S....DOn't get ripped buy any company that say's stuff like"re-designed for the 4S" It's cr***


My guy at apple confirmed with m,y order....My Otterbox stuff is identical. So I ordered the clear case to go with....They are the same.
 
Are identical to that of the 4S....DOn't get ripped buy any company that say's stuff like"re-designed for the 4S" It's cr***


My guy at apple confirmed with m,y order....My Otterbox stuff is identical. So I ordered the clear case to go with....They are the same.

No you're wrong. The placement of the mute switch on the 4s is slightly higher than on the IPhone 4. So if you have a case that has a separate slot for the mute switch then it will not fit. The 4s is EXACTLY the same as the CDMA IPhone 4.
 
I'm Going To Confirm this

No you're wrong. The placement of the mute switch on the 4s is slightly higher than on the IPhone 4. So if you have a case that has a separate slot for the mute switch then it will not fit. The 4s is EXACTLY the same as the CDMA IPhone 4.

You may be right...So I'll double check, but that's what he told me. If my info/ is wrong then I will correct it.
 
I think the mute switch opening on the Blade is large enough to accommodate both the 4 GSM and CDMA. Check the pics on page 1, and keep in mind that I took them at an angle, so the switch looks higher in the opening than it is.

Bottom line: The Blade fits the 4s without any problems. Mine also had PowerSupport screens protectors on the front and back, and it still fit fine.
 
I think the mute switch opening on the Blade is large enough to accommodate both the 4 GSM and CDMA. Check the pics on page 1, and keep in mind that I took them at an angle, so the switch looks higher in the opening than it is.

Bottom line: The Blade fits the 4s without any problems. Mine also had PowerSupport screens protectors on the front and back, and it still fit fine.

Thanks for that. So where can we actually buy one from the uk not shipped from overseas?
 
We Are Both Right!

No you're wrong. The placement of the mute switch on the 4s is slightly higher than on the IPhone 4. So if you have a case that has a separate slot for the mute switch then it will not fit. The 4s is EXACTLY the same as the CDMA IPhone 4.

As posted below,it's close enough for :apple: to sell, but you make a valid point, close isn't good enough. I stand corrected!
 
For those of you with the iPhone 4S and the blade case, does it affect your signal, Wifi, or GPS (even with the new antennae)?

I've been reading through the forums and for some iPhone 4 users, they've experienced some degradations mainly on 3G signal and GPS.

Thanks.
 
For those of you with the iPhone 4S and the blade case, does it affect your signal, Wifi, or GPS (even with the new antennae)?

I've been reading through the forums and for some iPhone 4 users, they've experienced some degradations mainly on 3G signal and GPS.

Thanks.

I'd also like to know... It seems like no ones reading this thread anymore so I'll give it a bump.
 
I'd also like to know... It seems like no ones reading this thread anymore so I'll give it a bump.

Reviews I found said it's bad for the 4 because it drops the signal 1-2 bars. However, the 4S have the improved antenna so I'm not sure if that helped the situation.
 
Hi, I own the iphone 4s, and i was just putchase this metal case yesterday and manage to install it. This case rely make the signal and 3g suck, the signal start drop from 4bar to 3bar and the voice call are not clear at all…
 
Register on MacRumors! This sidebar will go away, and you'll see fewer ads.