Two Kernel Panics in three days; log included; please help?

Discussion in 'macOS' started by reubs, Sep 6, 2007.

  1. reubs macrumors 68000

    Joined:
    Jun 22, 2006
    #1
    Hey everyone...I've gotten two kernal panics in the past three days. I copied the report before sending it to Apple, and I was hoping someone might could look at it and tell me what went wrong...

    Thanks in advance.

    panic(cpu 0 caller 0x001A429B): Unresolved kernel trap (CPU 0, Type 14=page fault), registers:
    CR0: 0x80010033, CR2: 0x0c7d8172, CR3: 0x00d95000, CR4: 0x000006e0
    EAX: 0x0c7d816a, EBX: 0x00615648, ECX: 0x0000013b, EDX: 0x000009e0
    CR2: 0x0c7d8172, EBP: 0x2505bc78, ESI: 0x038bfe00, EDI: 0x087d8f80
    EFL: 0x00010206, EIP: 0x003bd433, CS: 0x00000008, DS: 0x25050010

    Backtrace, Format - Frame : Return Address (4 potential args on stack)
    0x2505bab8 : 0x128d08 (0x3cb134 0x2505badc 0x131de5 0x0)
    0x2505baf8 : 0x1a429b (0x3d0e4c 0x0 0xe 0x3d0670)
    0x2505bc08 : 0x19ada4 (0x2505bc18 0x10003 0xe 0x3820048)
    0x2505bc78 : 0x3bd504 (0x38279c0 0x38bfe00 0x2505bcb8 0x87d7940)
    0x2505bc98 : 0x38af33 (0x38bfe00 0x87da9a0 0x2505bcd8 0x3c29a3)
    0x2505bcf8 : 0x389f73 (0x38bfe00 0x87d7e80 0x0 0x4254750)
    0x2505bd38 : 0x38a175 (0x87d7e80 0x4 0x0 0x4254750)
    0x2505bd58 : 0x3b0a97 (0x87d7e80 0x4ae9a0 0x2c 0x0)
    0x2505bd78 : 0x189149 (0x37b5728 0x4254778 0x2505bdac 0x11cc32)
    0x2505bdb8 : 0x12b4c3 (0x4254750 0x65391a4 0x0 0x0)
    0x2505bdf8 : 0x124b17 (0x4254700 0x0 0x7c 0x2505bedc)
    0x2505bf08 : 0x195a42 (0x2505bf44 0x0 0x0 0x0)
    0x2505bfc8 : 0x19b21e (0x37f5c34 0x1 0x19e0b5 0x6dc7d00) No mapping exists for frame pointer
    Backtrace terminated-invalid frame pointer 0xbffff548
    kmod scan stopped due to missing kmod page: 00000000

    Kernel version:
    Darwin Kernel Version 8.9.1: Thu Feb 22 20:55:00 PST 2007; root:xnu-792.18.15~1/RELEASE_I386

    Model: MacBook1,1, BootROM MB11.0061.B03, 2 processors, Intel Core Duo, 1.83 GHz, 2 GB
    Graphics: Intel GMA 950, GMA 950, Built-In, spdisplays_integrated_vram
    Memory Module: BANK 0/DIMM0, 1 GB, DDR2 SDRAM, 667 MHz
    Memory Module: BANK 1/DIMM1, 1 GB, DDR2 SDRAM, 667 MHz
    AirPort: spairport_wireless_card_type_airport_extreme (0x168C, 0x86), 0.1.31.1
    Bluetooth: Version 1.7.14f14, 2 service, 0 devices, 1 incoming serial ports
    Network Service: AirPort, AirPort, en1
    Serial ATA Device: ST96812AS, 55.89 GB
    Parallel ATA Device: MATSHITACD-RW CW-8221
    USB Device: Built-in iSight, Micron, Up to 480 Mb/sec, 500 mA
    USB Device: iPod, Apple, Up to 480 Mb/sec, 500 mA
    USB Device: Bluetooth HCI, Up to 12 Mb/sec, 500 mA
    USB Device: IR Receiver, Apple Computer, Inc., Up to 12 Mb/sec, 500 mA
    USB Device: Apple Internal Keyboard / Trackpad, Apple Computer, Up to 12 Mb/sec, 500 mA
    FireWire Device: 1394 USB COMBO, Generic, Up to 400 Mb/sec
     
  2. richard.mac macrumors 603

    richard.mac

    Joined:
    Feb 2, 2007
    Location:
    51.50024, -0.12662
    #2
    i googled "kmod scan stopped due to missing kmod page: 00000000" which is the last line in your log before your system specs. i ended up finding this translated italian forum http://translate.google.com/transla...pped+due+to+missing+kmod+page:+00000000&hl=en
    reading through the replies, it looks like you have bad ram. do you have the factory ram installed or have made a ram upgrade? make sure your ram sticks are pushed all the way in correctly and then restart using mac os x install dvd 1 while holding the D key and perform a hardware check.
     
  3. reubs thread starter macrumors 68000

    Joined:
    Jun 22, 2006
    #3
    Wonderful. What I feared. Thanks for doing the legwork on that. I do have 3rd party RAM. I'll have to look into replacing it...thanks for the tips on the hardware check.
     

Share This Page