Become a MacRumors Supporter for $50/year with no ads, ability to filter front page stories, and private forums.

HaiHoai

macrumors newbie
Original poster
Aug 1, 2025
4
0
Hey folks,
I recently bought a used car (2015 Audi A5) and love everything about it—except the lack of Apple CarPlay. I've been looking into ways to retrofit CarPlay without replacing the whole infotainment system or spending a fortune at the dealership.
There seem to be a few options:
  1. Wireless CarPlay dongles/adapters
  2. Aftermarket screens (Android-based or Linux-based)
Has anyone here done a successful upgrade?
Ideally, I'd want:
  • Wireless CarPlay
  • Steering wheel button support
  • Keep my factory backup camera & parking sensors
  • Minimal dashboard surgery
Appreciate any insights or experiences!
 
We looked at this for a Mazda MX5, in the end we just got a car audio place to just replace the standard audio unit with an aftermarket one. Do now have a couple of unobtrusive cables to plug the phone into (it’s a wired one) but everything else works well (steering controls etc). Well worth doing IMO.
 
  • Like
Reactions: HaiHoai
I think it really depends on the condition and quality of your original screen and system.
For example, I have a 2011 BMW Z4 E89 — the original screen had low resolution and limited functionality, so I replaced it with a high-res CarPlay touchscreen. On the other hand, my wife’s 2013 Lexus GS already had a nice 12.3" OEM screen with a solid factory system, just no CarPlay. In her case, I installed a CarPlay box instead, which integrates wirelessly without replacing anything.
Both solutions cost a bit over $300 each, and I’m really happy with how both upgrades turned out. Wireless CarPlay works great, and the installs were relatively straightforward.
If anyone’s interested, I got both products from CarpuTech: https://www.carputech.com
 
  • Like
Reactions: HaiHoai
A third option, which I did with my 2014 VW:

Dash-mount your phone with a vent clip holder or something similar and connect audio to car bluetooth. You don't have to modify anything with your infotainment, and can still use your cameras and sensors. The steering wheel bluetooth controls can still be used for calling and music.
 
  • Wow
Reactions: _Mitchan1999
A third option, which I did with my 2014 VW:

Dash-mount your phone with a vent clip holder or something similar and connect audio to car bluetooth. You don't have to modify anything with your infotainment, and can still use your cameras and sensors. The steering wheel bluetooth controls can still be used for calling and music.
That works, but CarPlay offers more than just Bluetooth music and calls — like real-time navigation, traffic updates, and direct access to apps like Maps, Waze, Spotify, and Messages right on the screen. It's a much smoother experience overall.
 
That works, but CarPlay offers more than just Bluetooth music and calls — like real-time navigation, traffic updates, and direct access to apps like Maps, Waze, Spotify, and Messages right on the screen. It's a much smoother experience overall.
I definitely agree, just offering an economical alternative. $300 to replicate the same features already available on the phone screen with a $20 dash mount seems a bit extreme for a car that's already 10 years old. The full functionality of the phone and all its apps is available the same way. Bluetooth patches the audio through the car sound system just the same.
 
I replaced the OEM satnav unit (and climate control panel as well) with a third party replacement option. This was designed to fit and has CarPlay.

It uses a cable connection to the phone but I’m happy with that. I have tried wireless CarPlay adapters but they have all been terrible, slow and frequent lockups. Just completely unusable. Last one I had got thrown out.

The replacement unit also does Android auto but I don’t use an Android phone so no idea how that works.

Mainly I use Waze for navigation and knowing traffic conditions.
 
  • Like
Reactions: VanHah
We looked at this for a Mazda MX5, in the end we just got a car audio place to just replace the standard audio unit with an aftermarket one. Do now have a couple of unobtrusive cables to plug the phone into (it’s a wired one) but everything else works well (steering controls etc). Well worth doing IMO.
Thanks for the info! Replacing the whole unit sounds like a clean solution. Did you lose any factory features or have to deal with any compatibility issues?
 
I replaced the OEM satnav unit (and climate control panel as well) with a third party replacement option. This was designed to fit and has CarPlay.

It uses a cable connection to the phone but I’m happy with that. I have tried wireless CarPlay adapters but they have all been terrible, slow and frequent lockups. Just completely unusable. Last one I had got thrown out.

The replacement unit also does Android auto but I don’t use an Android phone so no idea how that works.

Mainly I use Waze for navigation and knowing traffic conditions.
Appreciate you sharing your experience! Sounds like a very practical upgrade. I’ve heard similar things about wireless adapters being unreliable, so a wired setup might actually be the better route.
 
Register on MacRumors! This sidebar will go away, and you'll see fewer ads.