Which TB4 dock to buy for new MBP14”

[Akapplefan]

Looking to purchase a thunderbolt 4 dock to use with my new MBP 14”.

Will have 2 x dell 27” 4K monitors to plug into it.

Which one is the best from your experience?
Any help is much appreciated.

 

[jck1634]

I got the Kensington SD5700T for my two monitors. runs perfectly. o HDMI or display ports though. Only Thunderbo9lt 4 ports and some usb a ports

 

[MrGunnyPT]

The Kensington and OWC ones are great.

I'm using a DELL TB4 that work sent me

 

[Hammie]

Any that support 120Hz? Most docks that I have looked at only note 60Hz support.

I am considering the Samsung Neo G9 ultra wide monitor to replace my two 27" ones.

I am still up in the air because the only difference from my current setup is the increase in Hz and the lack of the center bezel. Other than that, my two monitors are perfect.

 

[ProfessionalFan]

I use the Anker Apex dock and love it

 

[Akapplefan]

I use the Anker Apex dock and love it

That is what i just bought.
Do you have 2 monitors connected to it? If so how did you connect them? What ports?

 

[ProfessionalFan]

That is what i just bought.
Do you have 2 monitors connected to it? If so how did you connect them? What ports?

2 monitors, one at 144hz, other at 60hz. Both are 4k being scaled to 1080.

One is via HDMI (60hz one) and the other is using a USB-C to DisplayPort cable (144hz one)

 

[Akapplefan]

2 monitors, one at 144hz, other at 60hz. Both are 4k being scaled to 1080.

One is via HDMI (60hz one) and the other is using a USB-C to DisplayPort cable (144hz one)

I bought 2 Dell 4k 60hz monitors.

Would you recommend I plug them in from USB C (on the monitor) to HDMI on the 2 HDMI ports on the Anker?

 

[ProfessionalFan]

I bought 2 Dell 4k 60hz monitors.

Would you recommend I plug them in from USB C (on the monitor) to HDMI on the 2 HDMI ports on the Anker?

Don't think it matters.

Try the first way and if you run into any problems, try the second way. I'm guessing you'll find the same results on both.

 

[Akapplefan]

Don't think it matters.

Try the first way and if you run into any problems, try the second way. I'm guessing you'll find the same results on both.

Will do. Was thinking some ports limit monitor capacity or whatnot.