Sidebar Sidebar
Become a MacRumors Supporter for $50/year with no ads, ability to filter front page stories, and private forums.

6S/6s+ glass protector discussion [Merged]

hsnsky said:
Do you have a picture of this protector on your phone? I have purchased 5 of these for family members and all of them have an air bubble line on both edges of the screen. I had to return them all unfortunately.
Click to expand...


I tried with 2 different ones of this S/P and also had the same results.
 
Just ordered a replacement Daswise from amazon, hoping this one doesn't have a bubble along the edge...
 
Just ordered this 2.5D Ice Core from Godosmith.

https://www.amazon.com/gp/aw/d/B010ALZJ9A/ref=ya_aw_od_pi?ie=UTF8&psc=1

The reason I went with 2.5D is because I wanted a slight gap to accommodate my Power Support Air Jacket. I also wanted something thinner than Daswise, which this is at 0.19. We'll see. I can always return it since it was shipped via Prime.
 
As an Amazon Associate, MacRumors earns a commission from qualifying purchases made through links in this post.
Hi everyone!
I'm using the E-JOY 0.15mm on my 6S Plus temporarily till my Daswise gets here early next week.
The E-JOY is thin & good quality :)

IMG_6026.JPG
IMG_6033.JPG
 
Last edited:
Stamas88 said:
Had the spigen tr slim on since Tuesday and don't have the issues with the bottom of the screen coming loose

While it don't cover edge to edge it's pretty good especially for $8 bucks
Click to expand...


I got the Spigen too. It's fine so far and can't beat the price. Not sure why they don't make it so it covers all the way. It's not like they didn't have the exact dimensions of the screen. But not complaining since it was cheap.
 
hsnsky said:
Do you have a picture of this protector on your phone? I have purchased 5 of these for family members and all of them have an air bubble line on both edges of the screen. I had to return them all unfortunately.
Click to expand...
I would have to use someone else's phone to take a picture of it, I also put it on and took it off like at least 30 times and everything is perfect, I have a slight like air bubble in the top left corner because that's the corner that I lifted it up to to lift it up so many times

So did you buy it before it went out of stock or after? Maybe that's when they fixed the issue

Did your box say for iPhone 6s Plus and iPhone 6 Plus or did it just say for iPhone 6 Plus

When did you order?
 
db0227 said:
Just ordered this 2.5D Ice Core from Godosmith.

https://www.amazon.com/gp/aw/d/B010ALZJ9A/ref=ya_aw_od_pi?ie=UTF8&psc=1

The reason I went with 2.5D is because I wanted a slight gap to accommodate my Power Support Air Jacket. I also wanted something thinner than Daswise, which this is at 0.19. We'll see. I can always return it since it was shipped via Prime.
Click to expand...

Let us know how it is when you get it. I couldn't see spending the extra money (albeit not much more) over the daswise as at this point they are essentially the same thing (edge to edge with no curved sides).
 
As an Amazon Associate, MacRumors earns a commission from qualifying purchases made through links in this post.
Ordered the Ice Max 3D for my 6s Plus from Aliexpress. Can't wait!

Has anyone ordered for shipping to Australia? If so, how long did it take from order to delivery?
 
pcmike said:
Let us know how it is when you get it. I couldn't see spending the extra money (albeit not much more) over the daswise as at this point they are essentially the same thing (edge to edge with no curved sides).
Click to expand...

I'll report back. The extra $5 was worth it to me only because I want my SP to be as thin as possible. Not to mention everyone is raving about the quality of the Ice Max, so I thought I'd try one of Godosmith's other products.

Plus the first review on Amazon sealed the deal.
 
Stamas88 said:
I would have to use someone else's phone to take a picture of it, I also put it on and took it off like at least 30 times and everything is perfect, I have a slight like air bubble in the top left corner because that's the corner that I lifted it up to to lift it up so many times

So did you buy it before it went out of stock or after? Maybe that's when they fixed the issue

Did your box say for iPhone 6s Plus and iPhone 6 Plus or did it just say for iPhone 6 Plus

When did you order?
Click to expand...

I bought them last week and boxes all had iPhone 6s written on them.
 
I finally took the time to put my Ice Max 3D on my 6S Plus. There are bubbles on the edge that are very small. 2 mod size bubbles are just tot he right of midline.

Will these go away, or do I need to lift the edge and milk them out?

I had to do this with Imos. Just afraid of getting dust under it now.

So much hard work! Is it really worth it, I am thinking...


ARGGGGH! A speck of dust!!! I was soooo careful... :mad:
 
I had a chance to open my white daswise for my iPhone 6S that I bought a few days ago and the first thing I noticed is it has 2 circle cutouts above the ear speaker for sensors. Is it suppose to have 2? My phone only has 1 sensor, right center above the earpiece.
 
iAdamator said:
I had a chance to open my white daswise for my iPhone 6S that I bought a few days ago and the first thing I noticed is it has 2 circle cutouts above the ear speaker for sensors. Is it suppose to have 2? My phone only has 1 sensor, right center above the earpiece.
Click to expand...

There's 2 sensors there if you look closely: The ambient light sensor and the proximity sensor.
 
Installed a Godosmith Ice Max 3D a few days ago and just noticed that there's a speck of dust right in front of the proximity sensor. The adhesive on this thing is ridiculously strong. The screen protector will probably crack before that speck of dust can be removed.
 
I like the 3D covers, but there are very few of my cases that don't lift it up. Then a bubble appears and I can't get rid of it.

This is Ice Max. Cinder hasn't arrived yet,

Imos did not give me these problems.
 
pocketdoc said:
I like the 3D covers, but there are very few of my cases that don't lift it up. Then a bubble appears and I can't get rid of it.

This is Ice Max. Cinder hasn't arrived yet,

Imos did not give me these problems.
Click to expand...

Question for you:

Some users have reported the Ice Max being similiar if not identical to the Cinder. I know you cant make a direct comparison because you havent received the cinder yet, but how do you think the edge of the Ice Max hang on the side edges?

Does it hang on the side like a lot of the glass protectors do (prone to dust getting underneath the edges or does it actually contours to the curve of the glass ?

Thanks
 
Last edited:
6thDAY said:
Question for you:

Some users have reported the Ice Max being similiar if not identical to the Cinder. I know you cant make a direct comparison because you havent received the cinder yet, but how do you think the edge of the Ice Max hang on the side edges?

Does it hang on the side like a lot of the glass protectors do (prone to dust getting underneath the edges or does it actually contours to the curve of the glass ?

Thanks
Click to expand...

Not at all. Fits nicely. Just had problems with bubbles and cases. Just found my B-Noble and will try that next.
 
Not sure I will ever be satisfied.

Have B Noble to try, but it is thick like Imos. Comes with a Home Button ring. Don't like that.

Put another Tech Armour on. Easy to install. Center glass with attached surrounding curved white (plastic?) edge. Not bad. Some tiny bubbles at the edges. The white is a little bright, but can use some cases.

The curved glass SPs are nice, but installation is tricky. Going to try and "wash" one of my Ice 3Ds. Anyone done this?
 
pocketdoc said:
Not at all. Fits nicely. Just had problems with bubbles and cases. Just found my B-Noble and will try that next.
Click to expand...

Cases?

That scares me because I was planning on using my RhinoShield with the Ice Max on my 6s+, but now I'm concerned.

If Cinder 0.20mm is compatible with a lot of cases, I'm wondering why the 0.19mm Ice Max isn't?

Unless you tried a case that wasn't compatible with cinder to begin with?...if so, then it probably wont be compatible with the Ice Max because according to user reports, they both look identical.
 
You must log in or register to reply here.
Register on MacRumors! This sidebar will go away, and you'll see fewer ads.
Top Bottom
Back