Become a MacRumors Supporter for $50/year with no ads, ability to filter front page stories, and private forums.

Notorious96

macrumors newbie
Original poster
Jul 21, 2009
2
0
I have the black 16gig 3GS and I am using incase slider case. The case is brillliant but it does not allow for it to sit on the universal or iphone dock. The bottom slider needs to be pulled out for it to sit in the dock

Anyone know of

1. Any case that sits on the dock (universal/iphone) without having to remove the bottom
2. Any dock that allows the iphone with case to sit in it
3. A holder that works with the dock that allows for the phone to held upright on a desk

Thanks!
 
There are few cases that will fit in the actual dock. A skin will work but not much else.
However, there are cases where you can remove the bottom to dock.
 
Switch Easy cases come with a dock adapter that will fit a lot of phones with the case on. I used to own a Neo Touch on my old ipod Touch and it came with the dock adapter which now works perfectly with my iphone + incase slider in my iHome. Maybe try contacting them and see if you can just buy the dock adapter.
 
That looks promising. Do you know how long the cable is? Is it the extremely short Apple cable length or did they decide to make it a little longer like every other cell phone company does?

These do look really nice. I'd consider getting one of these if I knew that it would work with my Seidio Innocase.
 
Just ordered one after getting a prompt reply from the seller.

There are three sizes, for oversized cases, slim cases, and no case. Something for everyone.

How do you know if your case will actually fit though? If you tell them the specific case you have, do they tell you if it will fit?
 
What about using the speaker?

Can you utilise the 'Speaker' with docks usually? Doesn't look like you could benefit from the use of the 'Speaker' while the iPhone is placed in that particular dock though? (made2dock)
 
Can you utilise the 'Speaker' with docks usually? Doesn't look like you could benefit from the use of the 'Speaker' while the iPhone is placed in that particular dock though? (made2dock)

The griffin aircurve is a dock that allows you to use the inbuilt speaker, and even amplifies it.
 
made2dock docking station in case

What my brother "doneall" means by he has a friend who knows a guy, he means me. I am the one who makes these custom docking stations.

I am an engineer and the production manager for a manufacturing company. I developed it after I upgraded my 2G iPhone to the 3GS and wanted to dock it while in a case. But I couldn't find anything anywhere, so I made my own. And I figured there must be other people in the same situation.

The base is machined from solid aluminum and has a standard sync cable pressed inside. The cable is 36" long.

Your phone is guaranteed to fit. If it doesn't, I will give you a full refund. If your not sure which pocket size you need, you can tell me what case you have and I will make sure you get the correct fit. The standard slim has been tested on the ifrogz (as seen in the pics), Seidio Innocase, and Incase Slider Case. They all fit great.

And no, it doesn't really work well if you want to use the speakers. It doesn't dampen the volume much, but it will muffle the sound quality. If playing music while docked is important to you, you are probably better off with the Sendstation Dock Extender in conjunction with an Apple docking station.

I'm currently working on a black anodized model and one made from solid oak.

Dock-in-Case3.jpg

100_3592-2.jpg
 
What my brother "doneall" means by he has a friend who knows a guy, he means me. I am the one who makes these custom docking stations.

I am an engineer and the production manager for a manufacturing company. I developed it after I upgraded my 2G iPhone to the 3GS and wanted to dock it while in a case. But I couldn't find anything anywhere, so I made my own. And I figured there must be other people in the same situation.

The base is machined from solid aluminum and has a standard sync cable pressed inside. The cable is 36" long.

Your phone is guaranteed to fit. If it doesn't, I will give you a full refund. If your not sure which pocket size you need, you can tell me what case you have and I will make sure you get the correct fit. The standard slim has been tested on the ifrogz (as seen in the pics), Seidio Innocase, and Incase Slider Case. They all fit great.

And no, it doesn't really work well if you want to use the speakers. It doesn't dampen the volume much, but it will muffle the sound quality. If playing music while docked is important to you, you are probably better off with the Sendstation Dock Extender in conjunction with an Apple docking station.

I'm currently working on a black anodized model and one made from solid oak.

Looks nice. Great work! I don't know why other companies haven't thought about this yet. Now what was that 15% Mac Rumors discount you were talking about earlier again? ;)
 
What my brother "doneall" means by he has a friend who knows a guy, he means me. I am the one who makes these custom docking stations.

I am an engineer and the production manager for a manufacturing company. I developed it after I upgraded my 2G iPhone to the 3GS and wanted to dock it while in a case. But I couldn't find anything anywhere, so I made my own. And I figured there must be other people in the same situation.

The base is machined from solid aluminum and has a standard sync cable pressed inside. The cable is 36" long.

Your phone is guaranteed to fit. If it doesn't, I will give you a full refund. If your not sure which pocket size you need, you can tell me what case you have and I will make sure you get the correct fit. The standard slim has been tested on the ifrogz (as seen in the pics), Seidio Innocase, and Incase Slider Case. They all fit great.

And no, it doesn't really work well if you want to use the speakers. It doesn't dampen the volume much, but it will muffle the sound quality. If playing music while docked is important to you, you are probably better off with the Sendstation Dock Extender in conjunction with an Apple docking station.

I'm currently working on a black anodized model and one made from solid oak.

Received mine in Maine last night, will create a formal review of the dock in the next couple of days - stay tuned!

First impressions: very nice and well built!
 
I'm currently working on a black anodized model

I would be VERY interested in one of these. They look fan-friggen-tastic and the only reason I am not currently ordering one is that I would definitely prefer a black one.

Are these being made with a milling machine?
 
I would be VERY interested in one of these. They look fan-friggen-tastic and the only reason I am not currently ordering one is that I would definitely prefer a black one.

Are these being made with a milling machine?

From some of our correspondence:

" I make the docks on a $400,000 machine that can hold tolerances of 0.0001". It's a little bit of overkill for docking stations. "
:D
 
iPhone docking station update

I tried make a docking station out of oak yesterday. Didn't go so well. My machine is a little too strong. When it tried to grab the dock in the chuck, it shattered it into a hundred pieces. I guess we will be sticking to aluminum.

On a positive note, we will be sending a large batch of docking stations to our anodizing vendor today. So we should have the black ones on the website in about one more week.

And if you want a better idea of how they are made, there a some short video clips of the docks being machined on our website in the "about us" section.
 
Can you utilise the 'Speaker' with docks usually? Doesn't look like you could benefit from the use of the 'Speaker' while the iPhone is placed in that particular dock though? (made2dock)

i was going to ask the same thing. The dock looks very slick, but what about sound?
 
Register on MacRumors! This sidebar will go away, and you'll see fewer ads.