Become a MacRumors Supporter for $50/year with no ads, ability to filter front page stories, and private forums.
Status
The first post of this thread is a WikiPost and can be edited by anyone with the appropiate permissions. Your edits will be public.
why do you think so?
Because Apple released this Release Candidate labeling it as such and without a changelog. When they release it like this, Apple usually releases another Release Candidate with a changelog and without any indication that it's a beta version; it's as if it were already the final version released to the general user.
 
  • Like
Reactions: BigDO and simba4
I do like what it does. It was working fine and then suddenly stopped with 26.0.1 - which I’m really regretting picking up as it’s worse than 26.0
I like what it does too. I just don’t want it blocking websites when it has a bug. It was about once or twice a year for me which was enough for me to abandon it.
 
My 17 PM stutters while swiping between homescreens apps. Time has come for Apple to accept that poaching all those Android devs has caused iOS to have trashy and stuttery experience. Android has become far more smoother.
Can’t confirm. As always, give it a while to settle and do all the background indexing. From which version where you coming?
Then do a restart. Judge about the update in 1-2 days.
 
Has anyone messed with the WiFi 7 settings on 26.1? I find performance MUCH better when Wi-Fi 6E Mode is off. Hopefully I see an improvement on 26.1 from my 17 Pro Max with this feature turned on. I can be standing directly under my UniFi U7 Pro XGS with it turned on and get 1300Mbps with it turned off in same location 1850Mbps.
 
A bit smoother this morning but still feels unpolished with some hitches when scrolling and swiping.

In my Air, 26.0.1 was buttery smooth, this one is not.

Hoping we get a new RC2 or a new build for release. 🤞
 
  • Like
Reactions: mjs916
It‘s not only the widgetpage, it‘s every page with widgets on it which cause stuttering if switching from there.

Edit: At least on my iPhone 15 PM
I added more pages with widgets and sure enough the stutter appears for those pages. Not all off them.

I toggled Low Power Mode on to see how the clock widget was affected and oh boy the switching screens refresh rate is horrible all over.

Is the refresh rate stepping down drastically when changing pages involving widgets?
 
You couldn’t take a picture with your iPhone, but don’t you know how to take a screenshot with your computer? I can find you some support articles if you’d like.
At that point I was less concerned with googling which button takes pictures on a computer and more concerned with making sure my phone wasn’t ruined by this update
 
Yes, I always complete an encrypted backup and this will save most, however not all of my data. There will be considerable time and effort required in restoring and setting up again and so I still consider this a major, major issue. The update process should NEVER fail once it is initiated.


I use an OEM Apple lightning to USB-C cable (came out of one of the iPhone boxes) which is dedicated only for use with PC for Apple Devices device management. I also do not pick up or touch the iPhone/cable during any procedure.


Apple Devices is the current software that Apple developed and provides for such purposes however it is unstable and unpredictable. What procedure works fine one day may not work well the next. I use it because this is what Apple officially suggests and provides in 2025 for this exact purpose

Seriously, I don't know why you would use Apple Devices. Just go OTA.

You using a niche upgrade procedure shouldn't make you discourage everyone else from upgrading because you encountered one failure.
 
Found a bug with Reduced transparency turned on and folder animations
When opening and closing a folder there is a major slowdown in the animation.
 
My iPhone seems to be doing fine with the RC, however my iPad Air M1 still re-springs. I open Safari, browse a bit, and swipe up to go back to the Home Screen and all the icons disappear for a second and then come back. Will try re-installing the RC with the IPSW file and will update this post.

Update: installed the RC via IPSW and followed up by a hard restart, it still re-springs. Apple feedback submitted. Check it out:

 
Last edited:
Seriously, I don't know why you would use Apple Devices. Just go OTA.

You using a niche upgrade procedure shouldn't make you discourage everyone else from upgrading because you encountered one failure.
Niche upgrade procedure? OTA is a niche alternative upgrade procedure. OTA didn’t even exist when a standard wired upgrade was the only option. I used entirely official procedures, you don’t need to victim blame me for the sorry state of Apple’s software. This could only happen under the Cook administration.
 
  • Wow
Reactions: Macx69
Seriously, I don't know why you would use Apple Devices. Just go OTA.

You using a niche upgrade procedure shouldn't make you discourage everyone else from upgrading because you encountered one failure.

The IPSW method is considered to be more “thorough”, so it is used by geeks when things do not work smoothly after installing OTA. It does not always resolve the issue at hand, but gives it a good chance.

The OP’s issue with Apple Devices makes it a bit more complicated, as either Apple or Windows or both might be responsible for numerous glitches.
 
  • Like
Reactions: Macx69 and MrRom92
I’m so annoyed that the edge shimmer gets stuck again when it was fixed in the last beta. I don’t see them fixing it before final release. Maybe 26.1.1?

If you time it just right, you can tilt your phone and then just as the edge starts resetting itself (where it disappears) it will be stuck light that forever until you tilt your phone around again. It actually looks kinda cool without the edge on it

IMG_4965.png
 
Seriously, I don't know why you would use Apple Devices. Just go OTA.

You using a niche upgrade procedure shouldn't make you discourage everyone else from upgrading because you encountered one failure.
You must be a relatively new user. The wired IPSW installation method is considered to be the better way to install any kind of update, as it flashes the entire system from the scratch, eliminating any kind of odd bugs one maybe having. It is my go-to installation procedure, and has been since iOS 4.

OTA updates only became a thing from iOS 5 onward.
 
OTA updates only became a thing from iOS 5 onward.
...OTA is a niche alternative upgrade procedure....


Let's not act like OTA is some weird or niche way to update.
iOS 5 was 14 years ago, and I'd guess that 99.9% of people update via OTA.

Having said that, I always assume IPSW is the safest and cleanest way to update, although I moved to OTA years ago and have never had an issue (so far). Both ways should just work 😀
 
Let's not act like OTA is some weird or niche way to update.
I never said it was, but IPSW is the proper way to update an OS, and is by no means ‘niche’, as mentioned by the person before me.
Both ways should just work 😀
It should, especially the IPSW method, considering it is used when the phone has issues booting, but clearly something is wrong.
 
  • Love
Reactions: MrRom92
Given all the regressions with every beta, I'm wondering if Apple's main goal right now is just battery life and they're actively tweaking the OS to do things a bit slower or less performant in order to use less power and improve battery life.

In my Air, I still see occasional hitches when scrolling down the messages app, when scrolling in safari, when swiping on homepages. It feels like it's not really going at 120Hz Pro Motion but more like 60-90Hz instead with occasional moments of 120Hz. Just feels like it's struggling to be smooth. Didn't have these issues on 26.0.1.
 
I never said it was, but IPSW is the proper way to update an OS, and is by no means ‘niche’, as mentioned by the person before me.

It should, especially the IPSW method, considering it is used when the phone has issues booting, but clearly something is wrong.
You didn't, another poster did, I tried to quote another post and just do two quotes in one post 😀

I assume IPSWs are used a lot more internal at Apple as setting up OTA seems like a pain for testing
 
I never said it was, but IPSW is the proper way to update an OS, and is by no means ‘niche’, as mentioned by the person before me.

It should, especially the IPSW method, considering it is used when the phone has issues booting, but clearly something is wrong.
I’m going to disagree. For a developer, it is proper so they can test their app on a clean system. For everyone else, it’s not.
The OTA is the expected, proper way for the public to update their iOS.
 
Register on MacRumors! This sidebar will go away, and you'll see fewer ads.