Got a tip for us?
Let us know
Become a MacRumors Supporter for $50/year with no ads, ability to filter front page stories, and private forums.
- Status
How dies the back of the black hold up? Are the scratch or finger print issues?
I'm sweatier than the average person so my experience may not be yours - but yes the black is more of a fingerprint magnet than the ruby. As for scratches - no idea mate, only had the cases a day or two.
Unlike the Paragon and Pitaka MG, the Limitless and Gen 6 both have a small lip even in the lowest areas.
Last edited:
I think it would be very unlikely for the sides to make contact with any drop on a flat surface. My guess is that it would have to fall on a non-flat surface to make contact, in which case a lip wouldn’t likely matter.
I have no science to back that up. Just a guess, obviously.
I think you’re right. I just don’t understand what I perceive as a poor design. I suppose one must assume the reverse lip is done on purpose, but I think most would agree it’s a strange design choice for this type of case (full coverage, 50 grams, 15’ drop rated).
@Saladin12 they both would look great with their buttons swapped!
Red & black is a combo made in heaven!
Red & black is a combo made in heaven!
Let me know what you think of those please. I’ve always been fan but never took the plunge to try!
Good bye, Thinny Thin - Hello, FATTY FAT (83 Grams) 
Last edited:
Good bye Thinny Thin - Hello, FATTY FAT (83 Grams)
My hand started hurting just looking at those pictures lmao
Ready for the apocalypse. 🤯Good bye, Thinny Thin - Hello, FATTY FAT (83 Grams)
View attachment 2529220View attachment 2529221View attachment 2529222View attachment 2529223View attachment 2529224View attachment 2529225View attachment 2529226View attachment 2529227View attachment 2529228View attachment 2529229View attachment 2529230
Looks better than Sheath.Good bye, Thinny Thin - Hello, FATTY FAT (83 Grams)
View attachment 2529220View attachment 2529221View attachment 2529222View attachment 2529223View attachment 2529224View attachment 2529225View attachment 2529226View attachment 2529227View attachment 2529228View attachment 2529229View attachment 2529230
It looks indestructible!Good bye, Thinny Thin - Hello, FATTY FAT (83 Grams)
View attachment 2529220View attachment 2529221View attachment 2529222View attachment 2529223View attachment 2529224View attachment 2529225View attachment 2529226View attachment 2529227View attachment 2529228View attachment 2529229View attachment 2529230
What do you think of it? I have two ESR clear cases (one with Stash stand, one without). I really like the stash stand.
ESR cases seem to have the strongest MagSafe magnets. I found the camera control on both cases kind of herky-jerky, so they fell out of the rotation.
This case really reminds me of the Otterbox Commuter. I wonder if this might be the case I should have for travel/outdoor use, changing back to the Sheath when the phone is in less peril.
Yes, very similar to the Otterbox Commuter, feels way more robust than I remember the commuter being. This thing is one major TANK. The sides are pretty slippery if you are not grabbing it by the silicone areas. Magesafe is very strong and the button works just fine. I do have one concern with the inside of the CC button as it seems to have a couple sharp corners on the insides. Might do an exchange on Amazon.
I like that it has a charge port cover and mesh covers over the speaker/mic areas.
I believe the phone would survive a 30 foot drop in this case with no problems at all.
I'm convinced I need to have this case!
Ordered it in Navy Blue, direct from ESR, as I had a 20% off coupon from them, so it was $5 cheaper than Amazon. Most likely, they'll have this shipped from Amazon - they always have before.
I just put in for an exchange with Amazon over those sharp corners on the inside of the CC button.I'm convinced I need to have this case!
Please let me know if yours have the sharp corners when you receive it?
Just make sure you order the Cyber Edition with the CC button as they also make this case with the huge Otterbox cutout.
Press them in to pop out and install them pushing into place from inside.
iPhone 16 Pro Max ADVNTR Phone Case
Rugged iPhone case built for every activity. Shop for the iPhone 16 Pro Max with our Juggernaut ADVNTR phone case.
juggernautcase.com
I think this one might be a contender on heaviest 16PM case ever!
Oooh okay just done that. The red case with black buttons is nice but the black case with red buttons is FIRE. Will share pictures tomorrow as it's almost midnight here in the UK. Thanks for the idea buddy.