iPhone 17/Air/Pro/Pro Max Cases

[Lustral]

Ok my Bellroy Innovera case is here for my Air.

It's a bit slimmer and lighter than my Torro case and feels great as well. Buttons do stick out a bit mind and the camera control button seems to be working fine.

There is a tiny lip protection for the screen and just enough thickness for the camera bump as well.

Also the bottom of the phone covered slightly better than the Torro.

I'll give it a few days to see how I get on with it.

 

[Selcher]

Anyone recommend a case I can get off Amazon for the blue Pro Max? Love Caudabe but want a case ASAP.

Maybe a Torras Ostand Q3 Air in blue?

 

[walds11]

How’s the fit on the bottom? Unlike last year, where the bottom piece could have been tighter, this year it is too tight. It goes on, but not all the way, and even when using considerable force it leaves a gap that collects detritus. I only just noticed this yesterday and I’m a bit disappointed. Hopefully yours fits more precisely.

View attachment 2571220

The fit of my silver Arc Pulse on 17 pro is money! It’s definitely tighter than my 15 pro which is a good thing imo. That’s what she said 😂

 

[Zensō]

The fit of my silver Arc Pulse on 17 pro is money! It’s definitely tighter than my 15 pro which is a good thing imo. That’s what she said 😂

Does your bottom piece fit flush to the bottom of the phone with no air gap (on the bottom next to the speaker/mic, not the bottom sides)?

 

[walds11]

Does your bottom piece fit flush to the bottom of the phone with no air gap (on the bottom next to the speaker/mic, not the bottom sides)?

Yes.

 

[bobtamboo]

I really like the mous limitless case for my 17 pro in stone colour but its starting to pick up indigo dye from when I wear jeans. feel like it'll look horrible over time, only had it a couple of weeks.

 

[Zensō]

Third party case makers seem to be having all sorts of fit problems with the Air. Here’s what I’ve experienced so far:

Arc Pulse: bottom is too tight, doesn’t sit flush against the phone
Pitaka Ultra-Slim: Loose upper right corner, metal camera frame hits the glass plateau
Süti Phoneback: Top doesn’t lay flush against the phone, rattles
Andar Aspen: Bulge at camera control, USB cutout is off center

Only the Apple and Beats cases fit correctly. Frankly, I’m getting tired of these case lotteries and arguing with CS reps about their defective products (you’re not holding it right… lol). Perhaps I’ll just stick with the Apple cases this year and call it good.

 

[Sal09]

Touch Down.



Now the courier they are using for local
delivery are worse than Yun Express lol.

 

[Hooterville]

Anyone got the Nudient bold case?

Bold Case MagSafe - Mercury Green - iPhone 17 Pro Max

Bold Case, crafted with a unique iconic design and eco-conscious recycled plastics, stands as a symbol of refined taste. Its silicone grip and drop-proof construction provide protection while embodying the elegance of high-end design.

www.nudient.au

I purchased this case in the past and it basically sucked.

 

[Hooterville]

Touch Down.

View attachment 2571289

Now the courier they are using for local
delivery are worse than Yun Express lol.

Damn, you and Lizard really are tight

37 days later and no Paragon's for me

 

[kecinzer]

Third party case makers seem to be having all sorts of fit problems with the Air. Here’s what I’ve experienced so far:

Arc Pulse: bottom is too tight, doesn’t sit flush against the phone
Pitaka Ultra-Slim: Loose upper right corner, metal camera frame hits the glass plateau
Süti Phoneback: Top doesn’t lay flush against the phone, rattles
Andar Aspen: Bulge at camera control, USB cutout is off center

Only the Apple and Beats cases fit correctly. Frankly, I’m getting tired of these case lotteries and arguing with CS reps about their defective products (you’re not holding it right… lol). Perhaps I’ll just stick with the Apple cases this year and call it good.

Try to write to Arc support. They already sent me 2 replacements in past.
I'm very precious about case fitment, but bottom part of Arc Pulse fits OK for me.

 

[macher]

Try to write to Arc support. They already sent me 2 replacements in past.
I'm very precious about case fitment, but bottom part of Arc Pulse fits OK for me.

Just OK or could be better?

 

[kecinzer]

Just OK or could be better?

It could be better like on AlterEgo version that I had for 16PM, there was the best fit.
There are still little space between phone and bottom part, but you need to take a very closer look at it.
As from my experiences it can be due to wrong size of soft silicon part inside it.
Any extra dust don't bother me, because I always had many dust around any Arc Pulse 😄.

 

[Zensō]

It could be better like on AlterEgo version that I had for 16PM, there was the best fit.
There are still little space between phone and bottom part, but you need to take a very closer look at it.
As from my experiences it can be due to wrong size of soft silicon part inside it.
Any extra dust don't bother me, because I always had many dust around any Arc Pulse 😄.

The other related issue is that the bottom part starts creeping off the phone (just a little, it’s not falling off) after a couple of days. When this happened in the past it was due to the part being a little too loose. Now it seems it’s the opposite problem; I have to use considerable force to get it close to seating and that pressure seems to back the part off after a time.

 

[illmatic41]

Third party case makers seem to be having all sorts of fit problems with the Air. Here’s what I’ve experienced so far:

Arc Pulse: bottom is too tight, doesn’t sit flush against the phone
Pitaka Ultra-Slim: Loose upper right corner, metal camera frame hits the glass plateau
Süti Phoneback: Top doesn’t lay flush against the phone, rattles
Andar Aspen: Bulge at camera control, USB cutout is off center

Only the Apple and Beats cases fit correctly. Frankly, I’m getting tired of these case lotteries and arguing with CS reps about their defective products (you’re not holding it right… lol). Perhaps I’ll just stick with the Apple cases this year and call it good.

Have you tried any of the Benks cases yet? My favorite case is my AliExpress 1500d aramid case that I got for $16($31 now). I put back on my 2nd favorite case, the Apple Shadow one, but realized i got used to the thinness and grip of the aramid.

 

[titans1127]

Decided I'm going to return the Spigen Rugged Armor. It is much looser fitting than I'd like. Back to the Tech Woven for now.

 

[Zensō]

Have you tried any of the Benks cases yet? My favorite case is my AliExpress 1500d aramid case that I got for $16($31 now). I put back on my 2nd favorite case, the Apple Shadow one, but realized i got used to the thinness and grip of the aramid.

I haven’t. I’ve had so many QC issues with their cases in years past that I will now only buy them from Amazon for the easy returns. I may pass this year as I’m already getting return fatigue. We’ll see.

 

[LordArchie]

Thanks you just saved me AUD$105

I ordered the new Pitaka Glints of Gold in lucid blue though. Look forward to getting it.

View attachment 2571222

Credit to Pitaka for allowing us to see our actual phone colors in the case. Would love to see the same from Andar, Bellroy and Ryan London where we are picking based on color match

 

[AVBeatMan]

I think this case looks great, Cheap and quick delivery from Amazon

Spigen for iPhone 17 Pro Case, Ultra Hybrid T MagFit [Camera Control Button] [Compatible with Magsafe] - Matte Black

The clear choice. Compatible with iPhone 17 Pro, the Ultra Hybrid MagFit showcases your iPhone’s iconic design. Never let the minimalist dream end with daily protection that keeps you in the clear from drops and scratches. Snap-on MagSafe accessories easily with improved magnetic strength for ult...

www.amazon.com

I had it on an orange Pro Max and it looked great, I'd imagine the same on Blue with a black matte View attachment 2571145View attachment 2571146

Thanks. Ordered.

 

[Sal09]

Damn, you and Lizard really are tight

37 days later and no Paragon's for me

Shush.

Dont go jinxing our relationship.

 

[LordArchie]

Thanks. Ordered.

Would love your feedback when it arrives

 

[Lustral]

I wanted to try the Benks one for the iPhone air but the silver camera surround with the branding put me off to be honest. I’m gonna stick with this Bellroy one for now. Might have a look at the Andar one once they have revised their case with a better cut out for the usb c port.

 

[TechnicallyTee]

I wanted to try the Benks one for the iPhone air but the silver camera surround with the branding put me off to be honest. I’m gonna stick with this Bellroy one for now. Might have a look at the Andar one once they have revised their case with a better cut out for the usb c port.

If you can find a Benks, they aren’t restocking any of their Air cases. Unfortunate because they are solid.

 

[Lustral]

If you can find a Benks, they aren’t restocking any of their Air cases. Unfortunate because they are solid.

There were available direct a few weeks ago. I do fancy one for my iPad Pro tbh but at £70 it’s a bit pricey.

 

[Star-fire]

Have an apple silicone for my 17PM but it picks up every bit of lint from my pocket, I like it otherwise.

I'd like to get the Torras Q3 air but $65 for a case is getting pricey. I had won $10 at best buy on McD Monopoly and they had the silicone cases on sale.