PB to GM

Discussion in 'iOS 9' started by lrsone, Sep 10, 2015.

  1. lrsone macrumors 6502

    Joined:
    Jul 12, 2012
    #1
    So is anyone else on GM and being asked to installed PB3? This is annoying how do you get rid of the notification and get rid of PB3 as an update. I installed the GM while I had the PB profile installed. I uninstalled it after and hard reset but still no luck of getting rid of it. Has anyone tried backing up while on iOS 9 and then reinstalling iOS 9 from the back up? Will it still show PB3 as an update?
    image.png image.png
     
  2. lagwagon Suspended

    lagwagon

    Joined:
    Oct 12, 2014
    Location:
    Calgary, Alberta, Canada
    #2
    Go into Settings > General > Storage & iCloud Usage. Storage > Manage Storage and delete the PB 3 download/install file. (Judging by your screenshot it's been fully downloaded because it only shows install as the button)

    Once it's deleted, then go and delete the profile that was required for public beta that's found near the bottom of the General list. Then reboot the phone (home + power.) That should take care of it and worked for me.
     
  3. ohsnap macrumors regular

    Joined:
    Aug 5, 2004
    #3
    I'm getting that too and deleting the profile/rebooting wouldn't work. This is happening, of course, because we're going from PB to GM. I wonder, now that you're on the GM, if you made a backup in iTunes with the removed profile settings, then did another restore, would that remove the problem since the profile gets copied over from the backup.
     
  4. lagwagon, Sep 10, 2015
    Last edited: Sep 10, 2015

    lagwagon Suspended

    lagwagon

    Joined:
    Oct 12, 2014
    Location:
    Calgary, Alberta, Canada
    #4
    I went from PB 3 to GM. I updated with a ipsw file I downloaded off torrent. And option + clicked update in iTunes and selected the file. Didn't need to restore from anything, it was a straight upgrade.
     
  5. dsh3 macrumors 6502

    dsh3

    Joined:
    Apr 30, 2012
    Location:
    Denmark
    #5
    I ran PB3, deleted the beta profile, restored from IPSW and loaded backup on to the phone. And I have the notification in Sertings too, yet no way to delete any temporary beta files as lagwagon describes?
     

    Attached Files:

  6. dsh3 macrumors 6502

    dsh3

    Joined:
    Apr 30, 2012
    Location:
    Denmark
    #6
    FWIW, here are two more screenshots of Settings with a notification and one from when it's opened.
     

    Attached Files:

  7. MisterDisney macrumors 6502a

    Joined:
    Jun 20, 2010
    #7
    I ended up letting PB3 download and install, then removed the profile and used the ipsw to update again (with iTunes).
     
  8. gforce216 macrumors 6502a

    Joined:
    Jun 17, 2009
    #8
    I deleted the PB3 and Profile after I updated via iTunes to iOS 9 GM. Then I did an iCloud backup and then did the Restore method to iOS 9 GM in iTunes. Restored from my iCloud backup and it fixed it. Also seemed to really help my iPhone and iPad overall.
     
  9. ohsnap macrumors regular

    Joined:
    Aug 5, 2004
    #9
    You've said that before. Saying it again is not helpful.
     
  10. xero9 macrumors 6502a

    Joined:
    Nov 7, 2006
    #10
    Well at least I was able to delete the fully downloaded "update", but the badge is still on my Settings icon after following these steps. *sigh*
     
  11. edulinka macrumors member

    Joined:
    Oct 22, 2012
    #11
    So how to get GM for non developer if I have no message for download GM. I still have beta profile on my phone. Should I delete it? Is any one non developer updated to GM? How?
    Thanks
     
  12. gsmornot macrumors 68030

    gsmornot

    Joined:
    Sep 29, 2014
    #12
    I no longer have the beta profile. I updated by finding the IPSW file via torrent and downloaded it. Installed via iTunes.
     
  13. edulinka macrumors member

    Joined:
    Oct 22, 2012
    #13
    So you deleted profile and installed with IPSW?
     
  14. GreyOS macrumors 68030

    GreyOS

    Joined:
    Apr 12, 2012
    #14
    Either download it from a torrent site or just wait till the 16th and get the public OTA.
     
  15. RewAU, Sep 10, 2015
    Last edited: Sep 10, 2015

    RewAU macrumors newbie

    RewAU

    Joined:
    Aug 7, 2015
    Location:
    Melbourne, Australia
    #15
    The GM which people are installing from a torrent has a build number that is earlier than PB3, which would explain the behaviour being described..
     
  16. lrsone thread starter macrumors 6502

    Joined:
    Jul 12, 2012
    #16
    This caused no issues?
     
  17. gsmornot macrumors 68030

    gsmornot

    Joined:
    Sep 29, 2014
    #17
    That is correct.
     
  18. edulinka macrumors member

    Joined:
    Oct 22, 2012
    #18
    I did install iPhone7,1_9.0_13A340_Restore.ipsw for 6+ and now it says update to public beta 3
     
  19. gsmornot macrumors 68030

    gsmornot

    Joined:
    Sep 29, 2014
    #19
    Do you still have the beta profile installed? Do you have the PB 3 file downloaded on your device? If yes, delete the PB 3 file and remove the profile.
     
  20. edulinka, Sep 10, 2015
    Last edited: Sep 10, 2015

    edulinka macrumors member

    Joined:
    Oct 22, 2012
    #20
    If I do this I will be able to do upgrade to GM? Or message about PB3 dissapear?
    Or iPhone7,1_9.0_13A340_Restore.ipsw is GM
     
  21. lrsone thread starter macrumors 6502

    Joined:
    Jul 12, 2012
    #21
    So I installed PB3 again when prompted. Deleted the Profile with PB3 installed. Shift Key update the GM and everything seems to be better. Says I'm up to date, doesn't prompt me to download and install PB3. And it doesn't show I have a pending update via notifications.
     
  22. dsh3 macrumors 6502

    dsh3

    Joined:
    Apr 30, 2012
    Location:
    Denmark
    #22
    Hmm, that's weird. I did a shift+restore and loaded the backup afterwards, and I just can't get rid of the notification now. Sigh.
     
  23. bripab007 macrumors 6502

    Joined:
    Oct 12, 2009
    #23
    Did you reboot the phone AFTER deleting the profile and BEFORE doing the GM update via iTunes?
     
  24. RichardC300 macrumors 65816

    RichardC300

    Joined:
    Sep 27, 2012
    Location:
    Chapel Hill, NC
    #24
    I installed the GM, saw that there was a PB 3 update available, deleted the PB profile, "updated" to PB 3, then installed the GM again.
     
  25. themikea macrumors regular

    themikea

    Joined:
    Aug 15, 2014
    Location:
    Toronto, ON
    #25
    Did you still have the beta profile still installed when you loaded the GM? I did. I have the stuck notification also. I was thinking of doing another backup and restore of the GM now that I have deleted the beta profile.
     

Share This Page