Sidebar Sidebar
Become a MacRumors Supporter for $50/year with no ads, ability to filter front page stories, and private forums.

PowerSupport iPhone 6 & Plus cases

PowerSupport iPhone 6 & Plus cases

Yea I followed all the hype here too Jknet. Mine was junk. They did replace if, with force version and I had had a non force version. Wasn't even worth the hassle. Have several other cases of much better quality I paid a more fair price for. Mine creaked and phone shook inside etc etc. Overall wasn't happy either.
 
tsturbo said:
Narrowed it down to either the PSAJ or Apple leather case, Apple leather case won me over, think about it....hard plastic or leather? Leather all the way, much nicer feel in the hand IMO
Click to expand...
I dislike that the bottom isn't covered on the Apple version.
 
Looks like the 6 Air Jacket does NOT fit the 6S that well. Very tight and the speaker holes don't line up well leading to muffled sound.

If you want a Power Support Air Jacket for your new S, wait for the redesign, which I believe will be coming.
 
NewYorkRanger said:
Looks like the 6 Air Jacket does NOT fit the 6S that well. Very tight and the speaker holes don't line up well leading to muffled sound.

If you want a Power Support Air Jacket for your new S, wait for the redesign, which I believe will be coming.
Click to expand...

I have a power support case on my iPhone 6s plus and holes line up perfectly.
 
  • Like
Reactions: johnnyapples33d
Bako-MacAddict said:
I have a power support case on my iPhone 6s plus and holes line up perfectly.
Click to expand...

is yours the air jacket sold directly from power support? they just released an email saying that their cases are compatible withe the 6s. for the force case thats sold in apple stores though, that one might not fit as well since the lip is higher
 
whathedunk said:
is yours the air jacket sold directly from power support? they just released an email saying that their cases are compatible withe the 6s. for the force case thats sold in apple stores though, that one might not fit as well since the lip is higher
Click to expand...

Oh I see ! Yeah , mine it's from the website.
 
Just installed a spare iPhone 6 PS anti glare protector on my iPhone 6S and am happy to report what appears to be a perfect fit.
 
  • Like
Reactions: WJKramer
Bako-MacAddict said:
Oh I see ! Yeah , mine it's from the website.
Click to expand...

so i just received my air jacket direct from power support's website. the 6s plus fits this case better than the force version from the apple store. unfortunately the speaker cutouts are slightly covered as well as the mic. other than that the case fits fine, no lip protection with the non force version. i have a tempered glass on my phone and that is the only thing that touches the table if laying face down
 
NewYorkRanger said:
Looks like the 6 Air Jacket does NOT fit the 6S that well. Very tight and the speaker holes don't line up well leading to muffled sound.

If you want a Power Support Air Jacket for your new S, wait for the redesign, which I believe will be coming.
Click to expand...

Bako-MacAddict said:
I have a power support case on my iPhone 6s plus and holes line up perfectly.
Click to expand...

whathedunk said:
so i just received my air jacket direct from power support's website. the 6s plus fits this case better than the force version from the apple store. unfortunately the speaker cutouts are slightly covered as well as the mic. other than that the case fits fine, no lip protection with the non force version. i have a tempered glass on my phone and that is the only thing that touches the table if laying face down
Click to expand...

Could someone share a few pictures? Seems to be conflicting reports. I can't believe Power Support would stand by their current Air Jackets if they don't fit properly. I always came back to the rubber black version for my SG 6+ so I would love to pick one up for my 6s+. Obviously not if the cut isn't right though.
 
I got my black rubber air jacket case today and installed it. Everything lines up perfectly. It basically adds no size or bulk to the phone at all. Im really happy with it. I have the 6s Plus if that helps anyone.
 
  • Like
Reactions: db0227
MacBreezy said:
I got my black rubber air jacket case today and installed it. Everything lines up perfectly. It basically adds no size or bulk to the phone at all. Im really happy with it. I have the 6s Plus if that helps anyone.
Click to expand...

That definitely helps. Did you buy it from the Power Support website?

I'm trying to figure out why people are coming out with conflicting reports. Maybe some bought from Amazon or Apple Store?
 
whathedunk said:
so i just received my air jacket direct from power support's website. the 6s plus fits this case better than the force version from the apple store. unfortunately the speaker cutouts are slightly covered as well as the mic. other than that the case fits fine, no lip protection with the non force version. i have a tempered glass on my phone and that is the only thing that touches the table if laying face down
Click to expand...
db0227 said:
Could someone share a few pictures? Seems to be conflicting reports. I can't believe Power Support would stand by their current Air Jackets if they don't fit properly. I always came back to the rubber black version for my SG 6+ so I would love to pick one up for my 6s+. Obviously not if the cut isn't right though.
Click to expand...
When I get home I'll take some pictures. i previously ordered mine from their website for my regular 6 plus. Fits good on my 6s plus.
 
db0227 said:
That definitely helps. Did you buy it from the Power Support website?

I'm trying to figure out why people are coming out with conflicting reports. Maybe some bought from Amazon or Apple Store?
Click to expand...

I ordered mine directly from Power Support. Here are some pics. Apologies for the lighting, I just snapped a couple real quick.
 

Attachments

  • image.jpeg
    image.jpeg
    1.4 MB · Views: 334
  • image.jpeg
    image.jpeg
    1.4 MB · Views: 325
  • image.jpeg
    image.jpeg
    1.4 MB · Views: 303
  • image.jpeg
    image.jpeg
    1.3 MB · Views: 339
  • Like
Reactions: db0227
MacBreezy said:
I ordered mine directly from Power Support. Here are some pics. Apologies for the lighting, I just snapped a couple real quick.
Click to expand...

Awesome. Thanks. Wonder why some people are having issues?

Also, mind holding the phone at an angle and snapping a close-up shot of the speaker holes?
 
MacBreezy said:
I tried and you can't really tell anything from the pic. Mine line up perfectly so you can't see any of the bezel.
Click to expand...

Bako-MacAddict said:
Yep ! The black one.
Click to expand...

Thanks for trying and clarifying. I sent an email to Power Support saying I have seen multiple claims of misaligned cutouts. I'll report back if and when I get a reply. Completely mystified as to why there would be differences in the Air Jackets shipped direct from Power Support.

Here's a link to the other thread where I saw someone with misaligned cutouts. Looks like she got the case from Amazon, which would make sense, except whatthedunk said he ordered direct from Power Support.

https://forums.macrumors.com/thread...reat-clear-cases.1921896/page-2#post-21995063

¯\_(ツ)_/¯
 
I bought my Power Support Air Jacket for 6S Smoke Japan version from Amazon, and it came with one AFP film. I have been using air jacket since 3GS, 4S, and 5S, and I'm always satisfied with the quality. However this 6S one, when I hold it, I can feel the edge especially around the cutout at power button, volume up/down, mute button, and bottom are kinda sharp. And it makes me feel uncomfortable.

Does anyone feel it the same way? Or is it possible I got a counterfeit one?

IMG_5122s.jpg

IMG_5123s.jpg
 
Last edited:
Power support has not gotten back to me for multiple emails through their site. Anyone successfully able to contact them and how
 
Looking back to last years posts a lot of you had trouble removing the case. And ALOT of dust problems. Is this trouble for both the force and regular version or only the force?
 
trevorplease said:
Looking back to last years posts a lot of you had trouble removing the case. And ALOT of dust problems. Is this trouble for both the force and regular version or only the force?
Click to expand...

I had the regular rubber black version on my SG 6 Plus, so dust was a non issue for me. It's definitely tricky to remove at first, but you do get the hang of it. PS also has a pretty helpful video.

The Force version, on the other hand, was especially hard to remove. I would definitely recommend the regular version direct from Power Support.
 
You must log in or register to reply here.
Register on MacRumors! This sidebar will go away, and you'll see fewer ads.
Top Bottom
Back