Become a MacRumors Supporter for $50/year with no ads, ability to filter front page stories, and private forums.
You said, you have a 130GB HDD. I guess you are referring to what you see in the OS. What did the label on the HDD itself say?
Also, what brand was the 80GB and what the +128GB Drive? (I have the feeling/experience that for some strange reason 160GB Seagate IDE drives cause problems, while 160GB drives by WD work. Of course, in both cases only 128GB will be seen. I know, though this might be an unfair generalisation.)

I recall getting a new 200GB Seagate PATA 3.5 HD to work in a slot load without partitioning, (same with a G4 Cube) but in the end neither one were stable.

A friend of mine with a Sawtooth got a new close out on a couple of 120 Seagates, it was quite a steal for Macs with the 128gb limit.
 
I recall getting a new 200GB Seagate PATA 3.5 HD to work in a slot load without partitioning, (same with a G4 Cube) but in the end neither one were stable.

A friend of mine with a Sawtooth got a new close out on a couple of 120 Seagates, it was quite a steal for Macs with the 128gb limit.

Large drive will work fine in a Cube running Leopard or Tiger once LBA-48 support has been enabled via OpenFirmware. OS 9 and 10.0-10.3 will work as long as they are in the partition that is within the first 128GB. They can be installed if they have a large drive driver installed. G3 Macs completely lack support for LBA-48, as do Sawtooths. Gigabit Ethernet, Digital Audio, and early Quicksilvers have support for it, but it isn't enabled.
 
Here is an old friend that will allow use for drives over 128GB on older G3 and G4 machines.
Wasn't there a freeware linked to in an article over at lowendmac.com?


Edit: on OS 9 - Apple specified a 200GB max partition size being able to use by OS9 for Macs, that naturally support LBA-48, does that count after the Openfirmware-hack, too?

Also, if someone doesn't use the hack and wants to be sure that he gets one of the Quicksilvers that support over 128GB (some do, some not), I found a useful info some time ago in the "OS 9 lives forums". It is the logicboard number, to watch out for.

Power Mac G4 QuickSilver 733, 800, Dual 800, 867, 933, and Dual 1 GHz with logic board 820-1342-B (QS logic board 820-1276-A will NOT work and peak out at 128 GB).

Source: http://www.macos9lives.com/mac os 9 lives_003.htm
 
Last edited:
On OS 9 - Apple specified a 200GB max partition size being able to use by OS9 for Macs, that naturally support LBA-48, does that count after the Openfirmware-hack, too?

I've honestly never tried it. I've always stuck to less than 120GB partitions with OS 9. The larger partition sizes may be causing some of the instability as noted by California.
 
Register on MacRumors! This sidebar will go away, and you'll see fewer ads.