Become a MacRumors Supporter for $50/year with no ads, ability to filter front page stories, and private forums.
Man, they really have to get a handle on periscope lenses and eliminate the bump. It's getting out of hand. I just measured and on the iPhone 14 Pro it's a full 2.5 mm extra depth. You'd think given their obsession with design that the periscopes would be a very high priority internally.
 
  • Like
Reactions: compwiz1202
Thinner bezels AND USB-C? Wow. They will sell thousands. Tens of thousands. To every internet dork who has this on their radar.
 
That's why I think the iPhone 15 models may be thicker than people think. Modern stainless steel and titanium alloys may allow this to happen. A thicker phone would better accommodate the periscope camera and would also allow the introduction of vapor chamber cooling for the A16 or A17 SoC itself.
From rough measurements of these render pictures, the phone body seems around 8.4 to 8.5mm thick, which will make the 15 pro the thickest iPhone since the 5c in 2013.
I get that top left is the default iPhone camera placement but ever since iPhone 11 the phone started to become really unbalanced. Bigger cameras are current state of tech, it's fine I guess, but can't it be better looking...?

Edit; okay messing around with the layout reveals that changing anything will look out of place immediately. Apple you'll have to figure it out yourself :). Some sort of horizontal iPhone X pill shape doesn't seem too bad to me though;

View attachment 2160191
Do not forget than components like cameras do take space inside the body. Your proposal is not compatible with faceID HW.
 
  • Like
Reactions: Makisupa Policeman
If the camera is actually going to be THAT thick... I think I might just want the phone a tad thicker (and increase battery life) so that the phone isn't so top HEAVY or wobbling all over my desk when I tap it. Even a phone case won't make that bump flush....
You and the six other people in the entire world that actually use the phone without a case. The rest of the entire iPhone market will not care at all.
 
I wish they could figure out a way to make the camera flush with the body of the phone like the original—iPhone 6 era had. I understand that would be difficult with all of the technology that’s packed into modern phone cameras, but I’d even trade some thinness or weight for the phone to be more like those older models again.
 
Make the phone as thick as the camera bump. Flush back #BringSexyBack. What to do will all of that extra thickness? Well based on that camera thickness, they could almost double the battery life… whoever is in charge of the camera module just needs to be fired. Johnny Ive would have never let it get THIS bad. Aesthetically atrocious. iPhone 12 Pro was the best camera bump (after the 5 of course)
 
Isn't the point of the ring around the lenses to protect the edges? It doesn't make sense to me that the lenses would stick out further than the corresponding rings.

Or is the ring just to hold the lens in place? That seems....unlikely.
 
They'll never get another nickel out of me for an iPhone if they never make any more Minis

These huge patio paver bricks with camera tumors on them are totally unappealing to me.

iPhone design needs a shakeup, a re-think and some new ideas brought into the lineup

I agree, but there’s no one left at Apple to do it.
 
They'll never get another nickel out of me for an iPhone if they never make any more Minis

These huge patio paver bricks with camera tumors on them are totally unappealing to me.

iPhone design needs a shakeup, a re-think and some new ideas brought into the lineup
It's like you sucked the thoughts out of my brain and wrote them on the page. Thank you!
 
  • Love
Reactions: turbineseaplane
The camera bump is out of control! Hopefully it improves for the 16 (when I will consider upgrading from the 13) but I doubt it, every year it gets more obscene.

At this point, I'd rather they just build a thicker, more rugged iPhone that didn't require a case for protection and with no camera bump. Make it waterproof, shockproof, dust proof, etc.
 
The iPhone has too many models!

Also, Apple, please release a model with this exact mix of features that I want, never mind that there’s virtually no market for it.
 
I couldn't care less for thinner bezels.
But the camera bump is absolutely hideous.

On the other hand, it will allow for the iPhone cases with enough space to store your credit cards, cash money, car keys, afternoon sandwich AND most of your sports gear. All in one phone case!

Bring it on, Apple! :p
 
  • Like
Reactions: platinumaqua
Register on MacRumors! This sidebar will go away, and you'll see fewer ads.