Become a MacRumors Supporter for $50/year with no ads, ability to filter front page stories, and private forums.
Ok, got my new white iPhone 4S activated and have since applied a screen protector and the SGP Linear EX (same Infinity White). Not going to bother to take pics since it looks identical to the OP's. However, I am going to install the matte Phantom Skinz back tonight and will take pics when that is done.
 
Ok, got my new white iPhone 4S activated and have since applied a screen protector and the SGP Linear EX (same Infinity White). Not going to bother to take pics since it looks identical to the OP's. However, I am going to install the matte Phantom Skinz back tonight and will take pics when that is done.

Sweet! Take the pics and either post em in here or post a link in here to your thread or pic. Interested in seeing it.
 
Which one? White or black?

White

----------

Ok, got my new white iPhone 4S activated and have since applied a screen protector and the SGP Linear EX (same Infinity White). Not going to bother to take pics since it looks identical to the OP's. However, I am going to install the matte Phantom Skinz back tonight and will take pics when that is done.

yea i definitely want to see the phantom skinz back too!
 
Can you post some pics of the case on the black iPhone?

Ok so here they are. Overall, I loved this case, I just didn't like it on the white iPhone. I like it on the black. It surrounds the edges like we all were previously talking about and the back is a harder rubber and the sides are a hard rubber but just bendable enough to install it and it still after 2 years has fit snug around the phone.

I notice that there is never really much mention to iSkin and their products. I personally have had a few of their cases since iPhone and have been happy. Definitely a company to check out.

www.iskin.com

08404a2a.jpg

a959b428.jpg

b35338e9.jpg

bc43a4fa.jpg

dacd943a.jpg

88220de8.jpg
 
Ok so here they are. Overall, I loved this case, I just didn't like it on the white iPhone. I like it on the black. It surrounds the edges like we all were previously talking about and the back is a harder rubber and the sides are a hard rubber but just bendable enough to install it and it still after 2 years has fit snug around the phone.

I notice that there is never really much mention to iSkin and their products. I personally have had a few of their cases since iPhone and have been happy. Definitely a company to check out.

www.iskin.com

Thanks for taking the time & effort to take & share those photos. I really appreciate it.

Do you mind putting this iSkin case on your white iPhone & taking some photos for us? Thanks in advance. :)
 
Thanks for taking the time & effort to take & share those photos. I really appreciate it.

Do you mind putting this iSkin case on your white iPhone & taking some photos for us? Thanks in advance. :)


No prob! Here's the white 4S in the iSkin Claro. Enjoy!

And after looking at the pics, check out the two iSkin links to three different cases I've posted. One of which is the Claro.

Claro: http://www.iskin.com/iphone4/

Revo: http://www.iskin.com/iphone4/revo/#gallery

Aura: http://www.iskin.com/iphone4/revo/#gallery

If anyone looks at em, please come back here and comment on them!

280a90ee.jpg

0a910e05.jpg

b56ae4e4.jpg

472ab6b6.jpg
 
Thanks again for taking & sharing the pictures.

IMHO, that case looks fantastic on a white iPhone 4S! :)

Really think so? I guess it's just cause I've had it for 2 years and needed a change of scenery lol.

Also, when it comes from iSkin, it's ALOT clearer than what you see in the photos. It's just the age of it starting to yellow. It's been in smoke free house, just normal wear I guess. I still like it though. Been my favorite case to date, besides this Linear EX now lol.

But I've dropped it many times and never seen a crack, loose parts or hiccups in software. To be honest, if your in the market for a slim all device fitting case, the Claro is the way to go. I give it 9.5/10
 
Sweet! Take the pics and either post em in here or post a link in here to your thread or pic. Interested in seeing it.

Just got down applying the phantomskinz to the back and sides, and I am really pleased. I have installed about a dozen of these type skins and the iPhone was hands down the easiest install due to all the flat surfaces.

I'm letting it dry right now, but I will probably takes some pics later tonight or tomorrow.
 
SGP Linear EX Color Series (Infinity White) & Phantom Skinz Matte back

Ok... There was some good news and some bad news. The bad news is that the case would not fit over the Phantom Skinz matte sides, so I had to remove them (no biggie). The good news is that I think it looks fantastic (pics attached)!
 

Attachments

  • iPhoneSetup1a.jpg
    iPhoneSetup1a.jpg
    122 KB · Views: 171
  • iPhoneSetup1b.jpg
    iPhoneSetup1b.jpg
    107.5 KB · Views: 190
  • iPhoneSetup1c.jpg
    iPhoneSetup1c.jpg
    109.5 KB · Views: 269
  • iPhoneSetup1d.jpg
    iPhoneSetup1d.jpg
    100.1 KB · Views: 191
Do you know if this case would be able to fit a back plate from a different brand say Trunket??? It almost looks like any back piece you put on will be thicker than the edge of the phone case.
 
Indecisive

White on white looks great! It almost looks like it's part of the phone and not a bumper.

I'm about to order this but I can't make up my mind whether to get the black one or the silver one for my Black iPhone 4.
If anyone has pictures of this bumper on a black iPhone, I would greatly appreciate it!
 
I've had this case for a few days and thought I loved it. The biggest problem I have is how glossy and slippery the phone feels with this bumper. I have better grip without this case.
 
Last edited:
I love this bumper so much! It is perfect for me! It was a little slippery at first but I have gotten used to it and it isn't a problem now. It is a glossy case so there will be some slip to it. Maybe they will come out with a matter version for those that want more grip.
 
Last edited:
I live this bumper so much! It is perfect for me! It was a little slippery at first but I have gotten used to it and it isn't a problem now. It is a glossy case so there will be some slip Tobit. Maybe they will come out with a matter version for those that want more grip.

This case would be perfect in a matte finish.

----------

Could you post pictures, please?

I'd like too, but the only camera I have is the one on my iPhone4.:eek:
 
LOL but I want to add that this case actually fit so well it looks and feels like it is actually a part of the phone. It's just so darn sexy in the all white ha ha. :p

Bleh iphonechick do I have to buy one now?!


----------

I agree, I would never buy it in matte because of the possible discoloration and the peeling of the soft touch that is bound to happen over time. Like I said it is perfect the way it is but some may still want that matte.

this case would NOT be perfect if it was matte because it would discolor

matte/soft touch/frost=discolor

glossy polycarbonate=no discolor

it's that simple
 
I just got this case today.. love it!! I've cycled through many cases and I've finally found something to stick to.
 
AlPlPlLE, or anyone who has this case, is the power button loose on yours? I noticed on mine that if I shake the phone it rattles. The volume buttons are stuck in place though.
 
AlPlPlLE, or anyone who has this case, is the power button loose on yours? I noticed on mine that if I shake the phone it rattles. The volume buttons are stuck in place though.

Yup my power button rattles a bit

Yup power button rattles a little bit. But as you mentioned imalazeeass, it's only if I shake it it rattles. Doesn't bug me...yet lol. :p

Glad you like it though! Yea I've cycled through some others and debated for awhile and haven't regreted buying this case one time since I've purchased.
 
Register on MacRumors! This sidebar will go away, and you'll see fewer ads.