Start Posting Pics Of Cases With iPhone 6's In Them Already
- Thread starter boltjames
- Start date
- Sort by reaction score
atticus18244fsa
macrumors 6502
Gold iPhone 6 in Apple White Silicon case
Itsedstech
macrumors 68000
do you have a link from where you ordered from? the .6 version, i want one!
NameUndecided
macrumors 6502a
I took a chance with a designed case from zazzle.com
http://www.zazzle.com/driveindustries/gifts?cg=196493548897506451
^ This is not a promoted link. Just the designs that I was personally choosing from.
It's just a Case-Mate tough case with a design printed on it. I had no experience with Case-Mate or zazzle so it was sort of a blind dive.
I think aesthetically it really matches or exceeds my expectations. The design it a little darker and redder shade of "wood" than shown on the website, but I'm fine with it.
My only problem though is that I have no idea how I am going to get this case off. The plastic hard shell is not too flexible at all, and it was a minor struggle and puzzle in getting it in.
Also on the bottom on the back there's a very small gap between the hard case an the rubber protection. The case is basically two pieces -- the rubber "bumper" type piece that goes around the sides and the hard plastic case.
But it looks pretty and I'm happy! If anyone has a case-mate tough case and knows of a trick to remove it, please do feel free to quote me or PM me.
Edit - some additional comments: The smooth hard case might not suffice for anyone who's too put off by how "slippery" the bare phone may already feel. And it could be seen as a bit of a smudge magnet, not unlike the front of the phone.
And I was able to take the case off! It took about ten minutes of careful-paranoid prying at the bottom corners, starting from the middle.
So... I'm still happy with it as a case that I'm not planning to take on and off all the time.
Edit again, a couple days later -- It took a couple rounds of practice getting it on and off. I start at a bottom corner and get it to pop out, then move to the other bottom corner. Now it only takes about one minutes instead of… ten.
http://www.zazzle.com/driveindustries/gifts?cg=196493548897506451
^ This is not a promoted link. Just the designs that I was personally choosing from.
It's just a Case-Mate tough case with a design printed on it. I had no experience with Case-Mate or zazzle so it was sort of a blind dive.
I think aesthetically it really matches or exceeds my expectations. The design it a little darker and redder shade of "wood" than shown on the website, but I'm fine with it.
My only problem though is that I have no idea how I am going to get this case off. The plastic hard shell is not too flexible at all, and it was a minor struggle and puzzle in getting it in.
Also on the bottom on the back there's a very small gap between the hard case an the rubber protection. The case is basically two pieces -- the rubber "bumper" type piece that goes around the sides and the hard plastic case.
But it looks pretty and I'm happy! If anyone has a case-mate tough case and knows of a trick to remove it, please do feel free to quote me or PM me.
Edit - some additional comments: The smooth hard case might not suffice for anyone who's too put off by how "slippery" the bare phone may already feel. And it could be seen as a bit of a smudge magnet, not unlike the front of the phone.
And I was able to take the case off! It took about ten minutes of careful-paranoid prying at the bottom corners, starting from the middle.
So... I'm still happy with it as a case that I'm not planning to take on and off all the time.
Edit again, a couple days later -- It took a couple rounds of practice getting it on and off. I start at a bottom corner and get it to pop out, then move to the other bottom corner. Now it only takes about one minutes instead of… ten.
Attachments
Last edited:
Here's the LAUT Huex. It's a case comprised of two materials: a hard plastic back and a soft, rubber rim. It comes in multiple colours; this is the mint green one (you should probably have a look at the website to estimate the colour, cause these pics were taken in weird lighting). It is thick enough to protect the lens and provide a lip for the screen, but you can still use the 'superior swiping' on the rounded screen. The cutouts are well-positioned (the speaker holes line up absolutely perfectly) and you can still use your Lightning charger with it. All in all it's a pretty good case and I'm quite happy with it. If someone has it in 'white' or 'frost' I'd love to see some pictures, though, cause I am not sure about the colour yet
Here's the LAUT Huex. It's a case comprised of two materials: a hard plastic back and a soft, rubber rim. It comes in multiple colours; this is the mint green one (you should probably have a look at the website to estimate the colour, cause these pics were taken in weird lighting). It is thick enough to protect the lens and provide a lip for the screen, but you can still use the 'superior swiping' on the rounded screen. The cutouts are well-positioned (the speaker holes line up absolutely perfectly) and you can still use your Lightning charger with it. All in all it's a pretty good case and I'm quite happy with it. If someone has it in 'white' or 'frost' I'd love to see some pictures, though, cause I am not sure about the colour yet
Nice, might have to get the frost one. I don't like the branding though.
Spigen Neo Hybrid Metal - Satin Silver
Thoughts: Its a great case. The buttons are not as responsive as with no case but not a serious problem as its getting made out to be. If they send me a fix I will use it. If they don't it will honestly not bother me.
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
----------
Casemate Tough (Purple) iPhone 6
Thin,Dual Layer protection, Metal buttons with good response, not slick grip.
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
Thoughts: Its a great case. The buttons are not as responsive as with no case but not a serious problem as its getting made out to be. If they send me a fix I will use it. If they don't it will honestly not bother me.
----------
Casemate Tough (Purple) iPhone 6
Thin,Dual Layer protection, Metal buttons with good response, not slick grip.
Ntombi
macrumors 68040
I spoke too soon.
The Luvvitt case won't allow access for the 30-pin to lightning adapter, which is a dealbreaker. That's what I use to connect to my car stereo and the speakers in my kitchen. I'm really disappointed.
Can anyone recommend a very clear and very thin case that just covers the camera, and also fits that adapter?
Same, I wish they wouldn't do that, especially on a transparent case! If you do end up getting the frost, be sure to post some pics
webslinger85
macrumors 6502a
Casemate has some really nice cases this time around, but I can't get passed that massive camera cutout
AuroraProject
macrumors 65816
Agreed, lots of case makers are making those cutouts way too big.
webslinger85
macrumors 6502a
Unnecessarily big at that, as much as I love the design of the 6, I find it ugly when the antenna band peaks out of the cutout. I understand the concerns over flashback, but my Spigen case has a tiny pill cutout and there are zero flash issues
yanki01
macrumors 68040
midnight blue leather case in my silver iPhone 6.
![]()
apple leather case for iPhone 6 by Yanki01, on Flickr
![]()
apple leather case for iPhone 6 by Yanki01, on Flickr
![]()
apple leather case for iPhone 6 by Yanki01, on Flickr
![]()
apple leather case for iPhone 6 by Yanki01, on Flickr
apple leather case for iPhone 6 by Yanki01, on Flickr
apple leather case for iPhone 6 by Yanki01, on Flickr
apple leather case for iPhone 6 by Yanki01, on Flickr
apple leather case for iPhone 6 by Yanki01, on Flickr
heisenberg123
macrumors 603
I ordered one of these as well
As an Amazon Associate, MacRumors earns a commission from qualifying purchases made through links in this post.
6 Plus in a MODAL Flip (Reversible) Case
See thread below for my thoughts/more pics
https://forums.macrumors.com/threads/1792336/
I also have the spigen case and regarding the buttons if you put a small piece of tape on the inside of the buttons it'll fix the issue, I used a small piece of foam. Worked perfect
Your case is defective ! It has a giant cut mark above the touch ID I would return it
heisenberg123
macrumors 603
what screen guard is that?
Bentox
macrumors member
Vaja Top Flip for my '6. Have used them (the Top Flip specifically) since the 3GS and love their functionality, durability, and classy look.
![]()
