Swap Drives in Mac Studio

[320949]

Hello everyone!
I have two Mac Studios: 1) M1 Ultra with 2 terabytes SSD 2) M2 Ultra with 1 terabyte SSD. Can I swap SSDs in these machines? Will they start in new places? If it is possible and will it not destroy the SSD? I understand that the data will be lost, but the question is, will I be able to use these SSDs in new places after recovery...
The easiest thing is to try to do it, but I'm afraid to break both Mac Studios.

 

[MBehr2]

Upgrading Mac Studio storage

Hi, just tested yesterday an upgrade of a plain basic MacStudio M1 Max (2022) from 512GB to 4TB. and it works : take off the 512 GB NAND insert in the right order the two 2TB NANDs inside the slots restaure the MacStudio bridgeOS with another Mac and AppleConfigurator et voilà ...

forums.macrumors.com

Short answer: no

 

[Mr.Fox]

It is possible, as well as to increase SSD volume (for example, from 512GB to 8TB). You will need a programmer, microscope, soldering station and any mac to restore DFU and information database. The procedure takes several hours with a coffee break.

 

[320949]

Thank you, I read the thread from the link above. No comments, only sadness