Xserve (2008) keeps crashing

Discussion in 'Mac OS X Server, Xserve, and Networking' started by bradmclaughlin, May 6, 2013.

  1. bradmclaughlin, May 6, 2013
    Last edited: May 6, 2013

    bradmclaughlin macrumors newbie

    May 6, 2013
    Hi, my company is running an Xserve that I inherited from the previous guy in my position.

    During the day today, the server crashed on me about once every 30-45 minutes. I think it's due to heavy use, but it's unknown. I looked around the crash logs and couldn't find anything from today, but I did find a hang report in the DiagnosticReports folder.

    Just to start diagnosing today, I sat by the server for a little bit to listen for any weird noises or whatever to figure out when it was crashing. I heard the fans get really loud and then it rebooted.

    The weird thing is, when it reboots itself, the Server Admin app won't relaunch and the system needs to be rebooted again (you'll see that in the hang report).

    Any one out there have any ideas?

    Hang report attached.

    Attached Files:

  2. Consultant macrumors G5


    Jun 27, 2007
    Clone your drive to another drive and try from that drive?
  3. aarond12 macrumors 65816


    May 20, 2002
    Dallas, TX USA
    I don't see anything in the log that is a smoking gun. I have to agree with Consultant -- this could be a disk drive issue. Try running an application to check the SMART status of your drives. If that doesn't show anything, try cloning your system to an external USB hard drive and booting from that. It will be slow (this is only for testing purposes!), but it will let you see if the drive is the issue.
  4. gnasher729 macrumors P6


    Nov 25, 2005
    With a five year old computer, disk drive is indeed a good possibility, and fortunately very cheap to fix.
  5. Les Kern macrumors 68040

    Les Kern

    Apr 26, 2002
    can't boot an XServe from an external drive.
    Sounds like it is drive related though. Best bet is to add another drive, do a clean install then migrate over. passwords will need to be reset, but if you have few users it will be a snap.
  6. rlkarren macrumors newbie

    Jan 25, 2013
    Actually, you CAN boot an Xserve from an external drive or other Mac computer in target mode. It must be over firewire and the OS version must be compatible with the XServe. I have done it frequently.

    I'll 2nd or 3rd or 4th the failing drive hypothesis. At least that's where I would start. It could simply be a software corruption too. I have had both and both displayed similar symptoms. My fix was to re-install the Server OS and migrate settings from the old drive or from a backup.

    Before you do *anything though, backup, backup, backup...

Share This Page