Can i use my 27" mid2010 iMac as a display?
Is it possible to achieve this by connecting my late 2009 MacMini to it?
Is it possible to achieve this by connecting my late 2009 MacMini to it?
Can i use my 27" mid2010 iMac as a display?
Is it possible to achieve this by connecting my late 2009 MacMini to it?
This looks like a more comprehensive guide: https://support.apple.com/en-us/HT2045921. Why do i need to make the PRAM reset?
2. How do i make make the PRAM reset?
3. Since the mini doesn't really need to be far away from the iMac, then i guess its ok to buy the shortest MDisplay port to MiniDisplay port cable?
4. Regarding the issues, isn't there a way to bypass them? Cause both full brightness and full speed fans running are strong negative No-No's in doing this project. 🙁
1. Why do i need to make the PRAM reset?
2. How do i make make the PRAM reset?
3. Since the mini doesn't really need to be far away from the iMac, then i guess its ok to buy the shortest MDisplay port to MiniDisplay port cable?
4. Regarding the issues, isn't there a way to bypass them? Cause both full brightness and full speed fans running are strong negative No-No's in doing this project. 🙁
#Nguyen Duc Hieu Are you are using a PC, like a Windows computer? Is that what you are saying?
Can't the brightness be reduced by the keyboard used to work on the Mini?
You can adjust the brightness using a keyboard connected to the iMac even while it is in TDM. This is because the iMac is still fully running and responding to the keyboard connected to it, otherwise the Command-F2 shortcut wouldn't work either.To turndown Brightness, one must use software solution.
You can adjust the brightness using a keyboard connected to the iMac even while it is in TDM. This is because the iMac is still fully running and responding to the keyboard connected to it, otherwise the Command-F2 shortcut wouldn't work either.
So those 2 issues u are referring to (especially the first), could it be due to the fact that you are using a Windows PC for your setup?Issues: The iMac display will be at maximum brightness, fans run at full speed because of the heat.
This should not be a long-term setting.
So those 2 issues u are referring to (especially the first), could it be due to the fact that you are using a Windows PC for your setup?
That's the issue right there. Using the original Apple keyboard that came with my 2010 iMac allows me to control the brightness just fine while it's in TDM. In other words: the iMac's display will not be stuck at full brightness - it's a matter of using the correct keyboard. It's a shame the iMac is so picky about that, but that's the way it is.And I don't have the Apple keyboard & mouse, either. I just have some cheap USB keyboard hooked up to the iMac.
The source doesn't matter at all. And the backlight can be controlled using the original Apple keyboard that came with the iMac.So those 2 issues u are referring to (especially the first), could it be due to the fact that you are using a Windows PC for your setup?
That's the issue right there. Using the original Apple keyboard that came with my 2010 iMac allows me to control the brightness just fine while it's in TDM. In other words: the iMac's display will not be stuck at full brightness - it's a matter of using the correct keyboard. It's a shame the iMac is so picky about that, but that's the way it is.
The source doesn't matter at all. And the backlight can be controlled using the original Apple keyboard that came with the iMac.
I hear you. Sorry if I came across as grouchy or anything, I didn't mean to.Nice input, maybe I'll buy an USB Apple keyboard to try. Just hate the price.
I hear you. Sorry if I came across as grouchy or anything, I didn't mean to.
Sure, but TDM over Thunderbolt requires the source to be running macOS so it's quite a bit less versatile than TDM over Displayport. And it doesn't work with an M1 Mac as the source either.I learnt from a Youtuber that TDM works on 21,5" iMasc with Thunderbolt 1/2 ports, too. (iMac 2012~2014)
Isn't it amazing?
Hmm there seems to be an issue when wanting to use the mid2010 iMac as a display. A friend was telling me that if i want to connect a mini, then that mini needs to have the same OS or at least an OS before Catalina (if i remember correctly).
At the moment i have:
mid 27" 2010 iMac
late 2009 mini
but im interested if the M1 mini can be connected to my mid 2010 27" iMac
I guess I was mainly thinking about the M1mini