Hey there, I bought mine off of Amazon before they ran out of stock..
And I noticed some people had requested some pictures.. so I took some using my brothers phone...
Got a tip for us?
Let us know
Become a MacRumors Supporter for $50/year with no ads, ability to filter front page stories, and private forums.
6S/6s+ glass protector discussion [Merged]
- Thread starter ricktat
- Start date
- Sort by reaction score
Hey there, I bought mine off of Amazon before they ran out of stock..
And I noticed some people had requested some pictures.. so I took some using my brothers phone...
Looks super curved and smooth! Still too bad Amazon doesn't offer it for the 6S Plus. I'm salty about that. 
how do you figure these edge to edge fit a case like this?
http://www.caudabe.com/collections/...ries/products/the-veil-xt-iphone-6s-plus-wisp
not sure about compatibility..
also, the Cinder really looks thinner.
http://www.caudabe.com/collections/...ries/products/the-veil-xt-iphone-6s-plus-wisp
not sure about compatibility..
also, the Cinder really looks thinner.
The advertised thicknesses of Cupert's Cinder and Goldsmith's Ice Max 3D are the same: .19 mm & .20 mm
Last edited:
oh, sorry,
i meant that the Cinder is thinner than these other protectors (b-noble, etc)
so i'm still fully confused regarding the REAL 3D protectores out there:
Cinder
Imos
B-noble?
Ice Max?
i think that's it.
Imo Cinder looks the best, and with a fitting pricetag
I posted this photo in your other thread (probably got merged in here somewhere), but I don't think the B-noble is really 3D. Look at the bottom right photo..looks like a flat protector to me.
Also:
The image at the top IS "3D edge," but, you're right: the bottom-right photo is NOT 3D edge. It looks like "edge-to-edge" 2.5D to me.I posted this photo in your other thread (probably got merged in here somewhere), but I don't think the B-noble is really 3D. Look at the bottom right photo..looks like a flat protector to me.
Also:
Yea, I trust user reviews more than their photos. Here's another not happy with their B-noble:
Sooo nice. Sooo jealous. Wish I could get my hands on that sooner.
Hey there, I bought mine off of Amazon before they ran out of stock..
And I noticed some people had requested some pictures.. so I took some using my brothers phone...
Yeah those reviews are a bit troubling...
My B-Noble is arriving tomorrow, I'll do a full review with pics once I install it. I have no problem with returns to Amazon so if it doesn't work then that's okay.
I'm over the Daswise as a long-term solution. Dust and debris get under the screen and it has a very sharp edge that thankfully my case protects me from.
My B-Noble is arriving tomorrow, I'll do a full review with pics once I install it. I have no problem with returns to Amazon so if it doesn't work then that's okay.
I'm over the Daswise as a long-term solution. Dust and debris get under the screen and it has a very sharp edge that thankfully my case protects me from.
Looks super curved and smooth! Still too bad Amazon doesn't offer it for the 6S Plus. I'm salty about that.
Am I missing something here?
http://www.amazon.com/gp/product/B011R0LDSY?psc=1&redirect=true&ref_=oh_aui_detailpage_o00_s00
As an Amazon Associate, MacRumors earns a commission from qualifying purchases made through links in this post.
Glas the update
So I can like see the liquid somewhat across the edges of the screen mostly the left side (up and down)
Everything seems fine and sticking well, I do have a small like bubble at the edge of the top left corner but that could be that I took it off and put it back on multiple times when applying it due to dust and being crooked etc
It's definitely to much of a gap between where it ends and the edge of the phone
Bottom seems to be sticking fine, noticed I have like a small dust under the screen but it's not causing a bubble so I am going to leave it as I have no air being shown through the protector besides the top left corner where I lifted it with my nail multiple times
So do I have a good case or did speigen fix the bottom not sticking issue (the packing said 6s plus and plus maybe the ones with the issue just said 6 plus)
Or does the issue come over time?
I still do have the max boost coming just incase but honestly if I could cancel it at the moment I would order a second speigen
What was the issue with the maxboost?
So I can like see the liquid somewhat across the edges of the screen mostly the left side (up and down)
Everything seems fine and sticking well, I do have a small like bubble at the edge of the top left corner but that could be that I took it off and put it back on multiple times when applying it due to dust and being crooked etc
It's definitely to much of a gap between where it ends and the edge of the phone
Bottom seems to be sticking fine, noticed I have like a small dust under the screen but it's not causing a bubble so I am going to leave it as I have no air being shown through the protector besides the top left corner where I lifted it with my nail multiple times
So do I have a good case or did speigen fix the bottom not sticking issue (the packing said 6s plus and plus maybe the ones with the issue just said 6 plus)
Or does the issue come over time?
I still do have the max boost coming just incase but honestly if I could cancel it at the moment I would order a second speigen
What was the issue with the maxboost?
Last edited:
You might be able to understand my not being able to find it seeing as this never came up in any searches. It isn't even listed as the same vendor.
As an Amazon Associate, MacRumors earns a commission from qualifying purchases made through links in this post.
Can anyone confirm that this is the same screen protector that everyone is raving about?
I ordered one. Let's hope it's the real deal, latest model and actually for the plus. It'll be here Thursday.
As an Amazon Associate, MacRumors earns a commission from qualifying purchases made through links in this post.
Someone here with the combination Godosmith Ice Max and Apple Leather or Silicone Case ? Does These casese fits with the Godosmith Ice Max ? I'm coming from Germany and Amazon doesn't ship the Cinder to me. So I have to look for an other 3D Glass Screen Protector. The Godosmith Ice Max looks so amazing and Aliexpress ships worldwide.
Kind regards
Matthias
Kind regards
Matthias
looks like the same thing just higher in price
http://www.amazon.com/G-D-SMITH®-Ul...ne+6+Plus+with+9H+Hardness/Anti-scratch+black
im torn now between it and the cinder
As an Amazon Associate, MacRumors earns a commission from qualifying purchases made through links in this post.
I'd go with the Ice Max. A ton of people still waiting for their CINDER.
As an Amazon Associate, MacRumors earns a commission from qualifying purchases made through links in this post.
Not sure if this has been mentioned, but my friend who works for ATT, got me the Ivisor tempered glass last night, it reminds a lot of the other edge to edge screen protectors, but so far it works perfect, especially in apples leather case. I didn't pay the $48.00, $25.00 but better than ordering and ordering different once off amazon. It is for sure worth checking out!
Now that it's no longer available for Amazon Prime, shipping has slipped to November 3-20. So that's a bummer.