Apple Seeds Third iOS 9.2 Beta to Developers and Public Beta Testers

[iPhil]

its showing as 1.4GB OTA on iPhone 6 128...

 

[aznkid25]

Hmm updated (1.4gb on iP6) and showed build 13C71. Then check for updates again and was prompted to update again. Above a poster said build was 13C5071. Strange. Its running again so will see what happens this time around.

[Edit] Well same deal. Updated again and still shows 13C71 but check for updates shows beta 3 available to download. Anyone else?

Same thing here. Updated to build 13C71, then checked for updates, & 9.2 public beta 3 is being downloaded again. This is on an iPhone 4s

 

[Kidder1994]

Excuse me, does someone have any issue with Touch ID in 9.1? actually it works very good, but sometimes i turn on the screen and put on my finger but the sensor does not even recognize that my finger is touching the button... after i move the screen around (like siri and notification center) i put my finger again and start to work flawlessly... it happens randomly... it is a bug or could be a hardware fault?

Thx in Advance!

 

[Mlrollin91]

Anyone that has to redownload PB3 a second time, does it prompt for a third? I don't want to download it if I am going to be in an endless loop of having the stupid '1' above Settings.

 

[Westside guy]

I'll be curious to see if they've finally fixed the play/pause issue where, if you're listening to podcasts but don't have the podcast app in to foreground, after you pause it iOS 9 often seems to decide "oh, I bet he'd rather listen to music than go back to that boring old podcast".

 

[ohio.emt]

Same thing here. Updated to build 13C71, then checked for updates, & 9.2 public beta 3 is being downloaded again. This is on an iPhone 4s

Same on my 6s+, also att number sync seems to be gone.

 

[guyking54]

I found this strange that I had the public beta install and went check for updates and I said that ios 9.2 public beta 3 and said the update was 1.4 GB also I uninstall public beta and restart my phone then I check for updates then told me ios 9.2 beta 3 and the update was 175 Mb so my question is whats the difference between public beta and 9.2 beta by the way I have iPhone 6

 

[skwood]

I found this strange that I had the public beta install and went check for updates and I said that ios 9.2 public beta 3 and said the update was 1.4 GB also I uninstall public beta and restart my phone then I check for updates then told me ios 9.2 beta 3 and the update was 175 Mb so my question is whats the difference between public beta and 9.2 beta by the way I have iPhone 6

Only difference you would notice is the build number I assume.

 

[iamMacPerson]

Hmm updated (1.4gb on iP6) and showed build 13C71. Then check for updates again and was prompted to update again. Above a poster said build was 13C5071. Strange. Its running again so will see what happens this time around.

[Edit] Well same deal. Updated again and still shows 13C71 but check for updates shows beta 3 available to download. Anyone else?

Same thing happened on my 6s Plus, but it was a full 1.6GB update. After the update, same 13C71 build number (dev build) as you, then Software Update prompted me to install he update again. The only way I'm seeing to fix this would be a restore via iTunes.

I also did the update a second time, same thing. It's in a loop.

 

[zorinlynx]

Needs dev implementation

That's odd, I can swipe back the Safari view controller away in Tweetbot, on iOS 9.1.

So it's already possible.

 

[wepiii]

update loop here as well. 6S Plus 64GB. Both updates were over 1 GB. Strange. I'll just live with the "1" for now

 

[aj8690]

Same thing happened on my 6s Plus, but it was a full 1.6GB update. After the update, same 13C71 build number (dev build) as you, then Software Update prompted me to install he update again. The only way I'm seeing to fix this would be a restore via iTunes.

I also did the update a second time, same thing. It's in a loop.

Same issue on 6s Plus. But I went from 9.1 > 9.2 Public Beta 3 OTA. Not even going to bother trying to install the update again since updating again doesn't seem to be solving for anyone.

 

[DCJ001]

Apple has missed a frustrating detail here: Restrictions. iOS restrictions allow children to be safe while on the internet on an iOS device. "Limit Adult Content" in Restrictions settings removes the ability to clear Safari browser history, and it disables Private Mode, UNLESS you're on a 6S or 6S Plus, where 3D Touching the Safari icon allows access to Private Mode regardless of the iOS Restriction. This is very frustrating, because the entire purpose of "Limit Adult Content" can be completely circumvented by a simple 3D Touch. Apple, please fix! Remove Private Mode from the 3D Touch selection of Safari-

Hopefully, you submitted this feedback through the Feedback app that comes with iOS betas.

There is no evidence that anyone at Apple reads macrumors.com.

 

[wepiii]

wow this seems to completely remove number sync for att. don't update yet if you are using that

 

[A MacBook lover]

Hopefully, you submitted this feedback through the Feedback app that comes with iOS betas.

There is no evidence that anyone at Apple reads macrumors.com.

Do you really think that no one at Apple reads macrumors? When people are logging on to macrumors with ios10

 

[wepiii]

deleting the public beta profile and rebooting got rid of the settings "1".

 

[C DM]

Do you really think that no one at Apple reads macrumors?

Some might, but it doesn't make it a place where all issues get picked out of and worked on. Some might here and there, but people who have issues or feedback should still report them to Apple if they actually want at least a slightly higher chance of making sure that someone at Apple would see them.

 

[WaruiKoohii]

13C71 on my 6s, no prompt to download and install again. My update was something like 120MB.

 

[Shaqtus]

Hmm updated (1.4gb on iP6) and showed build 13C71. Then check for updates again and was prompted to update again. Above a poster said build was 13C5071. Strange. Its running again so will see what happens this time around.

[Edit] Well same deal. Updated again and still shows 13C71 but check for updates shows beta 3 available to download. Anyone else?

Im experiencing this too. Updated, then an option to update was available again. Did it again, an option to update is still available.

 

[SirCheese]

Same on my iPhone 6

1.6GB for me.

 

[gsmornot]

wow this seems to completely remove number sync for att. don't update yet if you are using that

While the setting is gone, the feature still works on my iPad and Watch.

 

[Shaqtus]

Deleted iOS Public Beta profile, and reinstalled the profile and the option to update went away.

 

[Ibookg6]

Apple fix pressure measure in iOS weather app?

 

[Shaqtus]

Anyone that has to redownload PB3 a second time, does it prompt for a third? I don't want to download it if I am going to be in an endless loop of having the stupid '1' above Settings.

delete profile and reinstall it.

 

[Dwalls90]

Anyone that has to redownload PB3 a second time, does it prompt for a third? I don't want to download it if I am going to be in an endless loop of having the stupid '1' above Settings.

Same thing happened on my 6s Plus, but it was a full 1.6GB update. After the update, same 13C71 build number (dev build) as you, then Software Update prompted me to install he update again. The only way I'm seeing to fix this would be a restore via iTunes.

I also did the update a second time, same thing. It's in a loop.

update loop here as well. 6S Plus 64GB. Both updates were over 1 GB. Strange. I'll just live with the "1" for now

Same issue on 6s Plus. But I went from 9.1 > 9.2 Public Beta 3 OTA. Not even going to bother trying to install the update again since updating again doesn't seem to be solving for anyone.

Issue was fixed

delete profile and reinstall it.