Become a MacRumors Supporter for $50/year with no ads, ability to filter front page stories, and private forums.
Status
Not open for further replies.
Matte clear looks nice. Wish I waited before picking up my wood skin.

It's not out yet. I have no ETA. :)

Which wood did you pickup?

Weston
Slickwraps

678w8Md.jpg
 
Aaarrrggghhh!!

Face down on concrete?! :eek:


Lol, anyway...... If I didn't use a case I'd definitely have one of these stuck to my 6.

Look great.
 
hmmm, I keep coming back here. looking at all those skinned iPhones.

I really need to either order or just keep it naked.
 
It's not out yet. I have no ETA. :)



Which wood did you pickup?



Weston

Slickwraps


ImageUploadedByTapatalk1413433051.525036.jpg

Mahogany. I like it although I've had wood backs since the 4S so matte clear would be a nice change. I have a question Weston, on the bottom flaps they came up a bit short and have a thin gap on each side. Do you recommend removing and stretching it out or better to just leave it be?
 
Weston any plans to make a screen protector that fits in between the front wrap, maybe and anti glare one?

All full-body Slickwraps iPhone 6 & 6 Plus ship with two (2) XD screen protectors that fit instead of the front wrap.

I will submit a request for anti-glare.

Weston
Slickwraps


View attachment 504965

Mahogany. I like it although I've had wood backs since the 4S so matte clear would be a nice change. I have a question Weston, on the bottom flaps they came up a bit short and have a thin gap on each side. Do you recommend removing and stretching it out or better to just leave it be?

Looks Great!

The deep grain and texture of the Mahogany is a BOSS look.

1. Grab a small paper clip.
2. Heat one of the corners first to loosen up it's grip.
3. Take the paper clip and use it to slowly left up the edge of the flap.
4. Once lifted, reheat really good and then reapply.

Weston
Slickwraps
 
Weston I placed an order on 10/10 for a brushed onyx full wrap. It is now 10/16 and it hasn't even shipped yet.
 
Ordered my Gold Flake Ebony on 10/3, just received it an rushed and installed it on my gold 6. I messed up on one corner, i'll try to fix it later on.
 

Attachments

  • image1.JPG
    image1.JPG
    1 MB · Views: 410
  • image2.JPG
    image2.JPG
    1.4 MB · Views: 355
  • image3.JPG
    image3.JPG
    836 KB · Views: 587
Weston I placed an order on 10/10 for a brushed onyx full wrap. It is now 10/16 and it hasn't even shipped yet.

Can you email or DM me your order #?

Thank you.
Weston
Slickwraps

----------

Ordered my Gold Flake Ebony on 10/3, just received it an rushed and installed it on my gold 6. I messed up on one corner, i'll try to fix it later on.

Love the Gold Flake. Timeless look.

It looks a little off, but needless to say it's still awesome.

If you can't figure out the corner let me know! I want you to be 100% satisfied.

Weston
Slickwraps
 
I'm new to these wraps for the phone. What kind of protection do these offer? Just scratches that would normally appear over time? I wouldn't imagine that these prevent the dings and dents, or if I were to drop it on the floor (carpet or tile)
 
It won't let me DM you. My order # is 223910 Thanks

Hey there.. Remind me to be nice to you. :) "saw the address"

We can tell via our logistic cams it was packaged and labeled, but no scan from USPS. :(

We're overnighting this today, you'll have it tomorrow. When the second one finally makes it's way, keep it as a gift.

I'll have the team send over the tracking.

Weston
Slickwraps
 
Hey there.. Remind me to be nice to you. :) "saw the address"

We can tell via our logistic cams it was packaged and labeled, but no scan from USPS. :(

We're overnighting this today, you'll have it tomorrow. When the second one finally makes it's way, keep it as a gift.

I'll have the team send over the tracking.

Weston
Slickwraps

Thanks alot!
 
Any more pics of the clear?

No. But I'll post a few more today for you.

Weston
Slickwraps

I'm new to these wraps for the phone. What kind of protection do these offer? Just scratches that would normally appear over time? I wouldn't imagine that these prevent the dings and dents, or if I were to drop it on the floor (carpet or tile)

Hello,

They truly provide loads more style than protection. Of course minimal protection from small drops and ultimate protection against scratches.

Manufactures spend millions of dollars on R&D to make a device look and feel a certain way in your hand. Our goal is to keep the same intended design of the phone "naked feel" without adding unnecessary bulk.

If protection is key, we've seen a lot of people post about using Slickwraps with clear TPU cases, clear SPG cases and Apple's Silicone cases.

Hope this helps.
Weston
Slickwraps

----------

Thanks alot!

NP. In the meantime check out our installation video.

http://youtu.be/GTeuBUqjapc

Thank you.
Weston
Slickwraps
 
Hello,

They truly provide loads more style than protection. Of course minimal protection from small drops and ultimate protection against scratches.

Manufactures spend millions of dollars on R&D to make a device look and feel a certain way in your hand. Our goal is to keep the same intended design of the phone "naked feel" without adding unnecessary bulk.

If protection is key, we've seen a lot of people post about using Slickwraps with clear TPU cases, clear SPG cases and Apple's Silicone cases.

Hope this helps.
Weston
Slickwraps


Great!, I'll order one now for my 5s and see how I like it
 
Got my slickwraps today, it looks great. I had a hard time getting it lined up which I think is how something got underneath and now I have a small bump in the back;(. Not anything bad. Using a heatgun it came out pretty good. My only thing so far I don't like is its thick enough that I don't easily feel where the power and volume buttons are anymore.

And everything is so precise, but then there's one cutout for the volume buttons instead of two?
 
Last edited:
Got my slickwraps today, it looks great. I had a hard time getting it lined up which I think is how something got underneath and now I have a small bump in the back;(. Not anything bad. Using a heatgun it came out pretty good. My only thing so far I don't like is its thick enough that I don't easily feel where the power and volume buttons are anymore.

And everything is so precise, but then there's one cutout for the volume buttons instead of two?

Thank You. We spent a total of 300 hours and hundreds of revisions to make this the best wrap in the world for the iPhone 6 & 6 Plus.

We did try the recessed part between the volume buttons, but found install issues, weakness point and long term application issues by doing so. Not only are we working with very small piece of material, but also a sharp deep surface. I made a-little graphic to illustrate.

Thank You,
Weston
Slickwraps

9eFpVaw.jpg
 
Thank You. We spent a total of 300 hours and hundreds of revisions to make this the best wrap in the world for the iPhone 6 & 6 Plus.

We did try the recessed part between the volume buttons, but found install issues, weakness point and long term application issues by doing so. Not only are we working with very small piece of material, but also a sharp deep surface. I made a-little graphic to illustrate.

Thank You,
Weston
Slickwraps

Image

Makes sense about the recesse between the volume buttons, it doesn't bother me, just was surprised.

I'm hoping to be able to get the corners a little better. Will it be possible to use heat gun to do this better later? And that bump/ridge along the bottom?

71a048bf67b09cc3a46ba119d89cb19d_zps0ef1eb35.jpg


8ab1432cb56b25f91254cdf125bc8c2c_zps541bd8b6.jpg


e3914c4881dba45053273fa7f2ded737_zps54589f18.jpg


b8a2b56892e040876f1cd468c859d13a_zpsb70aef9d.jpg
 
Last edited:
Can you email or DM me your order #?

Thank you.
Weston
Slickwraps

----------



Love the Gold Flake. Timeless look.

It looks a little off, but needless to say it's still awesome.

If you can't figure out the corner let me know! I want you to be 100% satisfied.

Weston
Slickwraps

Tried heating and re-pulling the corner and it actually got torn.
 
Tried heating and re-pulling the corner and it actually got torn.

Just reach out to us at support@slickwraps.com

Weston
Slickwraps

----------

Makes sense about the recesse between the volume buttons, it doesn't bother me, just was surprised.

Yeah, it looks like maybe it was heated almost to much. :) Try heating again and smooth down and report back.

Weston
 
Just took this of my personal iPhone 6 Plus I installed over lunch.

The key to the back and side like the install video points out is to heat first then push down not the other way around. Hope this helps!

Color Collection Red.

Weston
Slickwraps

oPq7N5j.jpg
 
Status
Not open for further replies.
Register on MacRumors! This sidebar will go away, and you'll see fewer ads.