Become a MacRumors Supporter for $50/year with no ads, ability to filter front page stories, and private forums.
So will it now be possible to connect the Iphone direct to a router to extend the wifi and keep the connection up?
 
The net throughput isn’t quite 1 Gbps with gigabit ethernet either, so from what I've seen Wifi 6 is comparable under optimal conditions.
In speed maybe. In latency, consistency and reliability no wifi compares to wired which is why I'd rather restore my iPhone from a backup using a lightning to USB adapter and then a USB gigabit network interface even though it will max out at around 400 Mbps.
 
  • Like
Reactions: dabotsonline
That’s what I’m seeing with Xfinity too. They’ve been promising symmetrical upload and download speeds for more than a year, but I’ve yet to hear anything concrete. And trying to speak to anyone who knows is an exercise in frustration.
Talked with the Xfinity installers who were doing some work on my street. Told me they were upgrading to support 3 Gbps and making it more symmetric. Haven't seen it being available though.
with ethernet you get even more, as it is full duplex,

Not what I am seeing on a Studio.

Ethernet

Screenshot 2023-09-24 at 06.42.22.png
6E

Screenshot 2023-09-24 at 06.43.17.png


I ran Speedtest on my iPhone 15 Pro over ethernet adapter and reached 930Mbps

which is pretty much the maximum given overhead.

I have no easy way to test intra-network speeds.

there is a program called "Network Speed Tester" which allows you to test your intranet. Right now though it is not giving me the expected results. Neither is iperf3 for some reason (574 Mbps).
 
  • Like
Reactions: dabotsonline
Haven't seen it being available though
It'll get there eventually. But DOCSIS 4 is the end of the line. No interest in developing or deploying a fifth version.

Hopefully they can figure out a way to get rid of docsis entirely and use the existing cable infra as more of an ethernet dumb pipe, since the wire itself has plenty of bandwidth. its docsis holding it back.
 
  • Like
Reactions: dabotsonline
I have Orbi mesh with WiFi 6 and it is the only mesh that seems to work out in my guest house.

A long distance is always a problem. Can be fixed but not easy or cheap.

But DOCSIS 4 is the end of the line.

Did you mean DOCSIS 3?

 
In speed maybe. In latency, consistency and reliability no wifi compares to wired which is why I'd rather restore my iPhone from a backup using a lightning to USB adapter and then a USB gigabit network interface even though it will max out at around 400 Mbps.
Yes. I was actually arguing in favor of Ethernet, since most people don’t even have a Wifi 6 router.
 
  • Like
Reactions: user1234
Did you mean DOCSIS 3?
No. D3 is what is widely deployed now, and they're moving to D4 to bring multi gig and symmetric. What I'm saying is there is no interest for DOCSIS 5 because just stringing fiber would be cheaper and easier.

Operators debate whether to stick with DOCSIS or upgrade to FTTP

"We know it's not going to stop with DOCSIS 4.0. We're going to have to put additional capital into a DOCSIS 4.1 or 4.2, or 5.0 – it's going to keep going," Williams said. "So maybe it's time to take the hit and go ahead and launch fiber-to-the-home."
 
  • Like
Reactions: dabotsonline
What people don’t understand about 6E using 6Ghz band is that 6Ghz requires extremely close proximity and no obstructions in order to attain those big speeds.

2.4Ghz = slower but much longer range and moves through objects better

5Ghz = faster but shorter range and moves through objects more poorly

6Ghz = very fast speed but much shorter range and moves very poorly through objects

6Ghz viability relies on mesh networks really.
 
I’ll have to test this with my 2.5gbe usb c dongle. I have WiFi 6e, so my 15 pro gets over gigabit wirelessly.
 
Has anyone managed to get full speeds using a USB hub? Mine cut the speeds down to 480Mbps even though iOS recognized the adapter as a 2.5GbE one.
 
  • Like
Reactions: dabotsonline
This has been possible for a long time. I remember trying USB to Ethernet adapters (using the Lightning to USB adapter) many years ago. Granted, it was limited to USB 2.0 speeds, so it’s nice that the limitation is now removed with the Pro series.
 
Has anyone managed to get full speeds using a USB hub? Mine cut the speeds down to 480Mbps even though iOS recognized the adapter as a 2.5GbE one.

I dunno if you consider this a USB hub, or an adapter. But I get 928/942 Mbps when connected to this thing:
 
  • Like
Reactions: dabotsonline
You do know they sell ethernet lightning adaptors too right?
I recall trying one of these back in the day. If I recall correctly, it was essentially a USB Ethernet adapter but with a lightning connector, and limited to USB 2.0 speeds. Thus, it maxed out at 480Mbps. Still certainly useful for 95% of Ethernet tasks, but not full gigabit.
 
  • Like
Reactions: dabotsonline


Following the launch of the iPhone 15 series today, a few readers of our website have reached out to highlight that the devices support USB-C to Ethernet adapters, allowing for a wired internet connection with faster download speeds than Wi-Fi.

iPhone-15-Pro-Ethernet.jpg

iPhone 15 Pro connected to an Ethernet cable via former MacRumors editor turned car reviewer Jordan Golson

Apple confirmed this information in a support document last week, with USB to Ethernet adapters listed as compatible with iPhone 15 models. When an iPhone is connected to an Ethernet cable, an otherwise hidden Ethernet menu appears in the Settings app with IP-related information and various configuration options.

One reader informed us that their iPhone 15 Pro connected to Ethernet achieved a peak download speed of over 800 Mbps in a speed test.

iPhone-15-Pro-Ethernet-Setting.jpg

While this is one of the various clever ways that the USB-C port on the iPhone 15 models can be used, it should be known that previous iPhones with the Lightning connector also supported Ethernet with an adapter. Nevertheless, we have decided to highlight this information as a helpful tip since it is getting attention.

All four iPhone 15 models launched today in the U.S. and more than 40 other countries.

Article Link: iPhone 15 Models Support USB-C to Ethernet for Faster Internet Speeds
Tested
 

Attachments

  • IMG_5447.PNG
    IMG_5447.PNG
    3.7 MB · Views: 252


Following the launch of the iPhone 15 series today, a few readers of our website have reached out to highlight that the devices support USB-C to Ethernet adapters, allowing for a wired internet connection with faster download speeds than Wi-Fi.

iPhone-15-Pro-Ethernet.jpg

iPhone 15 Pro connected to an Ethernet cable via former MacRumors editor turned car reviewer Jordan Golson

Apple confirmed this information in a support document last week, with USB to Ethernet adapters listed as compatible with iPhone 15 models. When an iPhone is connected to an Ethernet cable, an otherwise hidden Ethernet menu appears in the Settings app with IP-related information and various configuration options.

One reader informed us that their iPhone 15 Pro connected to Ethernet achieved a peak download speed of over 800 Mbps in a speed test.

iPhone-15-Pro-Ethernet-Setting.jpg

While this is one of the various clever ways that the USB-C port on the iPhone 15 models can be used, it should be known that previous iPhones with the Lightning connector also supported Ethernet with an adapter. Nevertheless, we have decided to highlight this information as a helpful tip since it is getting attention.

All four iPhone 15 models launched today in the U.S. and more than 40 other countries.

Article Link: iPhone 15 Models Support USB-C to Ethernet for Faster Internet Speeds

This guy (see link below) got an iPhone 15 Pro Max to do 1.4 gbps down and 1.2 up via WiFi 6E.

 
  • Like
Reactions: dabotsonline
Register on MacRumors! This sidebar will go away, and you'll see fewer ads.