Toggle sidebar Toggle sidebar
Become a MacRumors Supporter for $50/year with no ads, ability to filter front page stories, and private forums.

macOS 11 Big Sur on Unsupported Macs Thread

Status
The first post of this thread is a WikiPost and can be edited by anyone with the appropiate permissions. Your edits will be public.
thatsmeonlyme said:
So I thought it. How did you apply? Creating new patched Stick with V 0.0.19?
Click to expand...
I ran the unpatch.sh in 0.0.19 using the usb installer I already had with 0.1.0 after that I repatched it with micropatcher.sh, rebooted to the usb installer, ran the setvar script and then the kext script without rebooting between them. Reboot and, hopefully, all will be working

Before:
Captura_de_ecra_2020-08-21_as_17.42.05.png


After:
Captura_de_ecra_2020-08-23_as_20.39.25.png
 
  • Like
Reactions: abelpinate, TimothyR734, webg3 and 1 other person
thatsmeonlyme said:
If you want a working airdrop and handoff there is no other way to fall back to PB1 and then following the above steps. I left my MBP on DP4 for this reason. My late 2011 went back to catalina for there I had the possibility to get CAT working with the result to have working airdrop.
Click to expand...
OK. No Problem to re install DP 4...
Thanks You Very much.
Good Luck and keep share
 
  • Like
Reactions: TimothyR734 and thatsmeonlyme
LuisN said:
I ran the unpatch.sh in 0.0.19 using the usb installer I already had with 0.1.0 after that I repatched it with micropatcher.sh, rebooted to the usb installer, ran the setvar script and then the kext script without rebooting between them. Reboot and, hopefully, all will be working

Before:
View attachment 947035

After:
View attachment 947036
Click to expand...
YES It'S WORK !!!
Briliant
TQ Bro
Big Sur PB 2 MBP 2012 13" Work Ok
BS dual Boot Catalina MD101
 

Attachments

  • Screen Shot 2020-08-24 at 04.45.25.png
    Screen Shot 2020-08-24 at 04.45.25.png
    849.7 KB · Views: 227
  • Screen Shot 2020-08-24 at 04.53.39.png
    Screen Shot 2020-08-24 at 04.53.39.png
    620.7 KB · Views: 235
  • Screen Shot 2020-08-24 at 20.11.59.png
    Screen Shot 2020-08-24 at 20.11.59.png
    1.2 MB · Views: 207
Last edited:
  • Like
Reactions: TimothyR734, LuisN and thatsmeonlyme
LuisN said:
I ran the unpatch.sh in 0.0.19 using the usb installer I already had with 0.1.0 after that I repatched it with micropatcher.sh, rebooted to the usb installer, ran the setvar script and then the kext script without rebooting between them. Reboot and, hopefully, all will be working

Before:
View attachment 947035

After:
View attachment 947036
Click to expand...
THX --> working now especially Handoff now working in both directions.
 
  • Like
Reactions: abelpinate, TimothyR734 and LuisN
As I promised I attach an installation guide for a working installation of DP5 or PB 2 on Mid 2012 MacBook Pro machines. For my initial situation coming from DP4 installation using Barry K. N´s micro patcher V 0.0.1 booted into USB recovery I had to reboot after applying the set-vars command and had to apply it a second one. Then the installer worked.

You will use the installation guide to your own risk although I hope to have it made right
 

Attachments

  • Like
Reactions: Ghostrider66, abelpinate, macinfo and 4 others
LuisN said:
I ran the unpatch.sh in 0.0.19 using the usb installer I already had with 0.1.0 after that I repatched it with micropatcher.sh, rebooted to the usb installer, ran the setvar script and then the kext script without rebooting between them. Reboot and, hopefully, all will be working

Before:
View attachment 947035

After:
View attachment 947036
Click to expand...
Do you think this should work on late 2011 with upgraded WIFI Board too (Board from Mid 2011)
 
  • Like
Reactions: TimothyR734
iMac-Oldschool said:
Tried to install Public Beta 2 on an iMac8, largely following the procedure in post #2730. BigSur BaseSystem legacy usb fix.zip built the installer, as defined in post #3409, but it did would boot.
BigSur Penryn beta3 prelinkedkernel fix enables booting (post #3258), but system hangs at the end of progress bar.
Neither of the OpenCoreAPFS loaders solves the problem. USBOpenCoreAPFSloader3b and USBOpenCoreAPFSloader4 both install on a suitable USB stick and can be booted. However, macOS never starts and the system remains at the end of the progress bar.
Has anybody managed to boot PB2 on a non-metal Mac?
I also have an iMac 13,1, which has Metal graphics but Big Sur is not officially supported by Apple. Using Barry K. Nathan's Micropatcher.sh, Big Sur installs and runs without major problems.
Click to expand...
On MBP5,2, PB2/DP5 (version 16.0.16).
I followed the same procedure to produce the USB BS installer, and to install to a freshly erased SSD on SATA. The disk is now on USB.
Same result as iMac-Oldschool saw for booting: it will hang at the end of the progess bar, with OpenCore (from USBOpenCoreAPFSloader4) or with the Apple boot selector. I only report here for a small piece of diagnostic:

When booting with CMDS+S into single-user mode and then typing exit, the hang manifests itself as shown in the attached photos. Looping on apfs_get_firmlink_target_vnode:2009: vnode_lookupat(xxx) failed with error 2 where xxx regards private, Library, or System/Library/Caches.

On a different SSD, I have DP4 running fine. USB BS installer for that prepared with the previous BigSur BaseSystem legacy usb fix.zip. (EDIT: it is not PB1, but DP4 (build 20A5343i) on that disk - should make no difference.)
 

Attachments

  • IMG_4590.jpeg
    IMG_4590.jpeg
    821.4 KB · Views: 282
  • IMG_4588.jpeg
    IMG_4588.jpeg
    763.5 KB · Views: 268
Last edited:
  • Like
Reactions: TimothyR734
borp99 said:
It’s frustrating to see new members come on to this forum and expect others to get BS running on their old Macs without apparently doing the hard yards first.

Most, if not all of their problems have been solved by others in the preceding 142 pages and 3.5k posts. Therefore, like me and hundreds of others, start from page 1 and take the time to skim through every page. Take notes; copy and paste sections relevant to your model and/or year and print them out; start to experiment with patches. Keep records of what you did and what worked and what didn’t. All of this expands your mind and knowledge!!! Use it or lose it.

I’ve probably reinstalled the 5 betas, as each was released, several times over and rebooted in and out of recovery on a USB installer stick more times than I remember - but you learn and hopefully retain a bit more each time in the process, incl. repetitive lines of code in the Terminal. I now have the latest BS beta screaming along on my 2010 Mac Pro, with everything I need working and appreciate everyone else for helping me get there.

So, for those finding this forum for the first time or only intermittently, please put in the work before filling up the forum with IMO often unnecessary requests.
Click to expand...

The bad news is, yours is one of 3550+ posts, do you think they come along this post first. 😉

This is MR, lots of friendly people, plenty of them help others, not a bad thing if you ask me.

Even I, which has been on OS X/macOS since the very first beta, ask questions here, and helped lots of others, so to me, that's a good thing.
 
Last edited:
  • Like
Reactions: MacHacJac, TimothyR734 and thatsmeonlyme
is there any way to run the patch on an existing installed version (Big sur Dp 5) , i already installed Big Sur DP5 (wifi , airdrop , handoff not working )

LuisN said:
I ran the unpatch.sh in 0.0.19 using the usb installer I already had with 0.1.0 after that I repatched it with micropatcher.sh, rebooted to the usb installer, ran the setvar script and then the kext script without rebooting between them. Reboot and, hopefully, all will be working

Before:
View attachment 947035

After:
View attachment 947036
Click to expand...
 
  • Like
Reactions: Alex-Microsmeta
thatsmeonlyme said:
As I promised I attach an installation guide for a working installation of DP5 or PB 2 on Mid 2012 MacBook Pro machines. For my initial situation coming from DP4 installation using Barry K. N´s micro patcher V 0.0.1 booted into USB recovery I had to reboot after applying the set-vars command and had to apply it a second one. Then the installer worked.

You will use the installation guide to your own risk although I hope to have it made right
Click to expand...
What is that link (A virus.. 😉 Just kidding), it crashes Safari?....No kidding, I tried again and it again crashes Safari.
Safari has been buggy, can't recall it has been this bad.

So, I can't download that file in Safari, let's see if another browser will.
Another browser did the job, so, Safari can't handle the file.
 
LuisN said:
I ran the unpatch.sh in 0.0.19 using the usb installer I already had with 0.1.0 after that I repatched it with micropatcher.sh, rebooted to the usb installer, ran the setvar script and then the kext script without rebooting between them. Reboot and, hopefully, all will be working

Before:
View attachment 947035

After:
View attachment 947036
Click to expand...

LuisN thank you for the idea! Did just that and worked. The only snagg was that I tryed after unpatching and repatching, to run the vars.sh and then the kexts.sh but the second did not take! Told me it can't find my volume! So I rebooted and ran the kexts.sh from the terminal in the OS. Worked! Rebooted and it worked! So thank you very, very much!

Still, many thanks to @Barry K. Nathan for all his patches 😉
 
  • Like
Reactions: Barry K. Nathan, TimothyR734, justperry and 5 others
You must log in or register to reply here.
Register on MacRumors! This sidebar will go away, and you'll see fewer ads.
Top Bottom
Back