A separate drive for Beta is good advice, one reason I chose the Mini7,1 is the ability to easily add a NVM-e 1TB SSD drive for Beta to augment the 1TB SATA drive for releases. 😎
Got a tip for us?
Let us know
Become a MacRumors Supporter for $50/year with no ads, ability to filter front page stories, and private forums.
macOS 14 Sonoma on Unsupported Macs Thread
- Thread starter dhinakg
- WikiPost WikiPost
- Start date
- Sort by reaction score
- Status
Thank you,
i thought someone could point me to the right answer. It’s hard to read through 183 pages and maybe not find the right answer
There are no Cliff Notes for OCLP, a USB will be required, 32GB is recommended for Sonoma. D/L and install the release version of OCLP, start there, read this: https://dortania.github.io/OpenCore-Legacy-Patcher/
Last edited:
Hi to veryone,
I have installed Sonoma 14.2.1 on my iMac 11,1 with the Graphic Card Kepler Nvidia K3000M, all work fine only the camera built in showes the image with a green filter. How can I resolve it? if I disable hardware accelerator it work fine. Thanks!
PS. Can I disable Hardware Accelartor only for camera built in?
Best Regards!
I have installed Sonoma 14.2.1 on my iMac 11,1 with the Graphic Card Kepler Nvidia K3000M, all work fine only the camera built in showes the image with a green filter. How can I resolve it? if I disable hardware accelerator it work fine. Thanks!
PS. Can I disable Hardware Accelartor only for camera built in?
Best Regards!
Last edited:
Just looked at the problems you describe in #4,523 . I'm on a MBP11,1, Intel Iris 1536MB, 14.3b2, OCLP 1.4.0n from Jan 1st.
- clicking Memories (I guess it is "Rückblicke" in my German version) does crash. I use it almost never and didn't notice before. Sometimes I got notifications "neuer Rückblick" and these seemed to work OK. Crash log attached.
- Portrait pics - not sure if I look at the right place. "Personen" in German I guess, but then I don't know what Edit button. I can look further with some advice.
Photos otherwise works just fine for what I do with it.
Last edited:
Thank you, I started there, I read this. I just thought that somebody figured out a way to do it without an external USB. So it seems it’s not possible.
I have been using Bootcamp since macOS Catalina, I never had to touch this partition, at the time I was using Windows 10, the only time I redid the procedure was when I was on Big Sur, to install Windows 11 through Bootcamp, it goes up in BIOS Legacy on Air 2012 , and whenever I needed to reinstall Monterey, Ventura, Sonoma, I only change the macOS partition, I never change the Windows partition, I only use OCLP to upload macOS, as Windows 11 starts directly without OCLP.
We have the same effect here on our office cMPs. It can be solved by running/starting facetime app in parallel to i.e. Teams or other video conf software.
Yes it is possible to install everything without any usb Drive
macOS 12 Monterey on Unsupported Macs Thread
AWESOME, thank you so much, i am replying from my MacBookPro9,2 running Sonoma 14.2.1.
forums.macrumors.com
Ex power user here, now retired but still doing some dev stuff for fun, friends and family which means I am still doing various forms of multi-boot on a number of computers, which in turn means I need a streamlined way for this and OCLP is it at this moment in time so I want Win and flavors of Linux also under OCLP. The factory Bootcamp process is not reliable in my experience with OCLP anymore but the WIN UEFI process that the Dortania folks have outlined for dual boot MacOS-Win10/11 works quite well in combination with their multi-boot instructions but I do tend to to have issues sometimes with some Macs being confused about GUID/MBR status which I have never been able to figure out. Windows sometimes opens the wrong Windows installer screen on rMBP 10,1 for example. If someone has a bullet-proof method for multiboot under OCLP/Sonoma/WIN/Linux multiboot I am all ears.
Last edited:
The USB drive may be an usbstick, an usb harddrive or an usb ssddrive.
Maybe we're using different terminology. Regardless, the original statement "Having High Sierra and OCLP on the same disk has never been recommended." is incorrect. See here.
I don't want to hijack this thread but have a quick question. I set up OCLP on my friend's 12,1 A1502 in late summer---Somehow he updated it and it won't get past the log in screen. I believe he's on 1.0.1 OCLP and 14.2? I tried "safe mode" but it doesn't boot up. I want to create a bootable USB on our lunch break but we don't have Mac to do so only PCs---is there a way to create an installer any other way so I can get him on 1.3.0
This is not a solution. From the facetime app, the camera is increased by 1.5 times.
Replying to myself to provide a solution, albeit weird, if other users search this thread.
So after all of the above stuff, this is what I did:
1. Repeated steps 1-5 from above.
2. Booted the macOS 14.2.1 USB
3. Installed macOS 14.2.1 right over the top of my macOS 14.2 installation
4. Upon reboot, somehow, the system had a functional GPU, wifi, and camera! What!
So, yeah, this MBA 6,2 is up on 14.2.1 with working acceleration and everything. I do not know how or why the root patches got applied, but I sure see them in /Library/Extensions/. Weird! I'm not going to look a gift horse in the mouth though, and I'm elated my MacBook is back up and fully functioning. This MBA 6,2 is my daily driver. It was killing me having it down!
This has been posted from the aforementioned MacBook Air.
Just to add that Photos Memories:
- on MBP11,1 crashes also with 14.2.1 / OCLP 1.3.0
- on MBP5,2 (Nvidia Tesla 9400M) works, tried with 14.3b1 /OCLP 1.3.0.
Memories works on imac 13,1 OCLP 1.3.0 on 14.2.1
Macbook Pro 11,4 works " "
Hello to all,
iMac 13,2:
Installed 14.3 beta 2 OTA using OCLP 1.4.0 nightly. Some items are occasionally missing from right side of the menu bar, and desktop items sometimes "disappear" after other application's windows cover the desktop.
The right side menu bar items can be restored (as reported by others) via "killall dock" command executed in terminal, while desktop items can be restored via Finder "force quit" command.
Otherwise 14.3 beta2 functuions well.
MacBook Pro 5,2 (Non-Metal, 2009)
OTA installation of 14.3 beta2 failed in last stages of the process. Rebooting in "safe mode" allowed to proceed to desktop, login into MacBook Pro and verify that 14.3 beta2 was actually installed. Process was glacially slow and ultimately I was unable to authenticate OCLP to install patches. Booted into Ventura and applied latest patches (OCLP 1.4.0n), but rebooting back into Sonoma installation failed at about 1/4 of the progress-bar's length. Waited until 14.3.b2 installer was available for download via OCLP, then used "Create macOS installer" function to build a full installer on USB thumb drive. Thereafter installation proceeded through several reboots, but 14.3 beta2 did fully install and is functional within hardware’s capabilities. Bluetooth 4.1 Dongle plugged into USB port of MacBook Pro 5,2 allows for pairing, and some level of continuity, and while Airdrop recognizes devices within range, and displays their icons in the airdrop window, reverse is not true; MacBook Pro is neither recognized nor listed by AirDrop services of other computers.
Bluetooth File Explorer works correctly when Bluetooth Sharing is activated on accessed computer and MAcBook Pro.
Photos Memories do crash when selecting a "memory" while "portraits(?)" (in Photos->People) work without isuuses under 14.3 beta2
Hope this data may be of help.
iMac 13,2:
Installed 14.3 beta 2 OTA using OCLP 1.4.0 nightly. Some items are occasionally missing from right side of the menu bar, and desktop items sometimes "disappear" after other application's windows cover the desktop.
The right side menu bar items can be restored (as reported by others) via "killall dock" command executed in terminal, while desktop items can be restored via Finder "force quit" command.
Otherwise 14.3 beta2 functuions well.
MacBook Pro 5,2 (Non-Metal, 2009)
OTA installation of 14.3 beta2 failed in last stages of the process. Rebooting in "safe mode" allowed to proceed to desktop, login into MacBook Pro and verify that 14.3 beta2 was actually installed. Process was glacially slow and ultimately I was unable to authenticate OCLP to install patches. Booted into Ventura and applied latest patches (OCLP 1.4.0n), but rebooting back into Sonoma installation failed at about 1/4 of the progress-bar's length. Waited until 14.3.b2 installer was available for download via OCLP, then used "Create macOS installer" function to build a full installer on USB thumb drive. Thereafter installation proceeded through several reboots, but 14.3 beta2 did fully install and is functional within hardware’s capabilities. Bluetooth 4.1 Dongle plugged into USB port of MacBook Pro 5,2 allows for pairing, and some level of continuity, and while Airdrop recognizes devices within range, and displays their icons in the airdrop window, reverse is not true; MacBook Pro is neither recognized nor listed by AirDrop services of other computers.
Bluetooth File Explorer works correctly when Bluetooth Sharing is activated on accessed computer and MAcBook Pro.
Photos Memories do crash when selecting a "memory" while "portraits(?)" (in Photos->People) work without isuuses under 14.3 beta2
Hope this data may be of help.
Last edited:
I did search for this issue and found your posts! But that was right before you posted this final follow-up
I had the same symptoms, 14.2 boot failing halfway through and safe mode not being accessible, albeit on a 5,2 MBA. Multiple attempts, always the same hang up.With your post from before, I concluded that maybe troubleshooting this would take too much effort. Thus, I booted up network recovery with the intention of wiping it clean and install the latest officially supported OS.
I left it downloading the package but instead of returning to a screen with the installation wizard it had simply rebooted back into Sonoma. And it had succeeded without hanging! Weird!
I have since rebooted a couple times, all successful, but I also took the opportunity to install 14.2.1 immediately so I can't for sure say if network recovery affected something or if it just was a fluke.
Why OCLP and High Sierra should not be the same disk - OCLP can install a macOS to that disk which installs an APFS version which can be corrupted over time by the APFS installed by High Sierra.
Hello RogueB,
thank you. Also my MBP5,2, which is very similar to yours, works as expected with 14.3b2 / 1.4.0n.
This time the OTA update over 14.3b1 (which was installed from USB installer) worked well.
My impression is that an OTA on top of a previous OTA may not work reliably on such MBPs.
USB installer is certainly more robust.
For daily work my newer MBP11,1 is fine, MBP5,2 not anymore, also because of the problem in its charging circuit. But whenever I use the MBP5,2 again I feel the big difference between 13 and 17 inches... if I really need a new machine one day, it will be a modern 15 or 16 inch one.