Smoke with iPhone 6 Gold (Video Tour) will match well.
Another advantage of smoke is that scratches or dust trap inside wont be so obvious.
Last edited:
Got a tip for us?
Let us know
Become a MacRumors Supporter for $50/year with no ads, ability to filter front page stories, and private forums.
PowerSupport iPhone 6 & Plus cases
- Thread starter Bako-MacAddict
- Start date
- Sort by reaction score
Smoke with iPhone 6 Gold (Video Tour) will match well.
Another advantage of smoke is that scratches or dust trap inside wont be so obvious.
If the Air Jacket Rubber Black looks weird with iPhone 6 Space Gray based on picture and comment posted here.
Is the Air Jacket Smoke (versus Clear and Clear Matte) the best color for iPhone 6 Space Gray?
Is the Air Jacket Smoke (versus Clear and Clear Matte) the best color for iPhone 6 Space Gray?
I don't think it looks weird. I'm not a fan of the space grey color since it looks silver to me... but it goes well with the black air jacket. I'm more disappointed that there isn't a black iPhone... but not it looks fine in person. However, If black wasn't an option, I would probably chose smoke just to darken the space grey.
I picked ordered two cases . Clear matte and the black one . Both look great on my space gray , but if I had to pick one , the black one looks the best . The phone looks all blacked out , so sick !! I'll post pictures when I'm home .
Ah... It seems like a massive QC Problem... Mine creaks like hell and I'm not that OCD... But it bothers me.
Worst, the case isn't exactly cheap.... I expected so much better..
However I am wondering if the creaking problem is only with the clear matt?
Seems like some others with the smoke grey or black don't experience this issue...
Got my replacement clear matte case for my 6 plus and it doesn't creak on the bottom sides anymore!
Did you email support@powersupport?
I did that about 5 days ago and got a reply from Graham, who asked for my address and said a replacement case would be sent to me.
However I have yet to hear from him if my replacement case has been shipped out or not?
Did you get a reply from him after providing your address or did they just shipped it to you without notice?
I am located in Singapore, and actually purchased my case from Epicentre. However it is stated in the receipt that goods sold are not exchangeable or refunded.... So I just tried my luck emailing powersupport direct.
Really hope I can get my case replaced as it's not exactly cheap.
I emailed support@powersupport.com about my issue and got a reply on the 13th from Graham that he would get a replacement out ASAP. I just provided my order number in my initial email so he didn't have to ask for my mailing address.
It's funny cause I sent him an email this morning asking when the case would be shipped because I haven't heard anything from him since the 13th. Then I got a little package this morning from PowerSupport with my replacement case.
----------
Ask for the replacement. The time it takes to send an email to them is worth it alone.
Got my clear matte case today. SOOOOOOO hot! Tight fitting all around, I don't know if I'm getting lucky or just not as picky as some, but the case is very very nice. I had the Apple silicone case before. Also, for those who say its hard to take off, if you follow the instructions, its so easy! Anyway, those who haven't gotten theirs yet, its worth the wait... I promise.
Okay! I see, I just checked and got my email from him on the 15th. I replied him on the same day and haven't heard from him since, so my guess is that my replacement case is on the way!
Probably will get it next tues or weds next week.
I did not purchase from the Powersupport website direct but instead from a authorised overseas retailer.
I just want to check with you, how does your replacement case fit? The Iphone is suppose to fit completely snug in the air jacket yeah? Squeezing the case should not allow any movement at all from any of the four sides correct?
Just want to be sure that this is the case when I recieve my replacement air jacket.
Thank you for letting me know
Okay! I see, I just checked and got my email from him on the 15th. I replied him on the same day and haven't heard from him since, so my guess is that my replacement case is on the way!
Probably will get it next tues or weds next week.
I did not purchase from the Powersupport website direct but instead from a authorised overseas retailer.
I just want to check with you, how does your replacement case fit? The Iphone is suppose to fit completely snug in the air jacket yeah? Squeezing the case should not allow any movement at all from any of the four sides correct?
Just want to be sure that this is the case when I recieve my replacement air jacket.
Thank you for letting me know
It's definitely a lot better than my first case cause it was creaking pretty bad at the bottom. It bothered me since I grip my phone at the bottom for one hand use and I would always feel the flex/creaking.
As for my replacement case, it's pretty snug and I don't feel it at all anymore. But if I'm really looking for a flex/creak, then it's there but near the power button instead and isn't as prominent as my first case. Overall, I'm pretty happy with it.
Same here - I was sent a case for the 6 instead of 6 Plus. On Monday Graham said a new one would be sent right away, but I have yet to hear any more, or get a tracking number, even after emailing again to find out what the status is.
Thanks for your feedback.
I really do hope I will get my replacement case asap and fingers crossed no creaking or moving whatsoever.
I reckon the smooth edges of the new iPhones probably make it a lot more difficult for case making companies to actually produce a case which "grips" or hugs the sides properly.
----------
Sorry to hear that, but I guess we can only wait for our replacement cases to arrive.
I too did not receive a response from Graham after his first email and needless to say, no tracking details whatsoever.
Hoping that mine would arrive next week. ###
I haven't had a problem with "scratches" . Yes , at first it is difficult to remove the case, you just have to find the technique to do it . Now I can remove the case with no troubles .
great!
i email power support on the 15 oct too. was told by Graham that he will send me replacement. but nv heard from him since then, no tracking number, nth.
i did not give him my address nor the order no.
lol.
hope that he really had send me the replacement. long wait!
So did the guy saying it scratched his phone ever provide pics?
I'm not really liking how the space grey shows through the cut outs on the rubber black. Glad I went with the clear matte (and no I don't have any creaking issues to speak of).
I'm not really liking how the space grey shows through the cut outs on the rubber black. Glad I went with the clear matte (and no I don't have any creaking issues to speak of).
I guess it's a few unlucky clear matt cases which have failed QC.
I have taken mine out numerous times but zero scratches.
Followed the instructions provided and case comes out like silk.