Sidebar Sidebar
Become a MacRumors Supporter for $50/year with no ads, ability to filter front page stories, and private forums.

6S/6s+ glass protector discussion [Merged]

I have a Daswise which installed perfectly on 6S+. it's a perfect fit with the spigen slim armor.
 
My one complaint about the Daswise is that dust easily gets under the three clear 'holes'. There are gaps from above and via the speaker hole that just make it too easy for dust to get in there.

OneMike said:
I have a Daswise which installed perfectly on 6S+. it's a perfect fit with the spigen slim armor.
Click to expand...
 
Paco II said:
My one complaint about the Daswise is that dust easily gets under the three clear 'holes'. There are gaps from above and via the speaker hole that just make it too easy for dust to get in there.
Click to expand...

I didn't have that issue. I don't doubt you though. There were mixed reviews. For some the adhesive didn't seem to stick fully. Others as with me it seemed pretty perfect.
 
I wonder if the 6s+ has a different design. See the circled part in the photo, there is no adhesive in that spot all the way to the two sensor 'holes', which allows dust to easily get under.

995d9e7d421e93963a8de954ac524a78.jpg



OneMike said:
I didn't have that issue. I don't doubt you though. There were mixed reviews. For some the adhesive didn't seem to stick fully. Others as with me it seemed pretty perfect.
Click to expand...
 
Paco II said:
I wonder if the 6s+ has a different design. See the circled part in the photo, there is no adhesive in that spot all the way to the two sensor 'holes', which allows dust to easily get under.
Click to expand...

Wow, it's definitely not like that. Every part of the screen has adhesive. Not sure what warranty is or how long ago you purchased, but I'd contact them and see what they have to say.
 
Did. Apparently it is how it is supposed to be. I've purchased three for different phones and all like this.

OneMike said:
Wow, it's definitely not like that. Every part of the screen has adhesive. Not sure what warranty is or how long ago you purchased, but I'd contact them and see what they have to say.
Click to expand...
 
How do the Daswise and the Ice Max compare? Anyone know?

I just broke my Daswise and am wondering if I should just replace it with the same thing or try a different one.
 
I just got the ICE MAX 3D GlASS from G.D.Smith and i am very disappointed - I've installed it on my 2 iPhone 6S and i have lots of bubbles that seems that they not planing to vanish from the screen

3vsew.jpg
 
The Ice Max can be a royal PITA to install. Keep trying with the bubbles, and with enough elbow grease they'll go away 99 percent of the time. This particular S/P is a real pain but once it's on is pretty sweet.
 
  • Like
Reactions: awmstone
Anyone have experience with non-E2E 0.15mm glass screen protectors? Seems to be a lot of good reviews on the two below, but since everyone is paying for reviews nowadays it's hard to tell. The negative ones are all about chipping easily, which is what I fear since they are so thin.

http://www.amazon.com/dp/B01ALDC38M/ref=cm_sw_r_tw_dp_RLmpxb135NWCH
http://www.amazon.com/dp/B01D7HK0BG/ref=cm_sw_r_tw_dp_dMmpxb1F0RD64

There's also this E2E one that seems promising:

http://www.amazon.com/dp/B01CZVYQR4/ref=cm_sw_r_tw_dp_KKmpxb1Z5WG5H

My problem is I hate screen protectors, but I *really hate* fingerprints and wouldn't mind some scratch protection. I also think the non-E2E anti-glare options are really ugly since they cut up the all-black face on my SG iPhone. At least glass or crystal films are a bit more seamless.

Can anyone help my eternal struggle with screen protectors? :rolleyes:
 
As an Amazon Associate, MacRumors earns a commission from qualifying purchases made through links in this post.
If anyone could help with this. I have a perfectly installed godosmith ice max 3d on my iphone 6. I put it into my pocket and it scratched from my jeans somehow. The scratch is not deep. Does anyone know if there is a known version (some kind of rubbing the surface) to get rid of it?
 
As an Amazon Associate, MacRumors earns a commission from qualifying purchases made through links in this post.
db0227 said:
Anyone have experience with non-E2E 0.15mm glass screen protectors? Seems to be a lot of good reviews on the two below, but since everyone is paying for reviews nowadays it's hard to tell. The negative ones are all about chipping easily, which is what I fear since they are so thin.

http://www.amazon.com/dp/B01ALDC38M/ref=cm_sw_r_tw_dp_RLmpxb135NWCH
http://www.amazon.com/dp/B01D7HK0BG/ref=cm_sw_r_tw_dp_dMmpxb1F0RD64

There's also this E2E one that seems promising:

http://www.amazon.com/dp/B01CZVYQR4/ref=cm_sw_r_tw_dp_KKmpxb1Z5WG5H

My problem is I hate screen protectors, but I *really hate* fingerprints and wouldn't mind some scratch protection. I also think the non-E2E anti-glare options are really ugly since they cut up the all-black face on my SG iPhone. At least glass or crystal films are a bit more seamless.

Can anyone help my eternal struggle with screen protectors? :rolleyes:
Click to expand...

I just ordered one of these to give it a try, i'll let you know when it arrives
 
As an Amazon Associate, MacRumors earns a commission from qualifying purchases made through links in this post.
As an Amazon Associate, MacRumors earns a commission from qualifying purchases made through links in this post.
cybertek said:
The only minor issues is a slight distortion on the left edge. Also there is no hole for the front facing camera.
Pic bellow.
Click to expand...

By distortion do you mean a slight halo where the screen protector lifts slightly from the rounded edge of the phone screen?

I prefer no front facing camera hole. Less dust to collect.

Now I'm curious about the durability to scratches and the coating.
 
rstark18 said:
By distortion do you mean a slight halo where the screen protector lifts slightly from the rounded edge of the phone screen?

I prefer no front facing camera hole. Less dust to collect.

Now I'm curious about the durability to scratches and the coating.
Click to expand...


Time will tell with durability. So far I like it. It is very thin and hardly noticable. I previously had the Belkin that they install at the Apple store and it was much thicker and had sharper edges.

image.jpeg
 
cybertek said:
Installed the SP on Sunday. The install guide worked very well and the SP is lined up, bubble and dust free. The edges appear to be rounded nicely with no sharp edges. The only minor issues is a slight distortion on the left edge. Also there is no hole for the front facing camera.
Pic bellow.

View attachment 633702
Click to expand...

I installed mine on Saturday, what a great screen protector! Insanely thin and smooth glass. I will post pictures later today, but it is incredibly nice. The install device included with the kit was a nice touch, it allowed me to perfectly install perfectly aligned.
 
  • Like
Reactions: awmstone
snsking said:
I installed mine on Saturday, what a great screen protector! Insanely thin and smooth glass. I will post pictures later today, but it is incredibly nice. The install device included with the kit was a nice touch, it allowed me to perfectly install perfectly aligned.
Click to expand...

You got the same one as @cybertek? And forgive me if I missed this, but are these on iPhone 6s or 6s+?

TIA!
 
As an Amazon Associate, MacRumors earns a commission from qualifying purchases made through links in this post.
  • Like
Reactions: awmstone
Has anyone found edge to edge glass protector that actually has adhesive along the sides and not just the common top and bottom?
 
djkokalis said:
If anyone could help with this. I have a perfectly installed godosmith ice max 3d on my iphone 6. I put it into my pocket and it scratched from my jeans somehow. The scratch is not deep. Does anyone know if there is a known version (some kind of rubbing the surface) to get rid of it?
Click to expand...
watch out for that pocket lint that could possibly be carrying fine debris
 
You must log in or register to reply here.
Register on MacRumors! This sidebar will go away, and you'll see fewer ads.
Top Bottom
Back