Become a MacRumors Supporter for $50/year with no ads, ability to filter front page stories, and private forums.
I was excited that ATT would roll it out like TMO did, so I could dump my home phone line. If they do it like people have described, looks like I can't do that. :-(

You can forcibly do WiFi calling easily enough though there's no guarantee it'll work until the feature has a more widespread official release but Airplane mode is a nice easy way to forcibly workaround the behavior as it is currently outlined
 
Assuming iPhone even works as a "GoPhone" it should work in theory you just may need to forcibly activate it

Why would an iPhone not work on GoPhone? I've been using it for years - $54/mo flat via callingmart for unlimited crap / tethering / 4GB of rollover data. AT&T's postpaid plans don't come close, especially after the typical outrageous postpaid taxes and fees. No laggy high latency proxy like Cricket or Straight Talk forces on you, either.

I'm also very curious if anyone has gotten it to work yet. I know the VoLTE option recently started being provisioned, but my area doesn't have it allowed yet so I'm not sure if it actually works or not.
 
Why would an iPhone not work on GoPhone? I've been using it for years - $54/mo flat via callingmart for unlimited crap / tethering / 4GB of rollover data. AT&T's postpaid plans don't come close, especially after the typical outrageous postpaid taxes and fees. No laggy high latency proxy like Cricket or Straight Talk forces on you, either.

I'm also very curious if anyone has gotten it to work yet. I know the VoLTE option recently started being provisioned, but my area doesn't have it allowed yet so I'm not sure if it actually works or not.


For quite some time various carriers I've approached on the matter of prepaid tried to claim iPhone either won't work or is unlikely to work to its fullest on PrePaid so I'm basing it on what employees have tried to interpret to me.


And to clarify for you before anyone asks I'm similar to the guy in here saying he has 2 cariers


I'm with both AT&T and T-Mobile presently 1 work 1 personal

To defend AT&T Post Pay I'm on a Promo 30GB plan locked in w/RO UL Talk+Text etc. plus wider call/text coverage

For just under 3X your bill but getting 5x more at least. It's the installments on my iPhone 6 Plus that kills the bill more...


Anyway skewing off topic slightly

Don't get me started on Cricket

As for getting it to work I see no reason you couldn't get it to work I got WiFi working on my AT&T device but had to forcibly trick it into enabling and although being PostPaid I'd imagine GoPhone could too. Worst case scenario it doesn't work or Go Phone customers will need to wait for wider or official non beta rollout
 
I used to have the same problem. However, the MicroCell has a setting to disable this handoff. I know, it would have been helpful to know that earlier. Better late than never. Once I disabled the setting, it's been better ever since.

Please elaborate on how to do this.
 
I haven't seen anything official to indicate that this is the case. Speculation is running rampant and no one really knows.

The only thing I've seen remotely close to this is the "Wi-Fi Assist" feature in the latest iOS 9 beta that will automatically switch the call over to cellular if Wi-Fi connectivity is poor. The way I read that, as long as Wi-Fi calling is enabled and your Wi-Fi connection doesn't suck, the phone will default to using Wi-Fi calling. If your Wi-Fi connection sucks, the phone will fall back to the cellular network. If that is indeed how it will work, I think that's a pretty good implementation, personally.

Will the wifi calling feature use ANY hotspot available once the feature is enabled? Even if it's a public, unencrypted network?
 
Because I want to use the WiFi for my home phone. With my TMO phone, it defaults to use wifi.... which is preferred... connects quicker, call quality is clearer and more reliable.

With AT&T, it seems they're using it only if the network isn't good enough.. which is not what I want.

What if you are out and about? Does it constantly switch from all the available public wifi to cellular and back again?
 
Could you tell me which city you're in? I'd like to try and see if I can trick it into letting me turn it on. ;)


I would imagine you could trick or at least try tricking it! Worst case scenario it doesn't work.


Tricking it just involves a few EZ steps that are zero risk
 
WIFI Calling will only work in areas where AT&T has HD Voice Support.

I am in Hartford, CT and I have not heard any plans to offer HD Voice here, so doubtful we will get WIFI calling until AT&T rolls out HD Voice here.

That sucks. HD voice isn't available in my area either. BTW, does the 5S support HD calling?
 
Obviously this is still very "beta" as a whole, but I could see it as a way to get rid of the Microcell my dad uses if it works on the 5S. In my tests where I live, wifi calling kicks on almost immediately when I flip on airplane mode and then turn back on wifi (simulating a poor cellular signal) - I'll test more tomorrow, but it does seem to work instantaneously. You can't specify what networks to use it on, but it seems like AT&T's implementation on the iPhone is always a backup when cell service is poor, so if you connect to a lousy public wifi hotspot, you won't miss calls.

So if wifi calling is switched on, the phone will use that wifi network for data too? Even if it's an unencrypted hot spot?
 
Will the wifi calling feature use ANY hotspot available once the feature is enabled? Even if it's a public, unencrypted network?


Remains to be seen as of yet
( though I've not read ALL The experiences posted on here or other sites yet nor tested WiFi calling anywhere but home. Will likely test other hotspots later this week )
 
Is there any indication on the phone that you're using Wi-Fi calling? Does it say "Wi-Fi" where it normally says AT&T or anything like that?


In similar fashion to the network banner changing when roaming, of net or switching between 3G, 4G, LTE, 4G LTE, Edge or connection to M-Cell ( Microcell )

A banner does display "AT&T Wi-Fi"
 
No HD Support is 6 6+ ONLY
Probably will be on ALL New models going forward though wouldn't make sense not to be

Damn. Oh well...

Remains to be seen as of yet
( though I've not read ALL The experiences posted on here or other sites yet nor tested WiFi calling anywhere but home. Will likely test other hotspots later this week )

Looking forward to hearing your answer!

There are online tools if your MCell has actually been fully properly registered

You can use the "Manage Microcell" option on the AT&T Website

Via the MyAT&T App

Or via the Microcell Manager App

I have tried that in the past. but there was something about the handoff that I didn't like. I will check again. Maybe it's been updated.

Yes because obviously using Data over WiFi is a longtime default pretty much since WiFi became a thing

Any idea as to if the data and voice over wifi is encrypted? I would not use an unencrypted wifi connection for anything except an emergency.
 
Any info as to how security is handled when wifi calling is switched on? For example: What if you are on an unencrypted network? I asked this above, but want to break it out into a separate question too.
 
So then how does T-Mobile do it? They were offering WiFi calling everywhere long before they had widespread LTE coverage.


Different more mediocre rudimentary form of tech and process for T-Mobile and not in HD


The way I'd best liken it is a modified version of Skype but tied to a provider who is solely relying on WiFi around and piggybacking at least in the very early days of T-Mo WiFi calling.....
 
Will the wifi calling feature use ANY hotspot available once the feature is enabled? Even if it's a public, unencrypted network?

Encryption is kind of a wee bit useless if you're having a voice conversation on a public hotspot, so I can't see why it wouldn't use any available/connected network.
 
Damn. Oh well...



Looking forward to hearing your answer!



I have tried that in the past. but there was something about the handoff that I didn't like. I will check again. Maybe it's been updated.



Any idea as to if the data and voice over wifi is encrypted? I would not use an unencrypted wifi connection for anything except an emergency.


I'll check back in with my findings on the Network selection/use/compatibility etc using WiFi assuming I can maintain or toggle on/off the WiFi successfully at will

Had to trick/force my WiFi sign up/activation under the AT&T Beta


For MCell they've made a lot of changes behind the scenes and Tweaks so hard to say where the options are now but they should exist. Worst case scenario put in a free call to AT&T Customer Care if you haven't done so yet then ask for Tech Support


No clue if the Data is encrypted I'll look into to that as I'm curious myself I'd imagine so or at least hope so
 
  • Like
Reactions: DCIFRTHS
Encryption is kind of a wee bit useless if you're having a voice conversation on a public hotspot, so I can't see why it wouldn't use any available/connected network.

The point is: I don't want to have a conversation on an unencrypted "airborne" network much less transmit any data.
 
Nearly 24 Hours and 30ish WiFi calls in on my part -

Intitial observations:

1: So far AT&T WiFi calling seems pretty good and reliable

2: The handoff from my initial small sample seems as iffy as Microcell to Base Network ( only put handoff to the test 7 calls of 32 ) calls do seem capable of handoff to some extent


3 - Call quality seems proportional to and and bound in part by WiFi connection quality and quality of the ISP Network getting farther away from the WiFi signal or being by a router having issues or latching onto a risqué network seems not entirely surprisingly to yield undesirable negative impact to call quality


( again only had time for a small sample pool so far )


4: AT&T May have a very low signal threshold for the auto switch to WiFi or possibly compatibility or spottyness issues due to being early on Beta. So far this morning I conducted a few tests in nearby neighborhoods in known "low signal areas" and even known "dead zones"


At points where WiFi was available and NOT A Locked PW protected network No service to 2 bars seem to still struggle to Auto Commect for WiFi call purposes



5: more for the OCD, Billing concious, super observant or curious whom have ANY Form of detailed billing or track usage online. The AT&T Billing systems ARE Already set up to some extent for WiFi calling. Upon browsing thru my usage intermittently a pretty solid pattern emerged.

Billing/usage observations thus far

WiFi Use does show.

Not only does it show it may be the most expedient usage I've seen literally EVERY WiFi call I made thus far has shown/reflected in my usage within an average of 20 to 80 minutes of ending the call.


Calls are coded with a special feature/usage code as expected sort of like 3 way call would be 3WC and CW would be Call Waiting. The code is an odd 1 but eh whatevs and in the cost section for now every call just like all of my included plan minutes/usage/services

The cost reads
$0.00

Initial verdict I'm digging this WiFi calling and look forward to using it/testing it a ton
 
  • Like
Reactions: DCIFRTHS
I guess this would be handy if users don't wanna use a VoIp provider, install an app, but still want the low cost.

I'm guessing its lower then voice..

i would actually often think, mobile carriers want to charge more,,,,, and if Wifi-calling is cheap, its the opposite with the default app.
 
Register on MacRumors! This sidebar will go away, and you'll see fewer ads.