iPhone 16 Pro/Pro Max Screen Protector

[ZipZap]

Magic John fits very well with as case. I think all protectors will have some sort of gap to be compatible with cases.

 

[Ravox]

How about the gap with ESR leaves a big gap between the protector and phone border? Can you post some pics?

 

[Brooke795]

So just came back from Apple Store. Bought 2 iPhone 16 Pros. 256GB & 512GB.
On 256GB one the protector fits perfectly. First attempt.
On 512GB one, 6 failed attempts, ESR and Tersely. Apple Store tried 2 Belkins, same issue. The whole border is not sitting right.
The lady at the store said to get a new iPhone and take the refund of this one.
They’ve actually been facing this issue with quite a few other customers too so the worst part is that I don’t even know if the new one will have the same issue or not.
Honestly kinda pissed. What’s up the QC at Apple? No Apple intelligence, now screen warp issue.

Screen protector not going down? That’s what happened to me. I had to swap my whole phone because my screen protectors wouldn’t lay down. Once I got the phone swapped the first screen protector went down immediately.

It’s strange some of these phones have this issue. It took me a few days to get everything right.

 

[Vct4]

Hi, i’ve been going insane for some time now looking for a good glass. Currently i’m using Armorite. Waiting for ultraglass and uniq optix clear to arrive. From what i’ve read I’ll likely return ultraglass. I’m curious about uniq, updated prism and future releases from flolab. Here is a photo of esr, how does it compare to belkin? (Just a heads up, mine has some defects in oleophobic coating but ymmv)

 

[Sal09]

ESR screen protectors are very poor this year especially the stock available on Amazon UK.

Installed, removed, binned.

Sticking with TORRAS for now.

 

[Ravox]

Hi, i’ve been going insane for some time now looking for a good glass. Currently i’m using Armorite. Waiting for ultraglass and uniq optix clear to arrive. From what i’ve read I’ll likely return ultraglass. I’m curious about uniq, updated prism and future releases from flolab. Here is a photo of esr, how does it compare to belkin? (Just a heads up, mine has some defects in oleophobic coating but ymmv)

Thanks for the pics looks esr has the same size gap as torras…… let me know your finds about this Ultraglas and Uniq …..Ultraglass look exactly like torras not sure if they will provide bigger coverage despite the listing tells they are 1:1 full coverage

 

[Pandyone]

Hi, i’ve been going insane for some time now looking for a good glass. Currently i’m using Armorite. Waiting for ultraglass and uniq optix clear to arrive. From what i’ve read I’ll likely return ultraglass. I’m curious about uniq, updated prism and future releases from flolab. Here is a photo of esr, how does it compare to belkin? (Just a heads up, mine has some defects in oleophobic coating but ymmv)

I prefer Nudient's screen protector. They have full protection that follows the screen and has rounded edges. No dust collecting around the edge and works good with cases.

 

[Sal09]

Magic John fits very well with as case. I think all protectors will have some sort of gap to be compatible with cases.

Please post some pics. i might grab one of these.

 

[kchen102]

Did they update the armorite?

No clue, I had a Torras before this one. I’m in the US and bought the Armorite one with the ultrafit tray.

 

[Vct4]

Just fyi, look at the side on the first picture. One with defects has reflections making bezels look smaller than they really are. Irl armorite extends just barley over active display.

 

[kchen102]

I prefer Nudient's screen protector. They have full protection that follows the screen and has rounded edges. No dust collecting around the edge and works good with cases.

The issue with Nudient and all other the ones likely coming out of the same factory (Ultraglass, Torras, WSKEN) is that the black border that’s used to give it a nicer edge to edge appearance also cuts into the actual pixels.

The non black borders don’t look as clean, but they extend past the pixels so no pixels are being blocked.

 

[danb1979]

Some close up photos of the edges and corners would be nice. Since most of us discussing gaps and sharp edges. Not so much dust and bubbles. Cheers

Pics as requested and also with it in a UAG case; zero issues and it's not sharp at all. Then again I never use my phone without a case

 

[Ravox]

It seems there is no solution for the gap this year no matter what brand you look for

 

[danb1979]

It seems there is no solution for the gap this year no matter what brand you look for

I've never seen a full edge to edge screen protector; then again they'd never work with cases would they

 

[Zensō]

It seems there is no solution for the gap this year no matter what brand you look for

In my experience, the size of the gap is determined by the case more so than the screen protector.

 

[Ravox]

I've never seen a full edge to edge screen protector; then again they'd never work with cases would they

I've seen some with less gap, for example last year torras on 15 Pro Max had less gap than this year...i think the change on screen sizes complicated things a little for screen protector manufacturers this year

 

[BadBrownBear]

Do you have a link for the 1 you bought?

I’ve been watching this thread for a while and finally purchased an ESR Armorite based on a person’s feedback here…

I can confirm that the ESR screen protector (the one with the Ultrafit tray) is pretty much 99% dead on with the Belkin screen protector pictures I see. It extends just a tiny bit past the bezels.

What’s funny is that the new ‘UltraFit’ tray that comes with the ESR kit is also pretty much 99% dead on with the Apple store Belkin screen protector installer…

$15 for 3 screen protectors is a killer deal compared to the UltraGlass 2, I would definitely recommend it if you’re looking for something similar to the UltraGlass 2 (AKA no black borders, and no bezel blockage)

 

[BadBrownBear]

TOCOL 2 Pack for iPhone 16 Pro Max Screen Protector 6.9-Inch [Instant Installation], 14FT Military Grade Shatterproof, 9H+ Hardness Tempered Glass HD Clear Full Coverage Protection No Bubbles No Dust

just for iPhone 16 Pro Max screen protector

www.amazon.co.uk

Just ordered this 1, will see how it fits

 

[thadoggfather]

What's with them being dust magnets this go round?

Ailun for my 13 mini is fine and attracts some but minor dust

Ailun (for 16Plus) and Amfilm (for 16Pro) both attracted a lot of dust after a day

Did they not round the edges enough, or is there something preventing them doing what they did with previous screen protectors?

Not the end of the world but a curious situation.

 

[KarimLeVallois]

https://www.amazon.co.uk/Milomdoi-Screen-Protector-Tempered-Accessories/dp/B0DB8M2W91/ref=sxin_15_pa_sp_search_thematic_sspa?content-id=amzn1.sym.6906c541-6eee-4c10-bc19-17299b9d5015:amzn1.sym.6906c541-6eee-4c10-bc19-17299b9d5015&crid=2Q701K0K8QL51&cv_ct_cx=iphone+16+pro+max+screen+protector&dib=eyJ2IjoiMSJ9.67K920ccVnU399X9lCECLgwjCJP-vJLgtQWq48C0oFeEq_edB3ZOvqnP49Mk0wP7AfQIU3lHc445Fwf2RwimvQ.b0o9dPx5ArJj4He4EFn4Dr6V8dmAgqa_qxOC1lUv0L0&dib_tag=se&keywords=iphone+16+pro+max+screen+protector&pd_rd_i=B0DB8M2W91&pd_rd_r=51c8a9e9-0a94-4de6-95f6-3b69cd2c95ad&pd_rd_w=cZmHF&pd_rd_wg=jXnLz&pf_rd_p=6906c541-6eee-4c10-bc19-17299b9d5015&pf_rd_r=96HJ9Y1ZH7GFTMFXHPC5&qid=1727882037&sbo=RZvfv//HxDF+O5021pAnSA==&sprefix=iphone+16+pro+max+scree,aps,92&sr=1-1-ad3222ed-9545-4dc8-8dd8-6b2cb5278509-spons&sp_csd=d2lkZ2V0TmFtZT1zcF9zZWFyY2hfdGhlbWF0aWM&th=1 Is the one I have and fits pretty well.

 

[toto4]

Hi, i’ve been going insane for some time now looking for a good glass. Currently i’m using Armorite. Waiting for ultraglass and uniq optix clear to arrive. From what i’ve read I’ll likely return ultraglass. I’m curious about uniq, updated prism and future releases from flolab. Here is a photo of esr, how does it compare to belkin? (Just a heads up, mine has some defects in oleophobic coating but ymmv)

This thing looks and fits exactly like my walmart corning glass for my 16 pro max

 

[Fred Zed]

Pics as requested and also with it in a UAG case; zero issues and it's not sharp at all. Then again I never use my phone without a case

View attachment 2431665View attachment 2431666View attachment 2431667View attachment 2431664View attachment 2431668View attachment 2431669View attachment 2431670

Much appreciated. Thank you.

 

[Fred Zed]

It seems there is no solution for the gap this year no matter what brand you look for

I think the edge is more pronounced when the edges aren’t tapered down. I think the tempered glass screen makers call it 2.5 or 3D edges.

 

[Fred Zed]

What's with them being dust magnets this go round?

Ailun for my 13 mini is fine and attracts some but minor dust

Ailun (for 16Plus) and Amfilm (for 16Pro) both attracted a lot of dust after a day

Did they not round the edges enough, or is there something preventing them doing what they did with previous screen protectors?

Not the end of the world but a curious situation.

Browski, you come across as a person that keeps one of these around for just this reason. Like me 🤣

 

[Fred Zed]

The highest grade quality wise screen protector I’ve ever used was by this manufacturer. Not sure if they make tempered glass anymore for the iPhone.

MOCOLL Global Website

MOCOLL: Global 3C Tech Hub. Premium phone cases, chargers, cables, smartwatch bands & wireless earphones. Curated quality, competitive pricing & fast worldwide shipping. 90-day warranty. Free global delivery. Upgrade your tech life with durable, stylish innovation.

www.mocoll.com