New question, will the 6/6+ charge faster with the 10w charger?
Yes.
New question, will the 6/6+ charge faster with the 10w charger?
Wasnt that basically answered in the article and/or replies so far?New question, will the 6/6+ charge faster with the 10w charger?
I'm not exactly clear on what you are questioning here or where exactly the conjecture is.
That's a bad choice of pictures to use. The one on the right isn't even a genuine iPad charger, meaning we have no idea if it's really just inefficient and wasting that extra energy it's consuming.
They really couldn't find one single iPad charger???
Isn't kenroberts83 talking about the discussion on how fast-charging can degrade a battery, and you were testing that fast-charging with an iPad charger will charge an iPhone quicker?
To me, it sounds like two different things. I've not read any PROOF that fast-charging degrades/destroys a battery over time. Like kenroberts83 said, all a bunch of conjecture and hearsay.
I connected my iPhone 6 to my MacBook Pro and looked at the System Report. It does request 2.1A according to that.
Just need someone to cut up a Lightning cable and hook up an ammeter in series to monitor the actual current sent to the iPhone. Any volunteers?
Seems like part of the issue there is that it hasn't been clear at all what those comments were wven aimed at, especially the initial ones. They were just generalizations about anything and everything in this thead basically.Isn't kenroberts83 talking about the discussion on how fast-charging can degrade a battery, and you were testing that fast-charging with an iPad charger will charge an iPhone quicker?
To me, it sounds like two different things. I've not read any PROOF that fast-charging degrades/destroys a battery over time. Like kenroberts83 said, all a bunch of conjecture and hearsay.
Its hardly anecdotal when I am on my 3rd battery in 3 years. The first one, using the right charger, lasted a good time. The second with a higher amperage a lot less and already I can tell the 3rd was/is going the same way. So much so that literally since last week I have been ensuring that I use the correct charger. There is a noticeable heat difference when charging between the two chargers. I have noticed a better all day lifetime since going back to the 1A charger. Though it is early days as it has only been circa a week.
I have charged our iPhone 3GS, 4, 4s, and 5 with our iPad chargers since we bought our first iPad (iPad2) and every one charges quicker. And every single one still works.
I am concerned using the more powerful iPad adapter might overload the iPhone battery and cause damage in the long term. Can someone confirm it's completely safe and wont damage the iPhone 6?
It is completely safe. The charge rate is determined by the PHONE not the charger. The phone will not request more than it can handle, and in the case of the iPhone 6, the battery never charges at anything but the normal 6w.
Wasnt that basically answered in the article and/or replies so far?
The article itself (even its title) covers it basically.Oh, my bad.
I missed the 5 times the 10w was mentioned in the 174 previous posts. You got me.![]()
don't be stupid, your iPad battery is designed for that specific amperage. The iPhone is not - ask yourself this. If it was good for the iPhone battery to take higher amps would Apple not give you a higher amp charger?
I mean:
1. They could standardise to a single charger for all products.
2. Happy customers because their phones charge super fast.
Common sense people!
Or, instead of destroying a cable, you can get one of these. It's what I use and goes in-line between the USB charger port and the device.
Smarter than cutting up a cable, eh?![]()
Here's my test with a Anker 20w dual port charger with a max of 2.4a per port. The only time I can get 12w is if the iPhone is below 50% and the screen on. With the screen off the phone charges at 11w. After 50% the phone starts to trickle down. Every time I tap the home button to check the percentage I notice that the killawatt jumps up 1.5w. I'm guessing the 12w everyone is getting is due to the screen being on causing the phone to draw more power. I just bought a 12w 2.4a apple iPad charger and will run the next test with it but most likely be the same. Here's my test with the anker from 5% to 100% checking every 15 mins and the displayed watt on my killawatt.
Start. 5% - 11w
0:15min 20% - 11w
0:30min 35% - 11w
0:45min 50% - 11w
1:00min 65% - 10w
1:15min 77% - 8.5w
1:30min 87% - 7w
1:45min 94% - 5w
2:00min 97% - 2w
2:15min 99% - 1w
2:35min 100% - 1w
Everything I check the percentage I also picked up the phone to feel any heat on the back of the phone. Throughout the whole test i felt no heat and the iPhone stayed cool as a cucumber.
This is with a 6+?
Yes with a 6+. I'll add that into my post. Thanks.