Same here. Re-installed ScanSnap Home but this didn't help. Did you find a workaround?
Got a tip for us?
Let us know
Become a MacRumors Supporter for $50/year with no ads, ability to filter front page stories, and private forums.
macOS 27 - working and non-working apps thread
- Thread starter DeanL
- WikiPost WikiPost
- Start date
- Sort by reaction score
- Status
Jakimo
macrumors 6502a
I've used these for years now, always.
I'm realizing with Golden Gate's menubar overflow tool that shows up next to the notch on my MBP natively, and the free space separator utility Spaced and the free spacing utility MenuBarSpacing.. many of us may have forgotten:
It can be managed pretty well without the utilities!
I don't think I'll need to go back really, after all..
flowrider
macrumors 604
Have you tried VueScan:
VueScan Scanner Software for macOS, Windows, and Linux
VueScan is the easiest way to get your scanner working on macOS, Windows and more. VueScan includes a driver for your scanner even though it isn't support anymore.
Lou
No - AFAIK VueScan doesn't support wifi and I don't want to hook up a cable just for some scans. Hope, this is "only" a bug in the beta; the ScanSnap folks were not the fastest ones to support new MacOS releases in the past...Have you tried VueScan:
VueScan Scanner Software for macOS, Windows, and Linux
VueScan is the easiest way to get your scanner working on macOS, Windows and more. VueScan includes a driver for your scanner even though it isn't support anymore.www.hamrick.com
Lou
colday
macrumors regular
This seems to happen with every new beta in the last several years! For this reason I will not be installing it on my primary computer. I’ve even seen it work for a dot version, then out again for the next. I also ended up purchasing and installing Viewscan to get me by.
Can anyone confirm that pearcleaner and similar apps along with their brew functionalities work well?
rcfa
macrumors newbie
Careful with Tailscale: worked perfectly as it was installed after the upgrade to macOS27 beta.
But it STOPPED working, when I let Tailscale install a new version of itself. Then the network extension wasn’t recognized. So I’d suggest disabling Tailscale (auto)updates, and just let the version continue to operate that works after you update the OS, until this is fixed. YMMV...
MakaniKai
macrumors 6502
Thank you for the warning. I'll go easy on the updates! Tailscale is a critical part of my daily work.
kyle007
macrumors member
Bambu Lab released an update for Bambu Studio and claims that they fixed the app for macOS 27. I haven’t tested it yet, though.
colday
macrumors regular
It doesn’t work for me, it keeps wanting to install the network plugin.
kyle007
macrumors member
Bummer. So we’ll have to wait for the actual network plugin update. That’s the only thing keeping me from updating to macOS 27.
Betamagic
macrumors regular
Logi Options+ doesn't work at my side with the macOS 27 beta. While detecting hardware the app restarts constantly, and takes away the focus of whatever has the focus. Have uninstalled it, waiting for a fixed version.
I have installed macOS 27 beta on an external drive, perhaps that makes it difficult for Options+... although it works without problems on external drives with older macOS versions.
Update: the problem seems to be connecting Logitech keyboards to a Mac mini M4, connecting Logitech mouses seems to work fine. I tried these four keyboards, and all of them resulted a constant restarting of Options+: MX Keys Mini, MX Keys for Mac, MX Mechanical Mini, and Logitech Craft.
I have installed macOS 27 beta on an external drive, perhaps that makes it difficult for Options+... although it works without problems on external drives with older macOS versions.
Update: the problem seems to be connecting Logitech keyboards to a Mac mini M4, connecting Logitech mouses seems to work fine. I tried these four keyboards, and all of them resulted a constant restarting of Options+: MX Keys Mini, MX Keys for Mac, MX Mechanical Mini, and Logitech Craft.
Last edited:
Arcudi
macrumors newbie
Adobe Illustrator 2026 (30.5.1) and the Beta (30.7) both work, with a caveat: they take about ~10–15 minutes to start working. Beach balling while it all loads up, and then it starts working. Found out accidentally while I stepped away after launching it.
flowrider
macrumors 604
Logitech Options+ (Version 2.4.903778) works for me on both my M2Ultra Mac Pro and my M4 MBA. MXMaster3 and MXMaster2S.
Lou
southerndoc
Contributor
Like @flowrider, Logitech Options+ is working for me on my M4 Max Mac Studio and Anywhere 3S for Mac mouse.
Arcudi
macrumors newbie
Just tested out Adobe InDesign 2026 (21.4.1). It's working just fine. I was able to open some files, edit, and save, all without a problem. I've previously also had a problem saving files to a network drive, but looks like the new SMB only protocol has fixed that issue for me, as well.
Jakimo
macrumors 6502a
Looks like Bartender is the first to drop initial support for menubar management for Golden Gate specifically: https://www.macbartender.com/goldengate/releases/
kvlq
macrumors 65816
MeasterHD
macrumors member
It is working but functionality have been limited since they’re still trying to figure all out.
Jakimo
macrumors 6502a
Me as well, and then my bad sync issue (mentioned previously in forums) came up. Reinstalled from scratch, and I'm not bothering with Menu Bar management software now.. I simply turn off what I don't need and use Menu Bar Spacing and Spaced to augment
I think my days of Menu Bar management 3rd party software are over (besides adding spaced separators and controlling the spacing between the icons, as I mentioned)
Gary L. Gray
macrumors newbie
Thaw also has some initial support, though I am not running Golden Gate and have not tried it.
[Help wanted] macOS 27 Compatibility · Issue #687 · stonerl/Thaw
Pre-submission Checklist I searched existing issues (open & closed) and found no duplicates Problem / Use Case Thaw not working on Golden Gate! Proposed Solution Update Thaw to make it compatible w...
github.com