Ringke Fusion iPhone 6 / 6 Plus case - thoughts?

[Allthings-I]

Guys after 3 months of the Ringke Fusion case, I would recommend the gray / black over the crystal clear, my case is starting to discolor on the sides (the rubber portion) the back will not discolor because it is hard plastic rather than rubber.

I think the gray / black sides on those cases will show less to no discoloration.

I am still very happy with the case, considering it i got it below $10 at launch, its still one of my highly recommended cases, but I wanted to share this with you.

 

[vmaniqui]

I am still very happy with the case, considering it i got it below $10 at launch, its still one of my highly recommended cases, but I wanted to share this with you.

i have one too and got it for about the same price as yours. now they're back up to $22++. i like it a lot but i got the crystal one. we'll see how it goes with the discoloration but on the plus side, it's really a nice case. highly recommended.

 

[dancedreamfly]

I love my Fusion, but had to ditch it in favor of the Slim because it didn't play nice with my e2e tempered glass protector.

 

[tops2]

Guys after 3 months of the Ringke Fusion case, I would recommend the gray / black over the crystal clear, my case is starting to discolor on the sides (the rubber portion) the back will not discolor because it is hard plastic rather than rubber.

I think the gray / black sides on those cases will show less to no discoloration.

I am still very happy with the case, considering it i got it below $10 at launch, its still one of my highly recommended cases, but I wanted to share this with you.

My coworker had it for ~2 months and his discolored to blue. He suspects it's cause he always wears jeans...

 

[Allthings-I]

My coworker had it for ~2 months and his discolored to blue. He suspects it's cause he always wears jeans...

Mine got brownish yellow lol...

Its basically the same rubber just designed with perfection as found on those $1 cases.

they should come up with some sort of anti-discoloration coating.

regardless still my #1 recommended cases, i got at least 10 people on it so far lol

 

[01silver4]

My coworker had it for ~2 months and his discolored to blue. He suspects it's cause he always wears jeans...

Bought the mint clear for my wife gold 6 and it turn to bluefish color around the TPU section. In week try to reach out to Ringke up until now they didn't get back to me about the case. This was on 10/7, however that case is long gone. Bought her the CaseMate tough clear case for her 6. Got the Ringke smoke clear for my SG 6+ the only problem I am having the the the TPU by the home button is starting to sag a little bit. The case has been on my 6+ since 10/16.

 

[tops2]

Got the Ringke smoke clear for my SG 6+ the only problem I am having the the the TPU by the home button is starting to sag a little bit. The case has been on my 6+ since 10/16.

Lol...my coworker's also sagged around the home button. He switched back to his Apple leather case and am waiting for an Incipio one.

 

[shamashu]

Lol...my coworker's also sagged around the home button. He switched back to his Apple leather case and am waiting for an Incipio one.

What do you mean by sagging? Can you post a pictures?

 

[tops2]

What do you mean by sagging? Can you post a pictures?

It's edge of the case below the home button should sit tight around the edge of the iPhone. That edge I believe is just a thin-ish piece of the case material due to the cutout for the lighting cable. On my coworker's at least, it seemed like that piece has stretched and no longer sits flush against the phone. Don't know if this affects other Ringke Fusion cases, but it happened to my coworker.

I have a Spigen case similar to this Ringke one and I don't have this problem.

 

[shamashu]

It's edge of the case below the home button should sit tight around the edge of the iPhone. That edge I believe is just a thin-ish piece of the case material due to the cutout for the lighting cable. On my coworker's at least, it seemed like that piece has stretched and no longer sits flush against the phone. Don't know if this affects other Ringke Fusion cases, but it happened to my coworker.

I have a Spigen case similar to this Ringke one and I don't have this problem.

Not yet manifesting in Ringke Slim black

 

[01silver4]

Not yet manifesting in Ringke Slim black

Don't believe the Ringke slim will have this problem, because its a different design.

 

[01silver4]

Lol...my coworker's also sagged around the home button. He switched back to his Apple leather case and am waiting for an Incipio one.

Yea I don't have it on the my phone anymore. I have multiple cases that I use from time to time. Apple black leather case, Air Jacket force in smoke color, Spigen tough Armor, UAG Maverick, Apple red leather.

 

[shamashu]

Yea I don't have it on the my phone anymore. I have multiple cases that I use from time to time. Apple black leather case, Air Jacket force in smoke color, Spigen tough Armor, UAG Maverick, Apple red leather.

THats PS.

 

[01silver4]

THats PS.

Yes it is

 

[Allthings-I]

Yea I don't have it on the my phone anymore. I have multiple cases that I use from time to time. Apple black leather case, Air Jacket force in smoke color, Spigen tough Armor, UAG Maverick, Apple red leather.

Thats like the best aligned screen protector i have ever seen on a iPhone lol

 

[01silver4]

Thats like the best aligned screen protector i have ever seen on a iPhone lol

Lol u know this the second screen protector from ZAGG its the HDX model. Apple replace my 6+ in November due to extensive crashing. So ZAGG send me another screen protector for free, the first I didn't do such a good install. And this replacement one was a little better minus the 2 tiny bubble u see there in the photo. Here is a photo of the first one.

 

[Xultar]

I Bought both a clear and a black and they are both sagging by the home button.

I like the case but I am also slow walking the research for another case.

 

[Allthings-I]

Here's pic of mine:

Gold iPhone 6 Plus in "Crystal Clear" Ringke Fusion Hybrid case after 3+ months lol

White Skin = Dbrand.com's Matte White Skin = Amazing, only thing is I think this is with all skin's, they are not tightly stuck on around the volume buttons, seems its the weakness point for everything.

I love the skin, it gave my gold iPhone a new look, I wish apple had made a iPhone with such color, its just beautiful.

Metal Plate = Attachment Disc for my Bungajungle.com's Neutron S which i use to mount of iPhone in the car.

Yellow discoloration....well thats sadly my clear case turning yellow where i hold the iPhone the most from.

 

[arcturuz]

the ringke fusion overall is a great case

however it adds too much bulk for the ip6+, it would be perfect it is slightly slimmer

 

[Allthings-I]

the ringke fusion overall is a great case

however it adds too much bulk for the ip6+, it would be perfect it is slightly slimmer

I don't think it adds any bulk at all, I think many others would agree.

If you go any thinner, then your not getting protection against any kind of drops...thinner cases only provider scratch protection....what good is that?

I've dropped my iPhone 6+ a few times now and so far it as survived the light drops in this case.

 

[01silver4]

I don't think it adds any bulk at all, I think many others would agree.

If you go any thinner, then your not getting protection against any kind of drops...thinner cases only provider scratch protection....what good is that?

I've dropped my iPhone 6+ a few times now and so far it as survived the light drops in this case.

Agree the only problem that I am having with mine, is that it started to sagg below the home button. Other Than that it's a great case.

 

[Appl3FTW]

I love my ringke

 

[Allthings-I]

Agree the only problem that I am having with mine, is that it started to sagg below the home button. Other Than that it's a great case.

I would say mine is sagging like 5%, its barely noticeable...perhaps it was saved b the screen protector I had on it all this time, My original screen protector (just installed glass one two days ago) was one of those that fully goes around the home button / touch ID rather than leave the bottom end open. So maybe that is what is contributing to all you's Ringke sagging under the home button..?

I will follow up in a few weeks if possible regarding my case as the new screen protector is only a few days old.

 

[01silver4]

I would say mine is sagging like 5%, its barely noticeable...perhaps it was saved b the screen protector I had on it all this time, My original screen protector (just installed glass one two days ago) was one of those that fully goes around the home button / touch ID rather than leave the bottom end open. So maybe that is what is contributing to all you's Ringke sagging under the home button..?

I will follow up in a few weeks if possible regarding my case as the new screen protector is only a few days old.

I am using the ZAGG HDX since day one, if u look closely in this photo the ZAGG does not cover all the screen, maybe like 2-3mm is not covered. But my Ringke still sagg by the home button any way even though it's not to the screen protector. Not a big deal though because I use different cases every week lol.

 

[Allthings-I]

I am using the ZAGG HDX since day one, if u look closely in this photo the ZAGG does not cover all the screen, maybe like 2-3mm is not covered. But my Ringke still sagg by the home button any way even though it's not to the screen protector. Not a big deal though because I use different cases every week lol.

if steve jobs designed that case, he would say "your holding it wrong" lolls

all in all mine has not sagged, as I said earlier perhaps 5% sagg vs what you guys are seeing. Strange.