Become a MacRumors Supporter for $50/year with no ads, ability to filter front page stories, and private forums.
I have Whitestone dome glass on my Note 8. They do make them for iPhones so I will be checking on them. Only issue is not compatible with all cases. That could be a Sammy thing though due to the curved edges. Well worth the $$ in my experience

I had it as well, and honestly, there are better ones than the Dome for the iPhone since it's flat mostly. Spigen Glas.TR is the best one I have found for it.
 
Same for me. I actually like the Belkin. Been using since my7+! Been reliable for me.

BUT has anyone noticed if the edges of the Invisiglass Ultra screen protector is displaying any rainbow effect like previous models?
 
Icarez Full 3D worked perfectly this time. Using Incase Lift case. No Issues.
 
Just installed my Spigen GLAS.tR slim HD protector. Same one I had on my X, and it did great.

20180922_174244.jpg
 
I’d like to buy the Spigen Full cover glass (glasTr ez fit): do you know if it is compatible with the Apple leather case or not?
 
Did you order that directly from Spigen?

I did. I couldn't find it anywhere else. It came in 3 days which wasn't too bad.
[doublepost=1537662414][/doublepost]
I’d like to buy the Spigen Full cover glass (glasTr ez fit): do you know if it is compatible with the Apple leather case or not?

The one I have is, but I am not sure about that one.
 
  • Like
Reactions: BrianSoCal
Been using Syncwire since I got the X last year and used it on several X’s at my office and only had a few that did seal perfectly around the edges. Wasn’t a problem though, they replaced it. This time around I’ve used them on two Xs Max’s with no problems. The other thing I like is it doesn’t have the black border or a notch. Hard to beat for the cost and the reviews are BS IMO.

Syncwire iPhone Xs Max Screen Protector - [Face ID Protective Design] SyncProof 2-Pack HD 9H Hardness Tempered Glass for iPhone Xs Max [Force Resistant, Shatter-Proof, Bubble-Free, 3D-Touch] https://www.amazon.com/dp/B07G847BCY/ref=cm_sw_r_cp_tai_V9TPBbRMWMYJK
 
As an Amazon Associate, MacRumors earns a commission from qualifying purchases made through links in this post.
I ordered that too. Was the application easy? Sometimes the bubbles go away over time.

How’s the actual fullscreen coverage? Does it blend in with the front?
In my experience it's very rare that bubbles go away over time. I often find that if you don't get a bubble out right from the beginning, you will be stuck with it and have to re-apply. Fortunately I never get that issue with the Orzly ones, but they do always give a second spare in the box for just in case, so would have come in handy if I accidentally messed up an install. Fortunately it never came to that, so I still have a perfectly intact spare one for if I ever need it.
 
I got the iCarez edge to edge 3D and it's been working perfectly since day 1 with the Nomad rugged case. The alignment with the case is so good that I can't even see the original iPhone glass anymore and likely won't until I sell/trade in the phone.

In fact my wife's iPhone Xs came in the other day and I installed the screen protector without telling her and until I mentioned it, she hadn't noticed that there was a screen protector on it (+ the apple silicone case).

https://www.amazon.com/iCarez-Cover...fa0bd14fe81502e39a9a28de25dc52&language=en_US

Edge to edge is the only way to go, IMO.
 
As an Amazon Associate, MacRumors earns a commission from qualifying purchases made through links in this post.
  • Like
Reactions: Truefan31
Just installed the Bodyguardz Pure 2 Edge and it when on PERFECT like a dream. I've installed hundreds of protectors over the years and never had one install this smooth without not even the tiniest bubble. I know this protector is not cheap but I had a Bodyguardz save my iPhone X from a face down drop on a pile of rocks so I went with them again.

Just worried about cases peeling up the corners (case friendly). I report later after I try on a few cases.

bg01.jpg
bg02.jpg
bg03.jpg
 
Last edited:
  • Like
Reactions: CVUSA and Mr.C
Just received the iCarez 2.5D for my XS Max today. Went on without issues using the provided alignment tray. Using it with the Ringke Air case and it fits perfectly. Just a tiny, tiny gap between the edge of the glass and the case. Can’t even tell I have a screen protector on. Loving it so far!

59D9A401-3E42-44F9-8F8E-FDB94CDBF89C.jpeg


DC5918FA-D905-4116-B74C-4CDC427054AA.jpeg


4ADEA3B6-84FA-4372-8974-4695C0321FE3.jpeg


ABA7B070-FA62-451E-AA0B-07F5314DE77C.jpeg


CC631033-B175-4494-821C-17D8E2DA7630.jpeg


C626C021-41FE-4290-BBCF-41EA19079EEC.jpeg


D1360D04-1D9B-47AB-A5D4-8EA596F3F7B3.jpeg


AFAB0E5F-AA47-4582-B4C6-42D2EBBC6C76.jpeg
 
Last edited:
Look for one called Meidom.

1EE39076-65DB-4F12-924C-E1A59C863FEC.png


I got it on sale on eBay Australia for A$1.70 and it’s a perfect fit. There are no sharp edges at all where you swipe up - it curves down to meet the stainless steel band. Here it is paired with Apple forest green.

8F21A735-C4A9-4A42-872B-E60207297D61.jpeg
 
  • Like
Reactions: blaine07
Anyone recommend a 2.5D with nice rounded/curved edges?
Don’t trust these 3D ones with black edges as those parts usually don’t have any adhesive.

I’m leaning towards a 2.5 with nice rounded edges so my fingers don’t get caught.
 
Register on MacRumors! This sidebar will go away, and you'll see fewer ads.