Is there any consensus on which screen protector is least noticeable? I haven't used one in years but thinking about getting one for my 17 Pro. Another issue I had the last time I used one was the amount of smudges it got.
Got a tip for us?
Let us know
Become a MacRumors Supporter for $50/year with no ads, ability to filter front page stories, and private forums.
iPhone 17/Air/Pro/Pro Max Screen Protectors
- Thread starter Sal09
- Start date
- Sort by reaction score
Noticed my Benks Warrior Sapphire is not quite centred 🫣, noticed a slightly bigger gap on the right side to case lip and on checking the border is encroaching the screen a tiny amount. Will try to ignore it as I have a similar thing the last two phones, lol.
If it bothers me I'll try to re-apply it by hand with a different brand as back up if I mess it up.
If it bothers me I'll try to re-apply it by hand with a different brand as back up if I mess it up.
I was asking the same thing. I don’t see any, though there are a few companies making skins for the full body. You could buy a full body skin for now and only use the plateau portion, or wait it out until someone does offer one.
O
same thing happened to me it didn’t line up properly. Even though I tried lining up before installing.
It fits well honestly. Only complaint is that the edges aren’t as rounded or smooth as the OrigArmor was on my 16P.
Returned the ESR Amorite 7x protectors. Black border of death was such a disappointment. Picked up some Dbrand Prism today at Best Buy and fits like a glove with no black borders. Definitely a keeper for the time being.
man no room for error on that install, looks good tho! only downsides of these is they usually pick up a lot of lint on the edgesReturned the ESR Amorite 7x protectors. Black border of death was such a disappointment. Picked up some Dbrand Prism today at Best Buy and fits like a glove with no black borders. Definitely a keeper for the time being.
Not sure how anyone can stand seeing the edge of a screen protector.
Same with my base and the Amorite, along the bottom corner edge a whole section just will not stick. Also wary of the black border but can't really tell so far. Will give it a few days to see if the edge seals or not but think bc its an edge it won't. Bummer.
That’s a shame.
Yeah I don’t like seeing the edges either. Prefer the black borders as long as it doesn’t cut into the screen.
Get the origarmor, it’s better than the flolab, and its oleophobic coating lasts longer. Flolabs wears off fast
TORRAS Screen Protector
TORRAS for Phone 17 Pro Screen Protector [3D Full Coverage Fit] [100% Anti Glare] Military-Grade Shatterproof 9H+ Tempered Glass Anti-Scratch Screen Protector 17 Pro 6.3" 1-Pack
a.co
As an Amazon Associate, MacRumors earns a commission from qualifying purchases made through links in this post.
How’s edge coverage compared to the Shellrus you has previously?TORRAS Screen Protector
TORRAS for Phone 17 Pro Screen Protector [3D Full Coverage Fit] [100% Anti Glare] Military-Grade Shatterproof 9H+ Tempered Glass Anti-Scratch Screen Protector 17 Pro 6.3" 1-Packa.co
As an Amazon Associate, MacRumors earns a commission from qualifying purchases made through links in this post.
I did the sinful thing and paid $25 for Zagg + $8 for install from Best Buy.
The dude seemed to really know what he was doing, the margin of the thin borders from that to possible curving of the front or where it meets the front edge of my case seems narrow.
Free replacement and install as needed too. I figured 'screw it' considering phone is the only thing I use with a screen protector of all my devices (notwithstanding like the Switch 2, but I did that myself with relative ease)
The dude seemed to really know what he was doing, the margin of the thin borders from that to possible curving of the front or where it meets the front edge of my case seems narrow.
Free replacement and install as needed too. I figured 'screw it' considering phone is the only thing I use with a screen protector of all my devices (notwithstanding like the Switch 2, but I did that myself with relative ease)
Shellrus, Hodas, and any other real sapphire protectors will always have less coverage since they cannot make curved edge sapphire screeen protectors.
Origarmor has excellent edge coverage considering it is a 3d curved edge like the flolab.
Torras AR seems decent. Not as good as flolabs but better than their standard glass. It does seem prone to scratches. The fit is excellent and I don’t think it’s cutting into the screen
I don’t understand why Flolab doesn’t have their 3D edge version yet like they finally released for the 16. The Fitbit the earlier versions wasn’t good. Their 3d edge version was perfect. The torras fits very nicely. Doesn’t seem to cut into the screen. Mine has a scratch on it from the box so I am getting a replacement but this one did align perfectly so I hope I can replicate that. Honestly the AR is decent but Flolab is better and the polarspectra is something I really like.
Has anyone bought the Flolab that exists for the 17 series? What is the edge and fit like?
Has anyone bought the Flolab that exists for the 17 series? What is the edge and fit like?
TORRAS Screen Protector
TORRAS for Phone 17 Pro Screen Protector [3D Full Coverage Fit] [100% Anti Glare] Military-Grade Shatterproof 9H+ Tempered Glass Anti-Scratch Screen Protector 17 Pro 6.3" 1-Packa.co
So what I ordered was evidently similar? They have so many SKUs for everything lol
TORRAS Screen Protector
TORRAS for 17 Pro Privacy Screen Protector [25° Anti Spy] [Military-Grade 9H+ Aerospace Tempered Glass] Anti-Scratch Full Coverage Fit Privacy Screen Protector 17 Pro 6.3" 2-Pack
a.co
As an Amazon Associate, MacRumors earns a commission from qualifying purchases made through links in this post.
Looks like you ordered the privacy versionSo what I ordered was evidently similar? They have so many SKUs for everything lol
TORRAS Screen Protector
TORRAS for 17 Pro Privacy Screen Protector [25° Anti Spy] [Military-Grade 9H+ Aerospace Tempered Glass] Anti-Scratch Full Coverage Fit Privacy Screen Protector 17 Pro 6.3" 2-Packa.co
Last edited:
As an Amazon Associate, MacRumors earns a commission from qualifying purchases made through links in this post.