Become a MacRumors Supporter for $50/year with no ads, ability to filter front page stories, and private forums.
if you apply the screen protector, can you remove it and reapply it, say, two weeks later? Or will taking it off after that amount of time destroy it?

You probably could, the only thing is to keep it from getting dust stuck to it. I thought about taking it off then sticking it to a clean bathroom mirror until you need to re-apply to the phone.
 
Hi Dragonforce,

I am quite interested in the power support anti-glare and Crystal screen protector including front and back(the whole set)I think it comes with all of these in one pack.If you PM me your email I will
Contact u with my details so that u can post it to mr when it's here with you.And then I can transfer the money to ur account.Kindly let me know if I could be included in your list.I wanted the set that contains anti-glare and the Crystal screen protector both front & back.
Sorry I was not able to PM u.

Thanks
 
Unfortunately, the order has been placed about 6 hours ago.
I'm sorry mate, you're too late :( otherwise I would have included you on the list
 
Unfortunately, the order has been placed about 6 hours ago.
I'm sorry mate, you're too late :( otherwise I would have included you on the list

Hi Dragonforce,

Thanks for your prompt reply.It's alrite.My bad luck.If in case you get to have it extra or if any place in UK where I can get it later do let me know.

Many thanks

Cheers:)
 
They just updated their products page with 2 more combos. Just ordered the 2-piece crystal front and back film set since I will not be using the anti glare one. I saved $5 in the process.

Lets see how the install goes...
 
if you apply the screen protector, can you remove it and reapply it, say, two weeks later? Or will taking it off after that amount of time destroy it?

You probably could, the only thing is to keep it from getting dust stuck to it. I thought about taking it off then sticking it to a clean bathroom mirror until you need to re-apply to the phone.

I used Press-N-Seal plastic wrap to store my iPad screen protector when I wasn't sure I wanted it on. Took it off the iPad, put it on the plastic wrap, put it back on the iPad later. No issues.
 
They just updated their products page with 2 more combos. Just ordered the 2-piece crystal front and back film set since I will not be using the anti glare one. I saved $5 in the process.

Lets see how the install goes...

So that only comes with one front shield and one back shield though, right? Hopefully you get it right the first time.
 
They just updated their products page with 2 more combos. Just ordered the 2-piece crystal front and back film set since I will not be using the anti glare one. I saved $5 in the process.

Lets see how the install goes...

Thanks for the notice. And also noticed all combos are showing back In-Stock vs Pre-Order so they must have gotten a new shipment in. I canceled my 3 pc set and ordered the crystal 2pc front/back set since I never planned to use the anti-glare screen.

Just saw a friends PS crystal flim and his lined up well with the camera, home button, etc, but he did have some bubbles around the edges. He said other than the bubbles he's had no issues with it. It's got some scratches on the back which otherwise might have ended up on the glass.
 
How long are orders being processed in the U.S.? Between the time that it is ordered and actual shipping and day of receipt... Any testimonials?

I'm looking to order and need to have an Idea. Thanks!
 
I got the set yesterday with the 2 Crystal front protectors, and I am not pleased. I have the crystal on my ipod touch and it's been perfect since day 1, so I'm disappointed that these are not the same. My cut-outs are really, really off. I installed both protectors multiple times, and the absolute best I could do is what is on there now. If the home button is centered, the front facing camera is half-covered. If the camera is straight, the protector hangs over the home button. It's also got a large air bubble down one side which I think is because it might hang over a bit. I know this isn't the case for everyone, since I've seen perfect installs, but I'm both disappointed and frustrated.


I had the SAME thing.

I just fixed it by taking it off with scotch tape and reapplying it using the TOP of the screen to line it up rather than the bottom with the home button.
Now it aligned perfectly and it feels great.

I hate Zaggs. MY PS Crystal Set is sweet.
 
How long are orders being processed in the U.S.? Between the time that it is ordered and actual shipping and day of receipt... Any testimonials?

I'm looking to order and need to have an Idea. Thanks!

I ordered mine Wednesday, it shipped Thursday and received it on Saturday. Of course, both PowerSupport and myself are in California so...your time may vary.
 
So that only comes with one front shield and one back shield though, right? Hopefully you get it right the first time.

Correct. It works better for me since I wasn't planning to use the anti glare film because I want to enjoy the retina display.

Based on what I have read here, is it safe to say that we should line up the film starting at the top of the phone and working our way down to the home button compared to the opposite way?
 
Thanks for the notice. And also noticed all combos are showing back In-Stock vs Pre-Order so they must have gotten a new shipment in. I canceled my 3 pc set and ordered the crystal 2pc front/back set since I never planned to use the anti-glare screen.
The 2 new products are on backorder now. They must have gotten flooded with orders for them but I did place the order when they were "in stock" so I am hopeful they get it out quickly since I will be getting my phone on wednesday.
 
Damn now I can't decide between this Power Support or SGP. I just want the one closest to the original phone look and feel. I don't want anti glare or any blur.

Also, has anyone seen a colored version of the back protection instead of clear? I thought I saw a pic here last week in black or white but can't find it.
 
Received my front and rear kit today. Put the rear on and anti glare on front. Fitment is great. I don't mind the anti glare really but will probably put the crystal on.

And these have some sort of adhesive on them just like the SGP.
 
Got my anti-glare protector today. Ordered on Thursday, got it today. I'm in North Carolina and selected the "cheap" $6 USPS shipping.

Went out with little difficulty. I don't think there's any adhesive on these, I was able to easy remove / reapply it several times while getting it lined up.

I have the same anti-glare protector on my ipod touch and I dig it on my iphone. Good purchase over all, reduces the glare quite a bit.
 
I diddn't like the anti-glare because it makes the image on the screen look fuzzy and takes away from the quality
 
Register on MacRumors! This sidebar will go away, and you'll see fewer ads.