Become a MacRumors Supporter for $50/year with no ads, ability to filter front page stories, and private forums.
Got the crystal set for my wife's phone. After a somewhat long install process, I can't seem to get rid of some air around the home button and the front camera. Back shield was cake to get on, but the front is causing problems. I'm going to let it sit overnight and see how it is in the morning. It looks like it's aligned pretty well so not sure how to alleviate.
 
does the 'front + back' power support film with bumper work?

ok. I just got my free bumper today. and I absolutely love it! I am for sure using the bumper. and of course I will need some front and back film protection. and I like the power support films (not a fan of those ZAGG thingy). I am just wondering if the bumper will fit after i put the front and back PS films on? i heard the bumper will cause the film to bubble up. but yours looks fantastic! wonder if bumper will work with front and back PS films applied.
Thanks
 
Tips to Installation
(I'm sure there are other great ways from other members, but this is what I did to make it look like the photos i took)

- When i installed it, I ripped off the middle section part, then i held onto the edges of the outer backing that has not yet been removed. I tried to align first the front camera and speaker and then simultaneously looking at the home button before pressing down on the middle section and letting it cling.

- If you have problems, just lift up the exposed mid section and try again, it takes a little bit to align it right, just depends on how anal you are.

- If you do align the home button and camera and speaker the outside should align itself.

- Once the three key sections are aligned and the mid section is static clung to the screen, hold onto the mid section that is already clung onto the screen and rip off the other sections and you should be complete.

Not sure if this is easy to explain through words. Maybe i'll learn how to do video clips in the future that look professional.

I don't understand your instructions. A video would be very helpful!
 
ok. I just got my free bumper today. and I absolutely love it! I am for sure using the bumper. and of course I will need some front and back film protection. and I like the power support films (not a fan of those ZAGG thingy). I am just wondering if the bumper will fit after i put the front and back PS films on? i heard the bumper will cause the film to bubble up. but yours looks fantastic! wonder if bumper will work with front and back PS films applied.
Thanks

I don't understand why the bumper would cause the film to bubble up. Won't the bumper go over the edges of the phone?
 
I installed my front/rear Crystal set last night. Absolutely stunning screen protector. The install was cake and it looks great. You can't tell it's on there.

I'm using it with a black bumper, and I have zero issues. I couldn't be happier.
 
my power support crystal front/back appear to be an oil/dust magnet. A little harder to clean off than the original glass. Anyone else feel this way?
 
my power support crystal front/back appear to be an oil/dust magnet. A little harder to clean off than the original glass. Anyone else feel this way?

Yes, I'm going to remove mine and my wifes. We are tired after 4 days of use. We went 1 month without any and it was easy to clean. In the end, it only a phone.:)
 
which one to get from power support?

- 2-piece Crystal Screen Film Set ( so does this one have 1 for the front and a extra one for the front?)
- 3-piece Front and Back Film Set ( so does this one have 1 front, 1 anti glare for the front, and one for the back?)
- 2-piece Crystal Front and Back Film Set ( so does this one have 1 for the front and 1 for the back)

do you have pictures of the back?

what would you say about resistant to scratches? i want it to prevent it on back

and when you put it on the back do they bubble up? when you put the case on then?

which one from the top is the best?
 
- 2-piece Crystal Screen Film Set ( so does this one have 1 for the front and a extra one for the front?)
- 3-piece Front and Back Film Set ( so does this one have 1 front, 1 anti glare for the front, and one for the back?)
- 2-piece Crystal Front and Back Film Set ( so does this one have 1 for the front and 1 for the back)

do you have pictures of the back?

what would you say about resistant to scratches? i want it to prevent it on back

and when you put it on the back do they bubble up? when you put the case on then?

which one from the top is the best?

You are correct about what is in each package. If you know which front you want you might as well get the 2-pc front and back set.

My husband had no issues with the back bubbling with a case.
 
how good is it to resistance to scratches?

is the 2 piece front and back film good agaisnt scratches?

i know that this is the best for the crystal clear quailty but what about the back film for scratches?

im going to put a bumper/case on there but i also want to make sure it protects it from scratches.
 
Has anyone got any pictures of the Power Support Anti-Glare HD?

Also does it get that many fingerprints and what is the screen like?
 
For those that have already ordered and received theirs, if your order status says complete does that mean its ready to be shipped or its already been shipped?
 
Has anyone got any pictures of the Power Support Anti-Glare HD?

Also does it get that many fingerprints and what is the screen like?

There are a few threads in the hd anti glare including 1 posted by me. I went from sgp oleo to ps anti glare. Resists finger and oil really well. Love it!
 
My order shipped and I never received a shipping notification. I would assume completed means shipped.
 
Register on MacRumors! This sidebar will go away, and you'll see fewer ads.