Become a MacRumors Supporter for $50/year with no ads, ability to filter front page stories, and private forums.
Power button can be a long press to turn on and off. Volumes can be a press to activate followed by more presses to change the volume. The silent switch can be placed in the Focus spot or somewhere else in there when you swipe down from top right. USB-C on the Pro models better not be 2.0 speeds.
 
I would love to get "touch-id" back that way. Best if the home button function may be included again, on the side.
Face-ID and no home buttom was uncomfortably to use so I sticked with iPhone SE2 and will upgrade some time otherwise to iphone SE3.
 
I guess the 2 extra ones would be for the left (volume and mute) and one on the right (sleep) so you can still feel 2 distinct clicks when pressing both sides for a screenshot. I can't imagine that being more compact, cheaper or more cost effective than the current physical buttons.

Maybe for an "iPhone Ultra" that has a good reason to be very well sealed and can be bulkier?
 
I’m hoping future iPads (especially mini!) have at least one Taptic Engine for onscreen keyboard feedback like iPhone. It’s a great improvement over audio clicks as long as Apple can maintain low latency with new OS versions on older devices.
 
  • Like
Reactions: blackNBUK
Don't you need "real" buttons to turn on or force restart the device? Otherwise some part of the software needs to always work/run.
I thought the solid state buttoned ipod way back in the allowed a reset but holding a combination of solid stat buttons to do a reset? But maybe I'm remembering incorrectly.
 
Well, call me old-fashioned, but I prefer actual, mechanical buttons. I'm sure there's a way to better waterproof the damn phone and still have real buttons.
 
  • Like
Reactions: compwiz1202
If true absolutely and utterly pointless and over complicates simple things and will push the price up no doubt, sounds like it’s just a desperate measure for Apple to differentiate the ‘Pro’ iPhone from the standard one and an attempt to try to justify its price difference. IMO.
 
  • Haha
Reactions: NetMage
I suspect that it gets them closer to fully waterproofing the device.

On one of my early iPhones, the buttons became worn, so it would take several presses sometimes to register. For years afterward, I tried to limit how frequently I pressed the buttons.
Yes and yes. The space around mechanical buttons is no doubt one of the most significant hurdles to keeping water out. Eliminating that is good for everyone. And I have also experienced button failure before -- I had a home button die on a prior iPhone and I'm sure that can happen to the current volume and power buttons as well.

The downside, as others have noted, is that case manufacturers will either have to leave the buttons uncovered or will have to add something to their cases to make this work through the case. I'm far from an expert on this, but I doubt it would be particularly difficult to implement a finger-conductive pass through.
 
I love this functionality on Mac trackpads and will welcome it if added to iPhone 15, but I can echo the concerns about having a non-physical power button. Seems necessary, but that's why I don't work at fruit company.

Fruit company sometimes uses products shipped to hundreds of millions of users to explore technological fetishes at the expense of users. That can be a drag, and hopefully not the case here.
 
Now you really wonder if the iPhone 15 will be a ground-up redesign of the entire chassis. The possibility of looking like a thicker iPhone 11 but with USB Type C port that supports Thunderbolt 3/USB Certified 10 Gbps connectivity and solid-state buttons on the side may not be so far-fetched.
 
The great feature they knowingly and silently gimped on iPhone X when updating to iOS 13, simply to "lowest common denominator" their entire iPhone lineup and skimp on the hardware requirements?

Yeah, I'll not hold my breath.
I liked 3D touch, but i think display was thicker with 3D touch so they had to make display stack thinner to make room for larger battery.
 
For me haptic feed back works on Apple touch pads, but I have an elderly relative who is adamant that she can’t feel the click.
Could that be why I never felt keyboard haptics? The funny thing is I felt is when I toggled the setting, even when that because much weaker in the later beta versions.
 
1. 😂😂😂
2. What change? Oh you mean the unsubstantiated rumour…
3. Is it needless to make an iPhone less susceptible to water damage?
4. I say it’s probably more like a $20 increase, but then I have as much clue as you.
5. People who "know" why Apple make changes and the reason behind them, are just kidding themselves.
2. Well, we are on MacRUMORS and allowed to comment on rumors…
3. iPhone is already well protected against water damage. For years it’s been.
4. $20 in parts does not a equal $20 price increase, but like you, I’m no expert, either.
5. At the end of the day, they are a business and all their decisions will ultimately come down to money. Anyone who says otherwise is just kidding themselves.
 
The Pro and Pro Max models are perhaps due for (U.S.) price increases. Despite various improvement and recent high inflation, they are still priced the same as or less than they were when first launched back in 2019.
I was hoping only the rumored iPhone Ultra would get the larger price tag, but I suspect both sizes will, now.
 
  • Love
Reactions: transpo1
Closer to portless & waterproof.

I just wanna easier way to do a DFU.
Going to wireless and dropping the short-lived USB-C port would be the final step then. Maybe the next insight from Kuo over the coming months will be Apple has decided that it won’t switch to USB-C and will go wireless instead.
 
  • Like
Reactions: zapmymac
Register on MacRumors! This sidebar will go away, and you'll see fewer ads.