Toggle sidebar Toggle sidebar
Become a MacRumors Supporter for $50/year with no ads, ability to filter front page stories, and private forums.

macOS 13 Ventura on Unsupported Macs Thread

Status
The first post of this thread is a WikiPost and can be edited by anyone with the appropiate permissions. Your edits will be public.
rayman18 said:
same hardware and OS. I have a problem with TV app that I haven't on macOS 12, I can't play any content because the window closes. Are you be able to use Apple TV App with that config?
Click to expand...
Yes, same on mine. I click on play, the black & white banner screen loads, the chime sounds, and it goes back to the selector screen. I got some of the trailers to play, e.g. Zappa, Jagger, but some don't.
 
Last edited:
  • Like
Reactions: NataliaC and rayman18
educovas said:
USB hub is still needed for Macs with USB 1.1. Any USB 2.0 hubs should work.

We couldn't get display output with Navi GPUs on non-AVX Macs. No idea if we'll ever be able to get it working.
Click to expand...
Well then according to my system report I should be good?
 

Attachments

  • Screen Shot 2023-06-02 at 2.43.01 PM.png
    Screen Shot 2023-06-02 at 2.43.01 PM.png
    489.2 KB · Views: 177
rayman18 said:
same hardware and OS. I have a problem with TV app that I haven't on macOS 12, I can't play any content because the window closes. Are you be able to use Apple TV App with that config?
Click to expand...
Apple TV is broken on 13.3+ in apparently every GPU. From my investigations, something in CoreMedia seems to have changed.

I managed to get it working on AMD GPUs patching the AMDFramebuffer but I don't know if that's going to be in OCLP.
wwise said:
Well then according to my system report I should be good?
Click to expand...
Low power devices like keyboard, mouse and the bluetooth card runs through USB 1.1.
 
  • Like
Reactions: ASentientBot, Sanmiguel71, rehkram and 2 others
educovas said:
Apple TV is broken on 13.3+ in apparently every GPU. From my investigations, something in CoreMedia seems to have changed.

I managed to get it working on AMD GPUs patching the AMDFramebuffer but I don't know if that's going to be in OCLP.

Low power devices like keyboard, mouse and the bluetooth card runs through USB 1.1.
Click to expand...
So I do need a hub- ok - does it matter which port ?
 
reverted patches on 13.5 beta 1 . OTA to beta 2 at 771mb went through no problems and then patched again using AMFIPass Beta.
AppleTV works on new episodes but normally have to patch with OCLP reboot , login then reboot again and then it will play episodes after first reboot after patching box pops up then disappears second reboot plays fine.
 
Last edited:
  • Wow
  • Like
Reactions: MacRumors3590 and Larsvonhier
TOM1211 said:
reverted patches on 13.5 beta 1 . OTA to beta 2 at 771mb went through no problems and then patched again using AMFIPass Beta.
AppleTV works on new episodes but normally have to patch with OCLP reboot , login then reboot again and then it will play episodes after first reboot after patching box pops up then disappears second reboot plays fine.
Click to expand...

Same here, OCLP 0.6.7 didn't work with AMFI enabled and Validation Library enabled; reverting to AMFIPass Test 2 everything was back to normal, working like a charm.

macOS Ventura 13.5 beta 1
AMFIPass Beta
 
  • Like
Reactions: hvds
webg3 said:
Same here, OCLP 0.6.7 didn't work with AMFI enabled and Validation Library enabled; reverting to AMFIPass Test 2 everything was back to normal, working like a charm.

macOS Ventura 13.5 beta 1
AMFIPass Beta
Click to expand...

OCLP 0.6.7 Release does not include AMFIpass kext.
This is why enabling AMFI does not work when using the release version.
Dhinak told on Discord a third beta version will be released at some point.
So, if you need AMFI enabled, stick with AMFIPass Beta2 for now.
 
  • Like
Reactions: luckyduke23, chris1111, makra and 2 others
based_tea said:
so....I messed up ventura installation using opencore, i tried fixing it but just ended up digging a deeper hole and now whenever i turn my macbook on im presented with
[Bootkicker.efi / Openshell.efi / ResetNVRAM]

help!!
Click to expand...
HI Tea, It happened to me samething with Ventura, could you fix your problem?, I am stock and dont know what to do
 

Attachments

  • image_50381569.JPG
    image_50381569.JPG
    449.2 KB · Views: 370
DarkPremiumCho said:
I guess your macOS Recovery partition is damaged so it's not possible to get into Recovery Mode.

Have you reset the NVRAM yet? If not, your machine will still boot to OpenCore. In that case, your Option-Shift-Command-R key combination could be sent to OpenCore.

To enter internet recovery mode, make sure you press Option-Shift-Command-R early enough (immediately when you hear the startup chime or see the Apple logo light) so the signal can be sent to the firmware, not OpenCore.

If the problem persists, there could be something else wrong. I would suggest that you check if pressing the Option key takes you to the boot device selection menu. Only if the Option key works can we proceed to the USB installation way.

I assume you have a PC? You may try gibMacOS (open source software) though I am not sure if it works in this situation.
Click to expand...
Hi Dark, can you please help me, I am stuck in this, already resat NVRAM dont know what to do. thank you.
 
chris1111 said:
I don't understand why people mix OCLP Release
with OCLP AMFIPass Beta Test? That does not make any sense!
Click to expand...
both versions have it internally as OCLP 0.6.7, if you look at the last print I posted, it's from AMFIPass but it appears as OCLP 0.6.7, that's why there's no confusion, it's just how it was presented, and we all hope that the version end had AMFIPass implemented. They should have put a note about it in the Release and not inform it through Discord, not everyone follows it there.
 
  • Like
Reactions: TimmuJapan
Today I have a question and a problem. Appreciate your help

For years I work with two system, an external usb and the internal one. Usually when I change between them I have to resolve a problem with iCloud and it ask me the pass and the six code of 2pass protect. I switch between 13.2.1 and 13.4 but it's a common issue to me when switch with other older system

The question is about copying file to /System/Library/LaunchAgent/ folder I'm following a tutorial that order me disable SIP, I have to do it through OCPL Patcher in Settings/Security tab. After Build, install OC and Root Patch ... I'm still not able to copy anything in System/Library/LaunchAgent folder, I have a forbidden signal

1685868186841.png



Anyway I see the next problem when I try to change permission

sudo mount -uw / mount_apfs: volume could not be mounted: Permission denied mount: / failed with 66
 
Last edited:
  • Like
Reactions: Lgga74
alfon_sico said:
Today I have a question and a problem. Appreciate your help

For years I work with two system, an external usb and the internal one. Usually when I change between them I have to resolve a problem with iCloud and it ask me the pass and the six code of 2pass protect. I switch between 13.2.1 and 13.4 but it's a common issue to me when switch with other older system

The question is about copying file to /System/Library/LaunchAgent/ folder I'm following a tutorial that order me disable SIP, I have to do it through OCPL Patcher in Settings/Security tab. After Build, install OC and Root Patch ... I'm still not able to copy anything in System/Library/LaunchAgent folder, I have a forbidden signal

View attachment 2211616


Anyway I see the next problem when I try to change permission

sudo mount -uw / mount_apfs: volume could not be mounted: Permission denied mount: / failed with 66
Click to expand...
You can't directly mount the root volume since Big Sur, you need to mount it a different place, do your changes then create a new snapshot.

github.com

OpenCore-Legacy-Patcher/resources/sys_patch/sys_patch.py at main · dortania/OpenCore-Legacy-Patcher

Experience macOS just like before. Contribute to dortania/OpenCore-Legacy-Patcher development by creating an account on GitHub.
github.com github.com

The process is described there.
 
  • Like
Reactions: perez987 and sinbad21
Anyone reporting Microsoft Office files when trying to edit a excel file and continuos restarting the app?

- ventura 13.4 + amfi beta 2 OCLP


I have similar error with Safari if I use copy paste with cmd+C or cmd+V. No problem when I use "copy" "Paste" in menu bar or mouse right button
 
You must log in or register to reply here.
Register on MacRumors! This sidebar will go away, and you'll see fewer ads.
Top Bottom
Back